My ExportersIndia

For Buyer

For Seller

For Help

Our Products

We offer the best product range of Stainless Steel Needle Valve, Stainless Steel 304 Seamless Pipes, Stainless Steel 304 Welded Pipes, Inconel 600 Pipes and Hastelloy C22 Pipes.

Stainless Steel Needle Valve

  • Size 1/8 to 1 inch
  • Temperature 20 to 650°F (-28 to 343°C)
  • Working Pressure Up to 6000 psi g (413 bar)
  • Type Male Female Thread, Screwed, Tube OD, Socket Weld
  • Flow Coefficient Up to 2.25
View Complete Details

Stainless Steel 304 Seamless Pipes

  • Outer Diameter 1/8″ NPS to 12″ NPS
  • Length Upto 30 meters, Custom Cut Lengths
  • Range 6NB to 1200NB
  • Wall Thickness 0.6 mm to 12.7 mm
  • Schedules 5, 10S, 10, 30, 40S, 40, 80, 80S, XS, 160, XXH
  • Specifications ASTM A312 / ASTM SA312
  • Types Round, Square, Rectangle, Coil, “U” Shape, Hydraulic
  • SS 304
  • Ni 8 – 11
  • Fe Balance
  • Cr 18 – 20
  • C 0.08 max
  • Si 0.75 max
  • Mn 2 max
  • P 0.040 max
  • S 0.030 max
View Complete Details

Stainless Steel 304 Welded Pipes

  • Outer Diameter 1/8″ NPS to 12″ NPS
  • Length Upto 30 meters, Custom Cut Lengths
  • Specifications ASTM A312 / ASTM SA312
  • Range 6NB to 1200NB
  • Wall Thickness 0.6 mm to 12.7 mm
  • Types Round, Square, Rectangle, Coil, “U” Shape, Hydraulic
  • SS 304
  • Ni 8 – 11
  • Fe Balance
  • Cr 18 – 20
  • C 0.08 max
  • Si 0.75 max
  • Mn 2 max
  • P 0.040 max
  • S 0.030 max
View Complete Details

Inconel 600 Pipes

  • Length Upto 30 meters, Custom Cut Lengths
  • Grade Alloy 600
  • Seamless Pipe Size 4 to 219mm W. T.: 0.5 to 20mm
  • Welded Pipe Size 5.0 mm – 1219.2 mm
  • Outer Diameter 1/8″ NPS to 12″ NPS
  • Wall Thickness 0.6 mm to 12.7 mm
  • Schedules 5, 10S, 10, 30, 40S, 40, 80, 80S, XS, 160, XXH
  • Specifications ASTM B167, B517 / ASTM SB167, B517
  • Types Round, Square, Rectangle, Coil, “U” Shape, Hydraulic
  • Alloy 600
  • Ni 72.0 min
  • Fe 6.0 – 10.0
  • Cr 14.0 – 17.0
  • C 0.15 max
  • Si 0.5 max
  • Mn 1.0 max
  • S 0.015 max
  • Cu 0.5 max
  • Density 8.47 g/cm3
  • Melting Point 1413 °C (2580 °F)
  • Tensile Strength Psi – 95, 000 , MPa – 655
  • Yield Strength (0.2%Offset) Psi – 45, 000 , MPa – 310
  • Elongation 40.00%
View Complete Details

Hastelloy C22 Pipes

  • Length Upto 30 meters, Custom Cut Lengths
  • Seamless Pipe Size 4 to 219mm, W. T. 0.5 to 20mm
  • Welded Pipe Size 5.0 mm – 1219.2 mm
  • Outer Diameter 1/8″ NPS to 12″ NPS
  • Wall Thickness 0.6 mm to 12.7 mm
  • Schedules 5, 10S, 10, 30, 40S, 40, 80, 80S, XS, 160, XXH
  • Specifications ASTM B622, B619 / ASTM SB622, B619
  • Types Round, Square, Rectangle, Coil, “U” Shape, Hydraulic
  • Element Hastelloy Alloy C22
  • C 0.010 max
  • Mn 0.50 max
  • Si 0.08 max
  • S 0.02 max
  • Co 2.50 max
  • Ni 50.015 min*
  • Cr 20.00 – 22.50
  • Fe 2.00 – 6.00
  • Mo 12.50 – 14.50
  • P 0.02 max
View Complete Details

Nickel 200 Pipes

  • Outer Diameter 1/8″ NPS to 12″ NPS
  • Length Upto 30 meters, Custom Cut Lengths
  • Seamless Pipe Size 4 to 219mm, W. T. 0.5 to 20mm
  • Welded Pipe Size 5.0 mm – 1219.2 mm
  • Wall Thickness 0.6 mm to 12.7 mm
  • Schedules 5, 10S, 10, 30, 40S, 40, 80, 80S, XS, 160, XXH
  • Specifications ASTM B161, B725 / ASTM SB161, B725
  • Types Round, Square, Rectangle, Coil, “U” Shape, Hydraulic
  • Element Alloy 200
  • C 0.15 max
  • Mn 0.35 max
  • Si 0.35 max
  • S 0.01 max
  • Cu 0.25 max
  • Fe 0.40 max
  • Ni 99.0 min
  • Density 8.9 g/cm3
  • Melting Point 1446 °C (2635 °F)
  • Tensile Strength Psi – 67000 , MPa – 462
  • Yield Strength (0.2%Offset) Psi – 21500 , MPa – 148
  • Elongation 45.00%
View Complete Details

Titanium Pipes

  • Outer Diameter 1/8″ NPS to 12″ NPS
  • Length Upto 30 meters, Custom Cut Lengths
  • Density 4.5 g/cm3
  • Tensile Strength Psi – 49900 , MPa – 344
  • Seamless Pipe Size 4 to 219mm, W. T. 0.5 to 20mm
  • Welded Pipe Size 5.0 mm – 1219.2 mm
  • Wall Thickness 0.6 mm to 12.7 mm
  • Schedules 5, 10S, 10, 30, 40S, 40, 80, 80S, XS, 160, XXH
  • Specifications ASTM B622, B619 / ASTM SB622, B619
  • Types Round, Square, Rectangle, Coil, “U” Shape, Hydraulic
  • Element Titanium Alloy Gr 2
  • Ti 99.2 min
  • C 0.1 max
  • Fe 0.3 max
  • H 0.015 max
  • N 0.03 max
  • O 0.25 max
  • Melting Point 1665 °C (3030 °F)
  • Yield Strength (0.2%Offset) Psi – 39900 , MPa – 275
  • Elongation 20.00%
Titanium Pipes
View Complete Details

Cupro Nickel Pipes

  • Outer Diameter 1/8″ NPS to 12″ NPS
  • Length Upto 30 meters, Custom Cut Lengths
  • Seamless Pipe Size 4 to 219mm, W. T. 0.5 to 20mm
  • Welded Pipe Size 5.0 mm – 1219.2 mm
  • Wall Thickness 0.6 mm to 12.7 mm
  • Schedules 5, 10S, 10, 30, 40S, 40, 80, 80S, XS, 160, XXH
  • Specifications ASTM B466, B467 / ASTM SB466, B467
  • Types Round, Square, Rectangle, Coil, “U” Shape, Hydraulic
  • Element Cu-Ni 70/30
  • Cu 65.0 min
  • Mn 1.0 max
  • Pb 0.5 max
  • Ni 29-33 max
  • Fe 0.4-1.0
  • Zn 1 max
  • Density 0.323 lb/in3 at 68 F
  • Melting Point 2260 F
  • Tensile Strength 50000 psi
  • Yield Strength (0.2%Offset) 90-1000 psi
  • Elongation 30.00%
View Complete Details

Monel 400 Pipes

  • Length Upto 30 meters, Custom Cut Lengths
  • Seamless Pipe Size 4 to 219mm, W. T. 0.5 to 20mm
  • Welded Pipe Size 5.0 mm – 1219.2 mm
  • Outer Diameter 1/8″ NPS to 12″ NPS
  • Wall Thickness 0.6 mm to 12.7 mm
  • Schedules 5, 10S, 10, 30, 40S, 40, 80, 80S, XS, 160, XXH
  • Specifications ASTM B161, B725 / ASTM SB161, B725
  • Types Round, Square, Rectangle, Coil, “U” Shape, Hydraulic
  • Element Monel Alloy 400
  • C 0.30 max
  • Mn 2.00 max
  • Si 0.50 max
  • S 0.024 max
  • Cu 28.00 – 34.00
  • Fe 2.50 max
  • Ni 63.00 min
  • Density 8.8 g/cm3
  • Melting Point 1350 °C (2460 °F)
  • Tensile Strength Psi – 80, 000 , MPa – 550
  • Yield Strength (0.2%Offset) Psi – 35, 000 , MPa – 240
  • Elongation 40.00%
View Complete Details

Stainless Steel 304 Seamless Tubes

  • Outer Diameter 3.00 mm – 219.10 mm
  • Length Upto 30 meters, Custom Cut Lengths
  • Tube Range 1/2″ OD – 12″ OD, Guage, 25 SWG – 10 SWG
  • Wall Thickness 0.40 mm – 12.70 mm
  • Schedules 5, 10S, 10, 30, 40S, 40, 80, 80S, XS, 160, XXH
  • Specifications ASTM A213, A269 / ASTM SA213, SA269
  • Types Round, Square, Rectangle, Coil, “U” Shape, Hydraulic
  • SS 304
  • Ni 8 – 11
  • Fe Balance
  • Cr 18 – 20
  • C 0.08 max
  • Si 0.75 max
  • Mn 2 max
  • P 0.040 max
  • S 0.030 max
View Complete Details

Stainless Steel 304 Welded Tubes

  • Outer Diameter 3.00 mm – 219.10 mm
  • Length Upto 30 meters, Custom Cut Lengths
  • Tube Range 1/2″ OD – 12″ OD, Guage, 25 SWG – 10 SWG
  • Wall Thickness 0.40 mm – 12.70 mm
  • Schedules 5, 10S, 10, 30, 40S, 40, 80, 80S, XS, 160, XXH
  • Specifications ASTM A269 / ASTM SA269
  • Types Round, Square, Rectangle, Coil, “U” Shape, Hydraulic
  • SS 304
  • Ni 8 – 11
  • Fe Balance
  • Cr 18 – 20
  • C 0.08 max
  • Si 0.75 max
  • Mn 2 max
  • P 0.040 max
  • S 0.030 max
View Complete Details

Stainless Steel 304 Heat Exchanger Tubes

  • Outer Diameter 9.52 mm O.D to 50.80 mm O.D
  • Thickness 0.70 mm to 12.70 mm
  • Length up to 12 Meters Leg Length & Customed Length
  • Range 10 mm OD to 50.8 mm OD
  • Specifications ASTM A249 / ASTM SA249
  • Finish Annealed, pickled & polished, BA
  • SS 304
  • Ni 8 – 11
  • Fe Balance
  • Cr 18 – 20
  • C 0.08 max
  • Si 0.75 max
  • Mn 2 max
  • P 0.040 max
  • S 0.030 max
View Complete Details

Stainless Steel 304 Instrumentation Tubes

  • Outer Diameter 6.00 mm to 60.00 mm
  • Thickness 0.6 mm THK to 6.00 mm
  • Length Instrumentation Tube Length – 1 Mtr Upto 32 Mtrs Long
  • Range 6.00 mm OD to 25.4 mm OD
  • Specifications ASTM A269, A213 / ASTM SA269, A213
  • Finish Annealed, pickled & polished, BA
  •  ss 304
  • Ni 8 – 11
  • Fe Balance
  • Cr 18 – 20
  • C 0.08 max
  • Si 0.75 max
  • Mn 2 max
  • P 0.040 max
  • S 0.030 max
View Complete Details

Stainless Steel 304 Condenser Tubes

  • Outer Diameter From 6mm~2500mm
  • Thickness 0.7 mm Thick To12.7 mm Thick
  • Range 6 mm OD to 219.1 mm OD
  • Length 1 Mtr Upto 32 Mtrs Long / U-Tube Length – 32 Mtrs
  • Specifications ASTM A249 / ASTM SA249
  • Finish Annealed, pickled & polished, BA
  • SS 304
  • Ni 8 – 11
  • Fe Balance
  • Cr 18 – 20
  • C 0.08 max
  • Si 0.75 max
  • Mn 2 max
  • P 0.040 max
  • S 0.030 max
View Complete Details

Stainless Steel 304 Corrugated Tubes

  • Thickness 0.50 mm TO 6.0 mm
  • Length As per Customer requirement, Maximum upto 22 Meter Long.
  • Range DN6 till DN600
  • Specifications ASTM A213 / ASTM SA213
  • Hose Type annular corrugated
  • SS 304
  • Ni 8 – 11
  • Fe Balance
  • Cr 18 – 20
  • C 0.08 max
  • Si 0.75 max
  • Mn 2 max
  • P 0.040 max
  • S 0.030 max
View Complete Details

Stainless Steel Seamless U Tubes

  • Outer Diameter 9.52 mm O.D to 50.80 mm O.D
  • Length up to 12 Meters Leg Length & Customed Length
  • Size 1/2inch TO 24inch
  • Wall Thickness 0.70 mm to 12.70 mm
  • Schedules SCH10S, SCH40S, SCH80S, SCH160S
  • Specifications ASTM A213, A688 / ASTM SA213, SA688
  • Finish Annealed, pickled & polished, BA
  • SS 304
  • Ni 8 – 11
  • Fe Balance
  • Cr 18 – 20
  • C 0.08 max
  • Si 0.75 max
  • Mn 2 max
  • P 0.040 max
  • S 0.030 max
View Complete Details

Stainless Steel Welded U Tubes

  • Outer Diameter 9.52 mm O.D to 50.80 mm O.D
  • Length up to 12 Meters Leg Length & Customed Required Length
  • Finishing Annealed, pickled & polished, BA
  • Size 6.35 Mm OD to 273 Mm OD
  • Wall Thickness 0.70 mm to 12.70 mm
  • Schedules SCH10S, SCH40S, SCH80S, SCH160S
  • Specifications ASTM A269, A688 / ASTM SA269, SA688
  • SS 304
  • Ni 8 – 11
  • Fe Balance
  • Cr 18 – 20
  • C 0.08 max
  • Si 0.75 max
  • Mn 2 max
  • P 0.040 max
  • S 0.030 max
View Complete Details

Stainless Steel 304 Boiler Tubes

  • Length 5.8m, 6m random length or acording to customer’s requests
  • Range 6.35 mm OD upto 152.4 mm
  • Outside Diameter 6mm~2500mm
  • Specifications ASTM A249, A269, A213, A554, A270
  • SS 304
  • Ni 8 – 11
  • Fe Balance
  • Cr 18 – 20
  • C 0.08 max
  • Si 0.75 max
  • Mn 2 max
  • P 0.040 max
  • S 0.030 max
View Complete Details

SS 317 Coil Tubing

  • Outer Diameter 1/16INCH through 3/4INCH
  • Thickness 010INCH through .083INCH
  • Seamless ASTM A213 and ASTM A269
  • Welded ASTM A249 and ASTM A269
  •  SS 317
  • Ni 11 – 14 
  • Cr 18 – 20
  • C 0.08 max
  • Si 1 max
  • Mn 2 max
  • P 0.045 max
  • S 0.030 max
  • Mo 3.00 – 4.00
View Complete Details

Inconel 600 Tubes

  • Density 8.47 g/cm3
  • Seamless Tube Size 4 to 219mm,   W. T.-0.5 to 20mm
  • Welded Tube Size 5.0 mm – 1219.2 mm
  • Outer Diameter 1/8″ NPS to 12″ NPS
  • Wall Thickness 0.6 mm to 12.7 mm
  • Schedules 5, 10S, 10, 30, 40S, 40, 80, 80S, XS, 160, XXH
  • Length Upto 30 meters, Custom Cut Lengths
  • Specifications ASTM B163, B516 / ASTM SB163, B516
  • Types Round, Square, Rectangle, Coil, “U” Shape, Hydraulic
  • Grade Alloy 600
  • Ni 72.0 min
  • Fe 6.0 – 10.0
  • Cr 14.0 – 17.0
  • C 0.15 max
  • Si 0.5 max
  • Mn 1.0 max
  • S 0.015 max
  • Cu 0.5 max
  • Melting Point 1413 °C (2580 °F)
  • Tensile Strength Psi – 95, 000 , MPa – 655
  • Yield Strength (0.2%Offset) Psi – 45, 000 , MPa – 310
  • Elongation 40.00%
View Complete Details

Hastelloy C22 Tubes

  • Length Upto 30 meters, Custom Cut Lengths
  • Seamless Tube Size 4 to 219mm W. T.: 0.5 to 20mm
  • Welded Tube Size 5.0 mm – 1219.2 mm
  • Outer Diameter 1/8″ NPS to 12″ NPS
  • Wall Thickness 0.6 mm to 12.7 mm
  • Schedules 5, 10S, 10, 30, 40S, 40, 80, 80S, XS, 160, XXH
  • Specifications ASTM B622, B626 / ASTM SB622, B626
  • Types Round, Square, Rectangle, Coil, “U” Shape, Hydraulic
  • Element Hastelloy Alloy C22
  • C 0.010 max
  • Mn 0.50 max
  • Si 0.08 max
  • S 0.02 max
  • Co 2.50 max
  • Ni 50.015 min*
  • Cr 20.00 – 22.50
  • Fe 2.00 – 6.00
  • Mo 12.50 – 14.50
  • P 0.02 max
  • Density 8.69 g/cm3
  • Melting Point 1399 °C (2550 °F)
  • Tensile Strength Psi – 1, 00, 000 , MPa – 690
  • Yield Strength (0.2%Offset) Psi – 45000 , MPa – 310
  • Elongation 45.00%
View Complete Details

Nickel 200 Tubes

  • Wall Thickness 0.6 mm to 12.7 mm
  • Length Upto 30 meters, Custom Cut Lengths
  • Seamless Tube Size 4 to 219mm W. T.: 0.5 to 20mm
  • Welded Tube Size 5.0 mm – 1219.2 mm
  • Outer Diameter 1/8″ NPS to 12″ NPS
  • Schedules 5, 10S, 10, 30, 40S, 40, 80, 80S, XS, 160, XXH
  • Specifications ASTM B161, B725 / ASTM SB161, B725
  • Types Round, Square, Rectangle, Coil, “U” Shape, Hydraulic
  • Element Alloy 200
  • C 0.15 max
  • Mn 0.35 max
  • Si 0.35 max
  • S 0.01 max
  • Cu 0.25 max
  • Fe 0.40 max
  • Ni 99.0 min
  • Density 8.9 g/cm3
  • Melting Point 1446 °C (2635 °F)
  • Tensile Strength Psi – 67000 , MPa – 462
  • Yield Strength (0.2%Offset) Psi – 21500 , MPa – 148
  • Elongation 45.00%
View Complete Details

Titanium Tubes

  • Length Upto 30 meters, Custom Cut Lengths
  • Size 1mm OD upto 254mm OD in
  • Outer Diameter 1.250″ – 6.000″ (30-150mm)
  • Wall Thickness 0.095″ – 1.000″ (.2.5-25mm)
  • Schedules 5, 10S, 10, 30, 40S, 40, 80, 80S, XS, 160, XXH
  • Specifications ASTM B338 / ASTM SB338
  • Types Round, Square, Rectangle, Coil, “U” Shape, Hydraulic
  • Ti 90 min
  • Fe 0.25 max
  • O 0.2 max
  • Ai 6 min
  • V 4 min
  • Density 4.43 g/cm3
  • Melting Point 1632 °C (2970 °F)
  • Tensile Strength Psi – 138000 , MPa – 950
  • Yield Strength (0.2%Offset) Psi – 128000 , MPa – 880
  • Elongation 14.00%
  • Element Titanium Alloy Gr 5
View Complete Details

Stainless Steel Double Ferrule Fittings

  • Size 1/16”OD to 2”OD, 2mm OD to 50mm OD
  • Specifications ASTM A276 ASME SA 276
  • Thread NPT, BSP, BSPT, UNF, ISO, SAE etc
View Complete Details

Stainless Steel Manifolds

  • Size 1/4 to 1 inch., 6 to 25 mm
  • Temperature 20 to 650°F (-28 to 343°C)
  • Number Of Flower T’ Type & ‘H’ Type
  • Range 2 Way, 3 Way, 5 Way
  • Working Pressure Up to 6000 psig (413 bar)
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us