Amritsar, Punjab, India
Our Products
This machine serves for the economical production of saddle stitched brochures like note-books, magazines, catalogues and similar printed matter. Simple maintenance and quick make-ready of stitching heads, assured reliable and efficient production. Sheet-gathering chain with two hand fed station. Counter for continuous counting of the stitched brochures. Belt delivery for finished product.
| Maximum Gap between Heads | 300 MM (16") | 660 mm (28") |
| Minimum Gap between Heads | 63 mm (21/2") | 63 mm (21/2") |
| Maximum Stitching Capacity | 8 mm (5/16")/160 Pages | 8 mm (5/16")/160 Pages |
| Minimum Stitching Capacity | 4 page | 4 page |
| Staple Crown Size | 12.5 mm (1/2") | 12.5 mm (1/2") |
| Stitching Wire Round | 24 No. | 24 No. |
| Speed | Variable Speed upto 4000 C/h | Variable Speed upto 4000 C/h |
| Power Required | 2 HP Single/Three Phase 960 RPM | 2 HP Single/Three Phase 960 RPM |
This machine is most convenient for use for hard-bond books. The sheets of paper are picked up with the grippers at stations 1 and 2 and taken to a transport chain. This transports the paper through the gluing station where they are merged. Finally the paper are passed on to the delivery unit via the pressing station
| |||||||||||
| Largest Size of book | 100 to150 Section/mm | 610 x 330 mm (24" x 13") |
| Smallest Size of book | 150 x 100 mm (6" x 4") | 150 x 125 mm (6" x 5") |
| Number of Stitches | up to 7sets | up to 11 sets |
| Speed | 70 to 110 signatures per min. Speed depends upon the opreator |
50 to 90 signatures per min. Speed depends upon the opreator |
| Motor | 0.75 KW (1 HP), 1400 rpm with variable speed controller |
0.75 KW (1 HP), 1400 rpm with variable speed controller |
| ||||
An ideal way to bind the books with hot-melt glue and give them attractive, strong and durable shape. A suitable solution to meet your client's needs and to keep pace with the modern printing speeds. Simple and dependable operating system requires only two operators and cuts the costs effectively.
| It is meant for pressing the spine of book. Nipping the process of reducing / knocking out the swell in the spine of a thread sewn book-block, being prepared for Hard-Case or Soft-cover binding adding in firmness, solidity and enhanced quality of the finished product book. | ||
Kmc-Marvel Stitcher is meant for stitching the boxes. It can be supplied with 8 mm(5/16") both in Angular and Straight thickness capacity stitching head and is efficient to speed up to 300 stitches per minute with complete safety and simplicity of operation and maintenance. All parts of the head mechanism are easily accessible for cleaning, lubrication and inter-change of wire parts
| Size | 20", 30", 36", 42", 48", 60" (Straight/Angular) |
| Maximum Stitching Capacity | 16 mm |
| Stabbing | 18 mm |
| Stitching wire round (S.W.G.) | No. 12/25 -14/25 - 17/25 |
| Speed | 300 Staple/Min. |
| Staple Crown | 12.5 mm |
| Power required | 1/2 Hp Single/Three Phase Motor |
KMC 6000 Sewing Master is newly introduced in the country with latest technology and function. This heavy duty thread book sewing machine is for sewing large size ledger books, registers and other long books.
This is very simple and easy in operation. The machine is totally risk free. It has very good accessibility to all structured units. This machine is fully maintenance free machine and excellent in production.
This machine is most convenient for use of 1 to 6 staples as required. Gaps are adjustable. Specially Design for copy and register stitching.
| ||||
| Book width | 71 cm (28") | 81 cm (32") | 91 cm (36") | 101 cm (40") |
| Book Spine (Min.-Maxi.) | 5-50 mm | 5-50 mm | 5-50 mm | 5-50 mm |
| System Clamp Pressure | 6000 kg. | 6000 kg. | 6000 kg. | 7000 kg. |
| Pressure Platen | 71 x 9 cm | 81 x 9 cm | 91 x 9 cm | 101 x 9 cm |
| Squaring Pressure | 2000 kg | 2000 kg | 2000 kg | 3000 kg |
| Electrical Load Motor | 2.25 KVA/3H.P. | |||
We offer a wide range of corrugated board & box making machines. We provide these machines in several models and sizes to meet the requirement of related Industry. Corrugation machines are available with normal speed to high speed models and with various fluting options i.e. A, B, C, E & F flutes to meet the requirement both corrugated boxes as well as printed cartons. We also supply the allied machines to make 3, 5, 7, 9 etc. ply corrugated boards & different machines to make complete corrugated box.
Oblique type high speed model offers high rate of production. The machine is fitted with Gear Box which runs in oil bath. The machine has motorised self loading reel stand, 3heaters & 1 pre heating cylinder.
| SIZES IN INCHES | 32" / 42" / 52" / 62 / 72" | 32" / 42" / 52" / 62 / 72" | 32" / 42" / 52" / 62 / 72" |
| Power (HP) | 7" / 7 / 9.5 / 9.5 / 10.5 | 7" / 7 / 9.5 / 9.5 / 10.5 | 7" / 7 / 9.5 / 9.5 / 10.5 |
| Floor Space (Feet) | 6x16/7x16/8x16/9x16/10x16 | 6x16/7x16/8x16/9x16/10x16 | 5x15/6x15/7x15/8x15/9x15 |
| Heating Load (Kw) | 21 / 27 / 29 / 31 / 31 | 31 / 31 / 31 / 35 / 35 | 21 / 21 / 27 / 27 / 27 |
| Out Put (per minute) | 90 / 90 / 90 / 90 / 90 | 150 / 150 / 150 / 150 / 150 | 50 / 50 / 50 / 50 / 50 |
| Weight (in100 kg) | 45 / 50 / 60 / 65 / 75 | 45 / 50 / 60 / 65 / 75 | 32 / 38 / 42 / 45 / 50 |
It is meant for creasing the cover of a paperback book. The machine can also used for perforating the papers. With unbeaten precision and quality, the machine will be an asset to any printing house to produce the paperback books of international standards.
| Title Creasing Cum Micro Perforating Machine (Non Variable/Single Speed) | Title Creasing Cum Micro Perforating Machine (With Variable Speed Controller) | Title Creasing, Micro Perforating Cum Half Sticker Cutting Machine (With Variable Speed Controller) | |
| Maximum Title Size | 610 mm(24") | 610 mm(24") | 610 mm(24") |
| Minimum Title Size | 100 mm(4") | 100 mm(4") | 100 mm(4") |
| Number of Single/Double Creaser | 2 Set each | 2 Set each | 2 Set each |
| Perforation/Slitting Assembly | 1 Set each | 1 Set each | 1 Set each |
| Number of Half Cutting Assembly | - | - | 6 Nos. |
| Power Required | 0.37 KW (1/2HP) | 0.37 KW (1/2HP) | 0.37 KW (1/2HP) |
Heavy duty platen (Die) cutting, creasing, embossing presses are particularly designed for die cutting, scoring and creasing work on paper, linoleum, card board, corrugated board, fibre board, cork, leather, P.V.C. material etc. Most handsome and compact patronized model requires minimum floor space, minimum make ready time and provide sufficient hourly production. The Kalsi heavy duty platen die cutting, creasing, embossing presses are offered with widest range of sizes to suit multiple applications. Kalsi presses are ideal to cut corrugated card board & solid fibre boxes, carton decals, puzzles, games, advertising displays, greeting cards, vinyl cutting letters, half cut stickers etc.
| Platen Size (in MM) | 23"x29"(583x735) | 25"x35"(635x890) | 28"x40"(710x1015) | 36"x46"(900x1165 | 41"x54"(1040x1370) | 46"x66"(1170x1675) | 50"x70"(1270x1778) | 55"x86"(1387x2184) |
| Inside chase | 20"x26" | 22"x32" | 25"x37" | 32"x42" | 37"x50" | 42"x62" | 50"x70" | 51"x82" |
| Out put / Hour | 2000 | 1800 | 1600 | 1500 | 1200 | 1000 | 800 | 650 |
| Pressure Exerted (In Ton) | 165 | 190 | 250 | 290 | 330 | 375 | 380 | 450 |
| Power (HP) | 3 | 3 | 5 | 7.5 | 7.5 | 10 | 10 | 15 |
| Floor Space | 60"x45" | 60"x50" | 65"x55" | 70"x60" | 75"x70" | 85"x80" | 90"x85" | 102"x96" |
| Weight (approx) | 2800 kg. | 3700 kg. | 4800 kg. | 6300 kg. | 7500 kg. | 11,500 kg. | 12,000 kg. | 18,000 kg. |
| This machine is most convenient for use of 1 to 4 staples as required. Gaps are adjustable. Specially Design for copy and register stitching. |
| Widest range of KMC wire stitchers is available in single head model adjustable table, compact design, high production are salient features of these stitchers. |
| Widest range of KMC wire stitchers is available in single & double head model adjustable table, compact design, high production are salient features of these stitchers |
| Maximum Gap between Heads | 115 mm (4.5") |
| Minimum Gap between Heads | 63 mm (2.5") |
| Maximum Stitching Capacity | 160 Sheets |
| Minimum Stitching Capacity | 4 Sheets |
| Staple Crown Size | 12 mm |
| Wire Range | No. 20 S.W.G. to No. 26 S.W.G. |
| Speed | 150 Staples/Minute |
| Power | 1 HP Single/Three Phase Motor |
