Other Products / Services #6975342

Z Premium Cardium Compund are a range of high viscosity, adhesive type black petroleum products fortified with special tackiness agent which reduces oil consumption.These are recommended principally for open gears and cane bearings in the sugar industry which require an adhesive, high. It is extensively used in wire ropes and railways

Z Premium Starter Oil which reduces friction and provides a cooling effect to the engine. Our starter oil is widely used in various two and four wheeler vehicles owing to its low viscosity and high density features. It can be availed from us at highly competitive prices.

Z Premium Multipurpose Oil, We offer high quality general purpose / general purpose oils to our clients, that are meant for for non-critical all loss lubrication systems, as well as for the handling oil applications involving lubrication of bearing, Gears etc. these are available in various grades as per their functions i.e 15, 22, 32, 46, 68, 100 150, 220, 320, 460.Properties:- Provides exceptional wear protection- Provides protection against sludge

Z Premium Moulding Oil is an essential component of any concrete pour; allowing not only seamless removal of formwork, but also preventing concrete contamination. It is a high quality mould release agent. It is stain resistant, meaning it can be also used for coloured, white or standard OPC

z premium refrigeration compressor oil 68 - 10 litre, there oils are blended from specially refined paraffinic base oils which have exceptional thermal and oxidation stability. the grade is formulated from specially selected deep hydro finished lube base stocks to provide low pour point, dryness, good chemical stability. it is recommended for wide range of refrigeration compressors, both reciprocating as well as rotary, using ammonia and carbon dioxide.

Z Premium Engine Oil 5w40, Good viscosity index; Good detergency level and excellent oxidation stability provides proper viscosity through a wide range of engine temperature. The 5w40 is crude-based motor oil that is best fit for diesel and gasoline engines. This motor oil is usually used for cars that are under warranty. Here are some important features of this category of oil: Suitable for vehicles that use unleaded and leaded gasoline.

Z Premium Grease Ap-3 grease is a premium quality all purpose automotive grease. Recommended for all types of Wheel bearings used in automobiles e.g Heavy duty, Light commercial, Passenger vehicles.

z premium brake oil dot 4 is is an extra high performance hydraulic brake fluid for use in automotive disc, drum and anti-skid brake systems and clutch systems.

Z Premium Hydraulic Oil 68-20, Premium quality, shear stable, multi-viscosity, anti-wear hydraulic fluid, designed for use in hydraulic systems subjected to wide variations in ambient and operating temperatures. They provide long service life and are recommended for hydraulic and circulation systems of a wide variety of equipment. These oils are also used for compressor crankcase lubrication, but are not recommended for lubrication of turbines and equipment having silver-coated components.

z premium petroleum jelly it can be used in a variety of applications from metal protection and lubrication of machinery used in food preparation to pharmaceutical applications as a component of ointments and barrier creams (most common commercial product being vaseline). it is also used in many types of polishes and in lubricating greases, rust preventives, and modeling clay.

Z Premium Hydraulic Oil 68 -They provide long service life and are recommended for hydraulic and circulation systems of a wide variety of equipment. These oils are also used for compressor crankcase lubrication, but are not recommended for lubrication of turbines and equipment having silver-coated components.

Z Premium Gear oil 460, Typical applications include lubrication of calenders, piston compressors, bevel, spiral bevel, helical, spur and worm gear units. The lubricants are free of Chlorine, sulphur and metal based additives including lead. They remain homogeneous from below their pour point to temperatures in excess of 250C.

z premium brake oil -dot 3 blended with a balanced combination of anti-oxidant, metal deactivator and corrosion inhibitor to impart superior component protection long service-life.

Features :After washing and drying bumper and dashboard it is applied with soft cloth by dipping in it. It dries up quickly leaving the bumper and dashboard SHINE and PERFUMED.

Z Premium Hydraulic oil 32 formulated from high viscosity index solvent refined mineral base oils with additives to provide excellent protection against oxidation, corrosion, wear and foaming.

Z Premium Gear Oil 80W90 is designed for use in differentials, both hypoid and limited slip, manual gearboxes, transfer cases and transaxles in passenger cars, light commercials, 4WDs, trucks, construction, earthmoving and agricultural equipment, where this viscosity grade is required.

Z Premium Cutting Oil, are used to reduce friction, through lubrication, which is a tribological phenomenon characteristic of machining processes, and occurs at the contact between workpiece and tool. Also, cutting works to remove the heat generated from the cutting zone through cooling

Z Premium Thermic Fluid, Keeping the diverse requirements of customers in mind, we are instrumental in providing Thermic Fluid Oil. Ability to provide superior performance in indirect closed fluid heat transfer system up to bulk operating temperature up to 320C.Increased life, reduced oxidation and thermal degradation.Minimal fouling and deposit formation on heat transfer surface.

Z Premium Thermic Fluid 500, recommended in service involving a maximum bulk oil temperature of 290C. In addition, it has the following benefits. This grade is derived from the finest quality petroleum base stocks and is fortified with high performance additives to enhance performance at higher temperatures.

Z Premium Thermic Fulid 600, This grade is derived from the finest quality petroleum base stocks and is fortified with high performance additives to enhance performance at higher temperatures. Ability to provide superior performance in indirect closed fluid heat transfer system up to bulk operating temperature up to 320C. Increased life, reduced oxidation and thermal degradation Minimal fouling and deposit formation on heat transfer surface. Hence sustained heat transfer characteristics.

Z Premium Compressor Oil is premium mineral compressor oil specially developed for oil flooded screw and sliding vane type air compressor to provide satisfactory lubrication under wide range of operating temperatures and load conditions.Compressor oil is a necessary component in any air conditioning system that uses compressor in its compression system. There are three main purposes of the oil. They are used for lubrication, removal of heat and for sealing.

Z Premium Engine Oil, Ultra premium synthetic engine oil for new generation petrol diesel engine.Better Lubrication. Engines are exposed to different temperatures that result in gradual wear and tear. .Cleaner Engine. Cleaning is an important role that an engine oil plays for your engine. .Effective Cooling. .Protects it from Corrosion. .Act as a Seal.

z premium 4t plus 20w40 engine oil has following features - suitable for all types of 4 stroke bikes upto 150 cc.excellent operation at high temperature conditions.high detergent and dispersant properties keep the engine, gear and wet clutch clean.reinforced anti-wear ability extends engine life.specifications: api sm, hc- tech, jaso ma2 4- stroke motorcycle oil.

Z Premium Engine Oil 5W30, Uniquely designed molecules of engine oil keeps engine running like new even in demanding arduous operating conditions. 5w30 oil is one of the most commonly used motor oils because it is suitable for a wide variety of vehicles and engine types. 5w30's viscosity range means it can lubricate, seal, and protect an engine's internal components in a range of climate conditions.

Z Premium Engine Oil 5W30, Very high oxidative stability system. Superior wet clutch performance. Enhanced longer transmission life. 5w30 oil is one of the most commonly used motor oils because it is suitable for a wide variety of vehicles and engine types. 5w30's viscosity range means it can lubricate, seal, and protect an engine's internal components in a range of climate conditions.

Z Premium 15W40 Engine Oil is a multigrade oil i.e the oil can work efficiently in both winter and summer season. It has the viscosity of 15W when cold and the viscosity of SAE 40 when hot. This means that one type of oil works in all temperatures.

Z Premium Engine Oil, Engine oils are formulated with high viscosity index solvent refined virgin Base Oil stock and world class standard Additives for high-performance engine of Car, Motor Cycle, Truck, Tempo and DG sets.

Z Premium Wheel Bearing Grease is good grease, which guarantees that the bearings remain undamaged and protects the metal from water and heat. It also extends the life of the bearings.

Z Premium Multipurpose Greaseb particularly suitable for lubrication of equipment such as: Ball bearings, needle bearings. Plain bearings. Axles and articulations.

Z Premium Motor Oil is used for lubrication of internal combustion engines. The main function of motor oil is to reduce friction and wear on moving parts and to clean the engine from sludge (one of the functions of dispersants) and varnish (detergents)

Z Premium Steering Oil helps lubricate the power steering pump and the steering components. This steering fluid even prevents corrosion

Z Premium Brake Oil is a type of hydraulic fluid used in hydraulic brake and hydraulic clutch applications in vehicles. It is responsible for transferring force into pressure, and to amplify braking force.

Z Premium Spindle Oils are anti-wear oil that is formulated for use in the lubrication of high-speed spindle bearings in precision grinders and other machine tools that require the use of low viscosity oils. It can be applied by misting, drop feed, force-feed and wick feed, hand oiling or by the use of circulation systems.

Z Premium Heat Transfer Oil 400 is a liquid that takes part in heat transfer by serving as an intermediary in cooling on one side of a process, transporting and storing thermal energy, and heating on another side of a process.

Z Premium Heat Transfer Oil 500 -highly refined and stable paraffinic oil designed to be used as a heat transfer medium and quenching oil. In many industrial applications heating is provided indirectly by circulating hot oil through a heat exchanger, thus reducing hot spots and increasing the safety of the heating process.

Z Premium Heat Transfer Oil 600 are high performance products intended for use in closed indirect heating installations. They are recommended for use in cold-oil sealed, indirect heating and cooling systems in all kinds of industrial processes.

Z Premium Refrigeration Compressor Oil 68 - 20 Litre, The grade is formulated from specially selected deep hydro finished lube base stocks to provide low pour point, dryness, good chemical stability. It is recommended for wide range of refrigeration compressors, both reciprocating as well as rotary, using ammonia and carbon dioxide.

we are engaged in offering tempering oil that is processed using refined base oils so as to avoid the usage of additives. It is extensively used for normal quenching operations on a wide variety of steel parts like nuts and bolts, ball bearings and certain types of brake systems.

Z Premium Tractor Oil / fluids provide efficient braking, seal compatibility, oxidation stability, thermal resistance, protection against dust and corrosion, and antifoam characteristics. Also, smoother operation and long life span of tractors can be achieved using these fluids

Features : White oil is an absolutely colorless, water white odorless and tasteless, viscous liquid. After distillation of hydro carbon. Sulphonation of the heavy fraction is done. There are three grades of white oil.

Z Premium Gear Oil 90 - Good Extreme Pressure and Antiwear properties protect against wear and scoring.High oxidation stability minimises sludge and deposit formation facilitating longer gear and bearing life.Effective rust and corrosion protection reduces wear and extends component life.