-
Min. Order (MOQ)
1 Piece(s)
We are offering solar pump controller. Solar ac pump controller with inbuilt mppt function (solar ac pump inverter)
a transformer less inverter system, 415 vac 3-phase output voltage and v/f control to manage pump starting condition (soft start). The equipment is micro controller based and operated with software for digital control of inverter parameters, fault finding diagnostics and digital i/o signalling.
with the inbuilt mppt (maximum power point tracking) function, it regulates the output frequency according to irradiation in real time to achieve the maximum power. Adopting the proposed dynamic vi maximum power point tracking (mppt) control method, fast response and stable operation can be possible, better than the conventional methods, it can overcome the problems including poor tracking performance, unstable or even cause water hammer damaging when the irradiation on the array changes rapidly.
salient features of solar ac pump controller
due to designed for power existing ac pumps, service is easy and available anywhere.
can be designed for pumps from 1 hp to 200 hp.
as per iec/bis standard (applied for approval).
protection functions: dry running, tank over flow, over/low input voltage, over current and over load protection, reverse polarity etc.
high quality, low cost, compact design and high reliability.
high efficiency: 96%-98%.
very low harmonic content.
dual mode operation: can be operating on electric power at night and solar power at day time.
inverse exponential speed variation at the time of lack of solar radiation.
can be integrated with existing system.
possibilities for monitoring from remote area.
can be monitored large number of solar water pumping systems centrally.
the pump works automatically as the sun rises and falls.
standard specification of solar ac pump controller:
hp (kw) : 1 to 200 hp (0.75 to 160 kw) note: can be developed up to 500 hp
dc input voltage : 450 to 700 vdc 10%
ac input voltage : 380 to 460 vac 10%
output current : 3 to 260 amp
overload current : 150% for 60 seconds, 200% for 1 second
protective method : ip 65 enclosed type
output frequency : 50hz/60 hz
allowable fluctuation (in freq.) : 5%
motor type : asynchronous(induction) motors and synchronous motors
cooling method : force air cooling method
harmonic distortion : thd < 5%
ambient temperature : -10 to +60c
storage temperature : -20 to +65c
relative humidity : 20% to 93%
use environment altitude : max 1000m. For best performance.
Additional Information: