Write a Review
Our Products
Trolleys
2 Products availableTiller
2 Products availableDrilling Bits, Chucks & Collets
1 Products availableAgriculture Tools
1 Products availableCultivators
1 Products availableIrrigation Equipment & Systems
1 Products availableAgricultural Equipment
1 Products available
Technical Specifications
| Technical Data | DMW 60 | DMW 75 | DMW 90 |
|---|---|---|---|
| Overall Width | 72" | 87" | 102" |
| Working Width | 60" | 75" | 90" |
| Row Number | 9 rows | 11 rows | 13 rows |
| Row Spacing | 7.5 " | 7.5 " | 7.5" |
| Seed Capacity | 65 Kg | 95 Kg | 120 Kg |
| Fertilizer Capacity | 70 Kg | 90 Kg | 115 Kg |
| Power Required (HP) | 35 Hp | 40-45 Hp | 50 Hp |
The Agricultural Cultivator, we offer, is a farm instrument for stirring and pulverizing the soil, either before planting or to remove weeds and to aerate and loosen the soil after the crop has begun to grow. Our Agricultural Cultivator is powered by a tractor and stirs the soil, usually to a greater depth than does the harrow (which is usually empowered). The Agricultural Cultivator, we offer, is pulled by tractors and can vary greatly in size and shape, from 10 feet (3 m) to 80 feet (24 m) wide. Many are equipped with hydraulic wings that fold up to make road travel easier and safer. Different types of Agricultural Cultivator are used for preparation of fields before planting, and for the control of weeds between row crops.
Features :
Benefits :
Technical Specifications
| 9 TYNE | 11 TYNE | |
|---|---|---|
| FRAME | 75x40 mm (Channel) | 75x40 mm (Channel) |
| SPRING TYNES | 9.5mm WD,50mm OD 27 Coils 50x19 mm (Forged) | 9.5mm WD,50mm OD 27 Coils 50x19 mm (Forged) |
| PAIRS ANCHOR PIN | 50x8mm Flat 25 mm | 50x8mm Flat 25 mm |
| NUTS FRAME BOLT | Nylock M 12 x 32 (High Tensile) | Nylock M 12 x 32 (High Tensile) |
| TYNE BOLT LINKAGE 3 POINTSHOVEL | 16x90 mm 50x12 mm 8mm EN-45 | 16x90 mm 50x12 mm 8mm EN-45 |
| LENGTH | 2000 mm | 2457 mm |
| WIDTH | 712 mm | 712 mm |
| HEIGHT TILLER PIN | 533 mm 28mm | 533 mm 28mm |
| WEIGHT | 215 Kg. (Approx.) | 265 Kg. (Approx.) |
Our Heavy Duty Spring Loaded Tiller has been designed understanding the needs of the farmers, with nine tines mounted in two rows. Our range of Heavy Duty Spring Loaded Tiller eliminates the use of the plough and each tine is mounted with two strong coil spring. This feature allows the tines to ride over obstructions in the soil easily to enable the Heavy Duty Spring Loaded Tiller to be used in stone and root obstructed soil. Being a little heavier than the other 9-tine tiller, our Heavy Duty Spring Loaded Tiller can aerate soil to a depth of one foot. In this Tiller 2.316" reversible shovels are fitted. The front and the rear tines can be spaced as desired for either raw crop or general cultivation work because holes in the frame are provided at one-inch interval. We have also used special steel forged tines and high tensile bolts in our Heavy Duty Spring Loaded Tiller.
Features :
Benefits :
Technical Specifications
| No. of TYNES | 9 TYNE | 11 TYNE | 13 TYNE | 15 TYNE |
|---|---|---|---|---|
| FRAME | 75X40 mm (Channel) | 75X40 mm (Channel) | 100X50 mm (Channel) | 100X50 mm (Channel) |
| SPRING | 10 mm WD, 50 mm OD | 10 mm WD, 50 mm OD | 10 mm WD, 50 mm OD | 10 mm WD, 50 mm OD |
| COILS | 26 Coils | 26 Coils | 26 Coils | 26 Coils |
| TYNES | 50 x 19 mm (Forged) | 50 x 19 mm (Forged) | 50 x 19 mm (Forged) | 50 x 19 mm (Forged) |
| PAIRS | 50X8 mm Flat | 50X8 mm Flat | 50X8 mm Flat | 50X8 mm Flat |
| ANCHOR PIN | 25 mm | 25 mm | 25 mm | 25 mm |
| NUTS | Nylock | Nylock | Nylock | Nylock |
| FRAME BOLT | M 12 x 35 | M 12 x 35 | M 12 x 35 | M 12 x 35 |
| TYNE BOLT | M 16 X 95 | M 16 X 95 | M 16 X 95 | M 16 X 95 |
| THREE POINT LINKAGE | 50 x 12 mm (Rear & Front) | 50 x 12 mm (Rear & Front) | 50 x 12 mm (Rear & Front) | 50 x 12 mm (Rear & Front) |
| TILLER PIN | 32 mm | 32 mm | 32 mm | 32 mm |
| SHOVEL | 8 mm EN-45 | 8 mm EN-45 | 8 mm EN-45 | 8 mm EN-45 |
| OVERALL WIDTH | 2000 mm | 2457 mm | 2914 mm | 3371 mm |
| OVERALL LEANTH | 825 mm | 825 mm | 825 mm | 825 mm |
| OVERALL HEIGHT | 1118 mm | 1118 mm | 1118 mm | 1118 mm |
| WORKING WIDTH | 2057.4 mm | 2514.6 mm | 2971.8 mm | 3429 mm |
| WORKING DEPTH | 203-228 mm | 203-228 mm | 203-228 mm | 203-228 mm |
| WEIGHT | 215 Kg. | 265Kg. | 315 Kg. | 365 Kg. |
Our Non Tipping Tractor Trolley is assembled through jigs, fixtures & dies, which ensure joining accuracy as well as interchangeability. The Non Tipping Tractor Trolley, we offer, is available in single or double axle-as per requirement of the customer. Our Non Tipping Tractor Trolley features rugged construction for general use in transporting agriculture inputs and harvests from farms. Our Non Tipping Tractor Trolley comes with drop side loading and unloading and tipping type provided with hydraulic.
Attributes :
Rajendra Saraf (Kamdhenu Agro Industries)
Modern Agricultural Implements Industries, S.h.no.- 18, Diversion Road, Badnagar, Dist.-, Ujjain, Madhya Pradesh - 456771
Share us via
View Contact Number 
