Ludhiana, Punjab, India
Our Products
MANUFACTURED FROM M.S. FORGING
QUALITY STEEL, B.C.P/ BLACK FINISH
| Single Speed for Chain 1/2x1/8, 1/2x3/32. |
| Sizes Available : |
| A-28x3.1/2" or 5" B-32x4" or 5" |
| C-36x4" or 5" D-40x5" or 6" |
| E-44x6"or6.1/2"or7" F-46x6 or 6.1/2"or 7" |
| G-48x6.1/2" or 6.3/4" or 7" |
| H-52x6.1/2" or 6.3/4" or 7" |
| With or without holes for chain Guard to specify Finish C.P. or black with or without plastic/steel guard as to order. |
All sizes available in C.P., Black and Plastified finished suitable for all sizes of chainwheels.
| All sizes available in C.P., Black and Plastified finish (glossy/mat) |
| A- Altus type sizes available are 125mm, 150mm, 170mm |
| B- BMR type sizes available are 100mm, 125mm, 170mm |
| Available in 8.5, 9, 9.5mm with hex nut & washer |
| FInish : Z/P |
MADE OF PRESSED STEEL, CARBON
CHROME STEEL BALLS FOR SMOOTH
ROTATION COMPLETE WITH HUB
AXLES, NUTS, CONES, WASHERS,
CHECK NUTS IN BRITISH/ FRENCH
THREADINGS FOR FREEWHEEL
B.C.P. FINISH.
| Open ends thick barrel |
| Front axle3/8x 5.1/2 |
| Rear Axle3/8x 6.1/2"or 7" or 7.1/2" |
| Holes 20x20, 28x28, 36x36, 32x40 |
| Hole gauge 10, 12, 14. |
MANUFACTURED COMPLETE WITH
HARDENED CONES, NUTS, CHECKNUT
AND WASHERS. AVAILABLE IN FINISH
BNP/ZP/BLACK IN PCS/PAIRS/DOZENS
MADE OF SPECIALY SELECTED MATERIALS
PRECISELY MACHINED TO CORRECT
SIZES, CASE HARDENED & GROUND
B.C.P. /ZP/BLK. FINISH.
For OPC Swedish type S/O 10
Ball retainer Size 1/4x11
Thread : L-24 TPI/R-32 TPI With two cone.
1. Ball Retainer 5/32x16 Ball, 14 Ball for fork fitting.
2. Ball Retainer 1/4x7" for Hub Rear.
3. Ball retainer 3/16x7" for Front Hub
| ROLLER CHAIN |
| 1/2" x 3/32 x 116 links |
| 1/2" x 1/8" x 114 links BNP/Black |
| Made of crca strips |
MANUFACTURED FROM LIGHT
QUALITY 16G ERW 22.20MM
STEEL WITH BLACK/ GREY
PLASTIC OR PVC GRIP
Raised pattern with double levers complete and expander bolt for centre pull brakes, black grips. Stem size 7.1/2".
Black/brown hard top with rear twisted coil springs tripple base wires available in PVC or Assembled base only.
A-Made of ERW tubes in straight pattern
B-With Knarling
Sizes available 5"-24" Sizes 25.4 x 22.2
| SEAT CLIP BMX |
| Complete with axle nuts & plates Z/P |
| D-Seatclip 90x3 |
| E-Seat axles |
| F-Seat clam for MTB complete W/Nut & Bolt. |
| Fork Fittings |
| Ph Type, S/O 7 Pcs |
| Steel ball Size : 1/8" or 5/32" |
| Thread : 24TPI |
| For caliper and cantilever brakes, available in cylinder & peer head. |
| A-Lever for cantilever full Molded |
| B-Lever for cantilever with steel bracket |
| C-Lever for V Brake |
| D-BMX Sheet Type Half Ball |
| E-BMX Sheet Type full Ball |
| F-Lever for French type |
| G-Solid lever. |
COMPLETE WITH RUBBER
SHOES NUTS & WASHERS
Open end Philip Type Rubber 55mm, Also Available in close end.
MADE OF CRCA STRIPS WITH BOLTED
CHANNEL/ROUND STAYS AVAILABLE IN
C.P. /BLACK, ENAMELLED OR IN
RED/BLUE/GREEN FLAMBOYANT
COLOURS AS TO ORDER
| MUDGUARD RALEIGH TYPE |
| With flag type stay and clip For roadsters, deep round profile single stay fastened. |
| Wheel Sizes : 28" B.C.P./Black/Coloured |
| Dunlop Valve For Jointed Tube (Set of 7 Pcs) |
| A. Dust CapB.Top NutC. Plug with Rubber valve tubingD. Rim NutE. Hexa NutF. Bridge PlateG. Stem |
Chain stay for Philip Type ERW steel tubes 18Gx22.2 Bridge Welded & fabricated to sizes with or without paint 16" to 28"
| B.B. SHELL |
| Philip Type For round chain stay 67mm Length 10/12G Raw finish threading 24 TPI RH. LH W/Without Bush Full/Half Bush, as per order. |
MADE OF STEEL IN ROUND OR
CHANNEL SECTION COMPLETE
WITH OR WITHOUT REFLECTOR
A-Single F/W openerB-Pedal SpannerC-Fork fitting SpannerD-Rim StreightnerE-Multi F/W Opener Spline typeF-Multi F/W Opener (Old Model)
Made of steel1/2way grooves 38mm dia, in C/P finish
NK-1 Nipple key 6 grooves one way 10-12-14/14-15/15 G
NK-2 Nipple key 8 grooves one way 9-10-11-12-13-14/14-15 G
NK-3 Nipple key 8 grooves 2 ways 10/10-12/12-14/14-15/15 G
