My ExportersIndia

For Buyer

For Seller

For Help

Our Products

  1. Milling Machines 3 Products available
  2. Kitchenware And Cookware 3 Products available
  3. Casting, Forging & Moulding Machines

    2 Products available
  4. Construction Machinery & Equipment

    2 Products available
  5. Molding Machines

    2 Products available
  6. Material Handling Machines & Systems

    2 Products available
  7. Furnace Parts

    2 Products available
  8. Tables

    1 Products available
  9. Dust Collectors

    1 Products available
  10. Industrial Mixers & Homogenizers

    1 Products available
  11. Others Products 11 Products available

Our Products

We offer the best product range of Thermal Reclamation System, Mould Manipulator, Sand Mechanical Attrition, ROLLOVER DRAW Machine and Dust Collection.

KNOCKOUT M/C

  • Ranges from 1000 Kgs. to 10000 Kgs
JKFE Heavy duty Knockout Machine are of sturdy construction and easy to maintain. Knockout Grid vibrates at great efficiency which is constant over the entire area and it will give the maximum vibration. The springs are designed in such a way that it will transit very less vibratory effect to the base frame. The Base frames are specially designed to withstand heavy shocks and overloads provided with proper spring rests. The Entire system is driven by eccentric shaft supported by heavy duty anti-friction bearings or Electric vibrating motors. Counter Weights can be adjusted to get the required vibration.
View Complete Details

Ladle Pre Heater

We are offering ladle pre heater jkfe manufactures ladle pre heater, is most effective and utilize maximum heat generated by burner. Machine can be provided in vertical as well as horizontal design. Machine for size up to 70 ton ladle can be supplied. cost- effective and rigid designless fuel consumptionmaximum utilization of heat generated by burner.
View Complete Details

Ladle Preheater

  • size up to 70 Ton
JKFE manufactures Ladle Pre Heater, is most effective and utilize maximum heat generated by burner. Machine can be provided in Vertical as well as horizontal design. Machine for size up to 70 Ton Ladle can be supplied.
View Complete Details

Sand Moulding Line Machine

  • Number Of Flower High Efficiency
  • Locking Cylinde 600mm Stoke
View Complete Details

Compaction Table

Jkfc mould compaction table for mechanical ramming of chemical bonded as well as silicate bonded sand mould through vibration technology. By vibrating the pattern and box as it is filled with mix sand, the sand flows freely into all recesses and cavities with little or no manual ramming and makes a stronger compacted mould. This results in better casting finish and fewer defects. The table utilizes a set of roller on top which allow easy movement of the pattern box onto and off of the table. During vibration the table with pattern box lift up and isolated roller top by air rubber below. Vibration intensity and duration are controllable depending upon control options specified. Standard models as below:
View Complete Details

Spherical Bowl Mixer

Super Mixer (Spherical Bowl Mixer) is unlike conventional mixer-Muller for No-bake and silicate sand mixing. This Mixer consists mainly of a newly developed mixer Bowl. The mixer has a spherical construction with specially designed high-speed two action blades, which gives three-dimensional movement for thorough mixing of sand with silicate, organic binder or catalyst in any combination in just 15 to 18 sec. Models available for chemically bonded sandsilicate sand and dual capability.
View Complete Details

Thermal Reclamation System

  • Capacity range 1 TPH to 10 TPH
Stronger molds and cores with as new sand. After switching to thermal reclamation, one foundry cut new sand cost to 70 percent.Better surface finish and less porosity. Reducing chemical additives reduces the gas that is generated.More dimensionally accurate castings. Thermal reclamation creates expanded silica sand grains which do not go through the same expansion as new sand during every pour. In steel foundries this can limit or eliminate the need for iron oxides, zircon and chromite sands.Far less odor and smoke in the foundry during pouring because less chemical binder is needed.Less grinding and welding of castings is required. With fewer chemical additives and a superior quality of sand grain, casting defects such as finning and burn in are reduced
View Complete Details

Dust Collector

We offer pulse jet dust collectors which is ideally suited for dust extractionform returning sand. this pulse jet dust collector is engineered to a specific pressure or vacuum.these are used as dust collector for the purpose of removing dead sandand dust from returning sand at the time of cooling in cooler classifier.dust collectors contains number of bags covered on metallic cage thebags are made of pp polyester, aramid etc.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us