JOGI SafeTech Pvt. Ltd.

Adajan, Surat, Gujarat

The Goal of Health and Safety Environment (HSE) is to protect employees, the public, the environment and to comply with applicable laws and protect the Company’s reputation. JOGI SafeTech will provide all leading HSEtraining for various training programs. The Goal of Health and Safety Environment (HSE) is to protect employees, the public, the environment and to comply with applicable laws and protect the Company’s reputation. JOGI SafeTech will provide all leading HSE training for various training programs.

We conduct fire safety audits for various industries, high rise buildings, etc. As per national building code of india, 2005 and other relevant safety standards to identify all hazards for taking corrective & preventive actions. We also help you in preparing the emergency plans for fire safety and conduct mock drills. Fire safety audit is an integral & an essential part of the loss prevention strategy. The objectives of the fire safety audit are to look after the safety, health & the welfare of employees in the industry, to maintain the high standards of safe operation and to objectives of fire audit: assess good management practices; identify the available material (fuels) for fire. Identify the sources of ignition evaluate the possibility of occurrence of fire assess the : * adequacy and efficacy of existing fire safety management systems * means of escape * staff training * fire warning systems * means of fighting fire

We provide hazop study services to a wide range of industries including oil and gas, petrochemical, chemical, fertilizer, pharmaceutical, pesticides, etc. We also provide hazop chairman for hazop study of process p & ids at the design stage. Hazops concentrate on identifying both hazards as well as operability problems. Although hazard identification is the main focus, operability problems should be identified to the extent that they have the potential to lead to process hazards, result in an environmental violation or have a negative impact on profitability.

Fire Load Calculation is an important factor in establishing the basis for the assessment of the fire risk pertaining to any building. It indicates the quantity of heat liberated per unit area when a building and its contents are completely burnt.We conduct Fire Load Calculation as per NFPA 557 as well as GFR 66A. The calculation of the fire load is the basis for the determining the classification of the occupancies for the fire grading of buildings as well as determining the required resources for fire fighting.

HAZID (Hazard Identification) is a qualitative technique used for hazard identification in the early project stage considering the existing site infrastructure, weather, and geotechnical data. The focus is on early identification of potential hazards and threats affecting people, the environment, assets, or reputation. The key benefit of a HAZID study is to provide essential inputs to project development decisions. Major findings and hazard ratings help to prioritize the actions. Purpose Identify and systematically assess all major hazards and potential incident events associated with the identified construction activities, with a focus on HSE and equipment hazards; Evaluate the identified risks that have the potential to affect personnel, assets, production or the environment; Where necessary, make recommendations to eliminate or reduce risks; Assess Major Accident Events (MAEs); Record the workshop findings;

Material handling is the lifting, carrying or movement, protection, storage, and control of materials, products, or things throughout manufacturing, warehousing, distribution, and disposal work activities. As a process, material handling incorporates a wide range of manual, semi-automated, and automated equipment and systems. Manual material handling is the lifting, carrying, or moving of materials, articles or things by Man. Mechanical materials handling is the movement of materials, articles, or things by such means as lift trucks, conveyors, or cranes and hoists. In order to overcome the higher risk outcomes of manual material handling i.e. from musculoskeletal disorders & to have a safe movement of materials with the help of lifting devices, we provide the following training: These includes: EOT Operator Training Hydra Operator Training Forklift operation Training Rigging operation Training Overhead cranes Ergonomics Study & training Protective guarding

The first step to developing an effective PSM program is to conduct a Gap Analysis Audit. Gap Analysis provides the basis to the management to identify the areas that need to be focused on to ensure process safety. JOGI provides a cost-effective 1-2 day review of your site operations, policies, and procedures to help you identify the weakness and major issues in the implementation of PSM programs. Objectives Comply with applicable portions of the PSM program regulations. Identify deficiencies in program documentation or implementation. Suggest methods or improvements that might be implemented to assist the facility with addressing documentation requirements and appropriate implementation.

Training is an important part of the PSM implementation program. Before the PSM program is implemented, it is vital to impart its training to the concerned team members. The typical contents of our PSM Training program are: What is PSM What are the elements of PSM What is the role of an individual element in the management of overall process safety How various elements of PSM are interlinked How to implement elements of PSM How to make a team for implementation of the PSM program Documentation for PSM Need of assessment and improvement

Elements of PSM program vary site to site and industry to industry. The most vital element for one industry may not make any sense in another industry. The relevance and importance of various PSM elements depend upon the type of process, type of unit operations involved, type of industry, size of the industry, and a number of employees. JOGI, therefore, designs a customized PSM program considering the only relevant and sufficient elements of PSM which encompasses all the aspects of process safety for that unit. Apart from the implementation of complete PSM program, we also provide support for implementation of one or more elements of PSM. Employee Participation Process Safety Information Process Hazard Analysis Operating Procedures Training Contractors Pre-Startup Safety Review Mechanical Integrity/ Maintenance Hot Work Management of Change Incident Investigation Emergency Planning And Response Auditing

Illumination Survey is conducted to identify too much bright light, glare, low light or flickering light to avoid potential hazards and evaluation of risk to improve employee safety. The the purpose is to reduce the eye-related problems and providing better illumination at the workplace thereby increasing the efficiency of the employees during the work activities. It evaluates the efficiency of the existing lighting fixtures installed in the workplace and compares it with the existing standards. Lux meter is used for measuring Illumination levels. Lux is monitored at different locations with the help of lux meter and the result is compared with standards and providing appropriate recommendations for the areas where low lux is observed.

Monitoring Analysis/Evaluation of various Physical, Chemical, Aerosols & Microbiological Pollutants/Hazards like Temperature, Relative Humidity, CO2, CO, O2, TVOCs, Particulates, etc. are carried out as per the requirement. Evaluation of the local exhaust ventilation systems, Heating Ventilation and Air Conditioning (HVAC)/Air Handling Unit (AHU) system. Evaluation of fume hoods. Calculating Air Changes per Hour in offices with mechanical and natural ventilation.

The study is meant to eliminate discomfort and risk of injury/ill health due to working style. The GOAL of an ergonomic assessment is to determine the level of ergonomic risk for the job you are evaluating. In the ergonomics field, task analysis is a method to describe and analyze task performance when users interact with complex systems. This is the first step to do an ergonomic evaluation. We use the following Ergonomic Risk Assessment Tools : Lifting/lowering: WISHA/NIOSH lifting calculator Pushing, pulling, and carrying: Snook tables Upper body posture: Rapid Upper Limb Assessment (RULA) Entire body posture: Rapid Entire Body Assessment (REBA) For vibration: Hand-Arm Vibration calculation

Crane Operator Training is designed for crane operators and the concerned supervisory personnel responsible for the daily operation and safe performance of cranes. Our training gives participants the working knowledge to assist in reducing operator errors that may lead to unnecessary downtime, safe operation of EOT, daily safety checklist, etc. thereby reducing the unsafe conditions.

The purpose of the Hydra Crane Operator Training Program is to define the work practices and the inspection procedures to help ensure that the operators of the Hydra & nearby personnel are protected from potential hazards associated with the movement of equipment and material. Our training ensures workers have the training and knowledge required to safely operate cranes specific to your workplace. Programs include a comprehensive in-class session followed by individual operator testing on-site at your facility. Programs incorporate the use of custom-designed models and visual aids which help to enhance interest and facilitate a higher comprehension level for participants.

We aim at describing the hazards of forklift truck operations and the control methods necessary to reduce and prevent near miss, incidents and accidents. Operating a forklift takes Skill, Mechanical Knowledge, and Knowledge of Workplace hazards and we help to achieve the same through our training program. Training Objectives: At the end of our training, participants will be able to: Describe the causes of typical accidents involving forklift Describe the basic safety rules to be followed when using forklift trucks Help protect thee employees, equipment materials Describe the requirements for forklift truck maintenance inspection

Fire Adequacy survey is an assessment of the building against all legislative as well as functional requirements and its level of compliance with all the systems and resources. A fire adequacy survey helps to ensure that buildings are fitted with correct fire safety installations required by the fire safety standard and that these fire safety installations are maintained in an operational condition. The survey includes a check… Availability and adequacy of fire safety systems and installations Operational test of fire safety installations. Records of maintenance of fire safety installations Evacuation instructions were given to employees and residents Structural aspects of the building After a fire safety survey, a report is prepared and issued to the building owner/occupier confirming the findings of the survey. The final report contains the level of compliance and deficiencies. Where a deficiency is noted, we give specific recommendations to correct the same.

We conduct Fire Safety Audits for Various Industries, High Rise Buildings etc. as per National Building Code of India, 2005 and other relevant safety standards to identify all hazards for taking corrective & preventive actions. We also help you in preparing the emergency plans for fire safety and conduct mock drills. Fire Safety Audit is an integral & essential part of loss prevention strategy. The objectives of the Fire Safety Audit are to look after the safety, health & welfare of employees in the industry, to maintain the high standards of safe operation and to OBJECTIVES OF FIRE AUDIT: Assess good management practices; Identify the available material (fuels) for fire. Identify the sources of ignition Evaluate the possibility of occurrence of fire Assess the : * Adequacy and efficacy of existing Fire Safety management systems * Means of escape * Staff training * Fire warning systems * Means of fighting fire * Assess risks from unregulated materials and practices; and Make specific recommendations to improve the effectiveness of existing procedures, practices, and safety management system to prevent fire incidents as well as to mitigate fire emergencies.

JOGI conducts third-party safety audits, generate a report that identifies any corrective actions required, and then indicate facility safety solutions based on “Best Practices”.Our customized methodology has been designed to deliver findings and measures which truly proves to be a value-addition to client’s HSE systems and has proved to us the most reliable consultants for Third-Party Safety Audits. Objectives To identify the potential fire, safety & health hazards, Study the existing systems, procedures, control measures, etc., Recommend proper measures & procedures for controlling the hazards identified, Recommend measures for improving the effectiveness of the existing systems, practices, procedures, etc.

Industries that handle large quantities of hazardous substances are required to demonstrate their capability to design, locate, operate, and maintain facilities to standards acceptable to the Govt. and public. There is no single ideal system of Hazard identification procedures. Among the tools available for occupiers and managers of hazardous installations to check and reassure the effectiveness of procedures and methods followed on safety, the most useful tool is Safety Audit. Health and Safety Executive of UK define Safety Audit, “as the structured process of collecting independent information on the efficiency, effectiveness, and reliability of the total health and safety management system and drawing up a plan for corrective action”.

Electrical safety audit is examining the safety of electrical installations of any industrial unit or organization. The audit is performed by experienced professionals by carrying out the inquiry, inspection, testing, and verification of various electrical installations in various chemical industries, pharmaceuticals, oil & gas, fertilizers, commercial complexes, etc. Electrical hazards continue to threaten the safety of people and property in the form of shocks, burns, injury, fire, and explosion. The purpose of an electrical safety audit is to identify potentially hazardous electrical situations and offers a structured path for continual improvement towards best practice status. In process industries, fire due to electrical installations is very probable, especially in industries handling flammable chemicals. In service industries like information technology, telecommunications, banking, and other commercial establishments, business interruption losses due to electrical hazards (fire in the server room, damage of expensive communication equipment, loss of data, fire in cable gallery, etc.) could be substantial.

Lightning probability Risk Factor will be calculated as per Facility Details given by Client. Review the existing lightening protection system against national standards Mechanical strength to withstand high wind velocity at time of thunderstorms Electrical conductivity for clear path for lightning Coverage area of lightning arrestor to cover factory area. Earthling termination is to be checked for low resistance . Suggesting improvements (if required) in the system to comply with applicable standards. Principles of Lightning Lightning is caused by the build-up of static electricity within a thundercloud. Negative charge accumulates on the bottom of the cloud and induces an equal positive charge on the surface of the earth. When the potential between the cloud and ground reaches about a billion volts, a downward leader begins to move from the cloud towards the earth. When the downward leader gets to about 200 meters from the earth, upward streamers are launched from the earth towards the downward leader. When the downward leader connects with an upward streamer, then the visible lightning strike is formed and massive current flows between the cloud and earth.

We, at JOGI SafeTech Pvt. Ltd., specialized in customized HSE Training's, which incorporate the specific needs and purposes of the client, adapts to their existing plans, procedures and work environment and considering level and understanding of target audiences. So, all the training solutions can be customized suiting your specific requirements and your work culture. Any other requirement of training under EHS domain can be develop and delivered on request Our training modules have been developed by highly experienced faculties having rich experience in various sectors of industries. Ours is a Recognized Training Institute by DISH, Gujarat as per Section III A.