Other Products / Services #34285

To keep a strict check on the quality of the products, we have hired professional quality analysts having rich domain experience. We are a quality centric organization, offering the best-in-class products that are manufactured using the experts approved and certified raw material procured from reliable sources.

 

Uses and application areas :      

• Industrial flooring
• Warehouse Floors.
• Car Park Decking.
• Residential Garages.
• Dairy and Hotel Industry.
• Non-slip rampways.
• Pedestrian walkways.
• Food Processing Plants.
• Helipads.
• Trafficable Roofs.
• Bridge Decks.

We are leading manufacturers of Acrylic Polymer Emulsions intended for manufacture of Interior Exterior Water based Paints. Our range of products include Styrene-Acrylic Emulsions & Pure Acrylic Emulsions for the Paint Industry. Our range of products for the Paint industry include Kamicryl-295 (50% Solids Styrene-Acrylic Copolymer for InteriorExterior Paints), Kamicryl-3045 (46% Solids Styrene-Acrylic copolymer for PuttyDistemper Paints), Pure Acrylic Emulsion Kamicryl-61 (For High GlossSheen Exterior Paints), among others.

When adequate proportion of Veova is used in these polymers, they produce a tough film which has excellent water and alkali resistance. But such a polymer can be prohibitively expensive as Veova is a costly monomer which has to be imported into the country.

All thanks to our modern transit amenities owing to which we are capable to furnish safe and time-bound deliveries. One of the leading companies based in Mumbai(India), we are a known for the exceptional assortment of products.

We procure the basic material, required for manufacturing flawless lot of products, from the genuine and authorized vendors only. As a result of which, our offerings have no match in the market. Our organization is endowed by a massive circulation system that allows us to reach purchasers wherever and distribute orders on schedule.

With immense knowledge and expertise in this domain, we have made our position in the domestic market by providing textile printing binders. We are Mumbai(India) based organization, affianced in making available the finest lot of products in the market.

We are aware about the insecurities involved while making online transactions, thus, we strictly offer online and offline payment modes that are handled by the professionals only. Our main concern is to deliver top-of-the-line quality products and for this, we check the entire lot on several quality parameters.

The range, we offer, is stringently checked for the raw material used; our quality auditors ensure that the final product is sternly designed using the beat in class inputs to bring forth quality range. Backed by a hardworking team, we are capable of offering the Kamicryl 5010 Thermoplastic Acrylic Resin as per the exact requirements of the buyers.

Typical Applications :

• Hard but flexible coatings/paints for vinyl plastics and Polystyrene surfaces
• Upgrading of alkyd based synthetic enamels and marine paints
• Automotive finishes and refinishes
• Metal decoration coatings and lacquers
• Concrete coatings and sealants

To keep the extensive array of products safe till final dispatch, we have a well-structured and organized warehouse that is well maintained by veteran professionals. As our payment methods are practical and convenient, we are highly recommended by the clients. We provide option to pay in cash as well as through bank transfer.

 

Film properties :

• Elastomeric and flexible
• Outstanding water and chemical resistance
• Excellent adhesion and U.V. Stability
• Tack free film

 
Recommendation for end-use :

• Elastomeric Paints and Coatings
• Coatings on flexible substrates such as leather etc.

In order to ensure the safety of the products, we carefully store the lot under hygienic conditions and safe environment. Moreover, the lot is stringently and regularly checked by the experts. Our company stands tall among the victorious Suppliers of Kamthane K -1492 and offers the most lucrative deals to the customers.

 

Film properties :

• High clarity, Hard and flexible
• Excellent water and alkali resistant
• Excellent abrasion, chemical & impact resistance.
• Good alcohol resistance
• Adhesion to many substrates.

Recommendation for end-use :

• Concrete & rigid substrate coatings
• Industrial waterproofing coatings
• Multi-surface & paint coatings
• Metal, plastic & wood coatings
• Parquet floorings

Our team of quality analysts strictly tests each product against varied quality parameters ensuring zero defects at buyer's end. Make payment securely with a payment option you are comfortable with. We accept payment through offline as well as online modes. We make sure proper documentation is done.

 

Advantages :

• Life and durability of the structure is increased.
• Non-yellowing and Anti-fungal.
• Easy application, no machinery required.
• Provides seamless and joint free seal throughout the surface, which is impervious to water.
• Lower labour cost due to easy, simple and quick application.
• Excellent bonding to most building materials.
• As the system is a water based system it is non-hazardous as compared to solvent based  systems and can be used for laying of clean rooms.
• As the molecule size is 0.010 microns it has excellent penetration and sealing capacity and can be used on the base plaster against efflorescence before putty and paint.

With complete help and support of our team members, we deliver high grade and excellent range that commensurate to globally accepted standards. We have trustworthy shipping facilities available to make on time deliveries to the destination.

 

Description/Use :  Kamicryl-CS0002 is a newly developed premium water base concrete sealer primer utilizing the latest available technology. The coating incorporates water base pure acrylic and polyurethane technology offering superior adhesion and early water resistant properties. Excellent adhesion to difficult substrates including cementitious, glass and glazed tiles, Paver Blocks, Wood, Metals, Plastics, etc.

Our product range is secured properly with premium packaging materials that protect the products from mechanical damage and ensure the product delivery is safe and without damage. We have a strong distribution network, owing to which we efficiently transport the goods to the desired place. The superior quality of Kamicryl - CS 0003 HS Clear PU Top Coat we offer has a quality warranty of 12 months.

We undertake online payment procedures which are completely safe and hassle free. The online transactions are supported by advanced security features. We are involved in providing excellent grade range of products from our facility in Mumbai(India).

 

Benefits : Kamflex WP provides many benefits to the user including :

• Water based for easy clean up in water
• Flexible Class 3 membrane ( 300% + Elongation)
• Eco-Friendly low odour for easy use without irritation
• Fast drying can be recoated after 3-5 hours at normal room temperature
• UV stable non yellowing, can be used externally 
• KAMFLEX WP External/Internal applications can be used both internally and externally (saves the user from buying two separate water proofing systems)
• Compatible works well with many cement based tile adhesive
• Reinforcement does not requiring reinforcing for it to be effective
• Excellent crack-bridging properties
• Passes the Australia / Newzealand international waterproofing building code of practice standards, approved by CSRIO ( NATA) lab.

Experts' assistance is what makes our packaging reliable and highly durable as well. The packaging material used is certified and experts approved to ensure complete safety. For the convenience of the clients, we issue an invoice to them including the details of the sale transaction as well as indicating the quantities, products as well as agreed price. Thus, we maintain transparency in our dealings and payment procedures.

 

Description :

• Sealtite is an aqueous Co-polymer emulsion specially formulated for use with cement.
• Sealtite modifies the property of cement in mortars and in concrete to make them perform
• better in terms of water proofing, repair, corrosion inhibition, bonding, durability and wear
• resistance.

 

Primary Uses :

• Corrosion protection of steel.
• Floor screed and topping.
• Concrete and floor screed repairs.
• Water proofing and tanking of basements.
• Bonding old concrete to new concrete.

Advantages : Water resistant, excellent adhesion to concrete, steel, brick, stones, compatible with cement. High compressive, tensile and flexural strength. Resistant to ingress of salts, mineral oils etc. Non toxic. Suitable foruse in potable water tanks. Excellent corrosion protection. Economical when compared with epoxy mortars.

Directions for Use :

• Method
  • On a cleaned and prepared surface apply Sealtite bonding slurry.
  • Apply Sealtite modified mortar by float or trowel to form an uniform smooth surface.
  • Bonding slurry sets very fast hence modified mortar application should be fast and immediately after application of bonding slurry.
  • Moist cure for 24 hours and then allow it to dry off.

• Preparation - Bonding Slurry = Cement + Sealtite  1 + 1

Note : Applied bonding slurry sets very fast. 1 LTR Sealtite with 1 kg of cement gives aslurry which covers 25 to 30 sq/ft. on smooth even surface.

 

Typical Applications :

• Corrosion Repairs of  Beams, Columns and Slabs
  • Remove the cover concrete and cutback to the sound concrete zone.
  • Remove all the rust from the reinforcement by mechanical means.
  • Apply one coat of Sealtite bonding slurry on the reinforcement and the surrounding concrete surface.
  • When the bonding slurry is still tacky apply modified mortar by pressing in position using 10  litre Sealtite  per 50kg bag of cement. Modified mortar can be applied upto a thickness of  20mm. For building up to higher thickness leave the first layer to dry overnight and apply second layer with one more coat of bonding slurry.
  • Moist cure for 24 hours and allow it to dry off.

•  Industrial Floor or Floor Duct Nosing Repair
  • Cutback to sound concrete surface and make the surface wet.
  • Apply the bonding slurry and when it is still wet apply the Sealtite modified mortar using 10     litre of Sealtite per 50 Kg bag of cement
  • Feather edge to match the original floor level. In case of nosing carefully build up the edge and give a smooth finish.
  • Moist cure for 24 hours and allow it to dry off.

• Bonding old Concrete to New Concrete:
  • Vertical Joint - Apply Sealtite bonding slurry on the prepared wet old concrete vertical surface and pour the concrete.
  • Horizontal joint - Pour and spread Sealtite bonding slurry on the wet old concrete surface to a thickness of 3.5 mm and pour fresh concrete.

• Plaster & Screed Mortars
  • Sealtite is admixed at a dosage of 2 litres per 50 kg bag of cement to improve properties of general plaster and screed free from shrinkage crack and for achieving higher compressive and tensile strength.
  • Screeds over water proofing membranes and patch up repairs before application of water proofing membranes are done with Sealtite admixed mortars.

 

Flexural Strength :  28 days - 92 Kgs/cm² (9 N/mm²)

 

Technical Information :

• Typical Engineering Data
• Physical Properties of Sealtite
• Appearance - Free flowing white liquid - dries off to colourless
• Sp. gravity - 1.01
• Shelf life - 1 year in unopened containers
•  Typical Result of Sealtite
• Modified Portland Cement Mortar
• Compressive Strength ASTM C190
• (50 mmm) cubes
  • 3 days - 210 kg/cm²
  • 7 days - 280 kg/cm²
  • 28 days - 340 kg/cm²

• Flexural Strength ASTM C190 - 28 days - 90 kg/cm²
• Bond Strength ASTM C-78 - 14 days - 80 kg/cm²

We conduct payment procedure in a safe manner through both online and offline processes. You can conveniently pay in cash as well as through bank transfer. Buy the best quality Kamicryl Elastofalt at market leading prices, from us. We are amid the prominent Suppliers in the town.

 

Uses : For waterproofing of

• New roofs.
• Balconies, terraces, parking garages, asbestos and concrete roofs.
• Industrial washrooms & shower
• Water reservoirs and swimming pools.
• Foundations, cellar walls, retaining walls, bridges abutments.
• Refurbishing of old waterproofing system including torch-on membrane.
• Facade damp proofing.
• Water proofing/Curing membrane and protective coating for sub structure.

 

Features :

• Single component and cold applied.
• Kamicryl Elastofalt has excellent UV resistance and long term ageing stability.
• Cured membranes from Kamicryl Elastofaltremain highly flexible even at extremes of temperatures (-25^oC to 120^oC).
• Excellent vapour barrier.
• Easy to use.
• Non-flammable and Non-toxic
• Environment friendly.
• Resistant to chlorides and sulphates commonly present in the soil.
• Compatible with cementatious tiling adhesive.

 

Surface Preparation : All surfaces should be sound, clean and free of contaminants. Absorbent surfaces e.g. concrete should preferably be dampened with water. In kitchens, toilets and other wet areas all the openings should be properly sealed. On all weak points such as cracks or around the pipes use a woven fibreglass mesh as reinforcement between the two coats of Kamicryl Elastofalt.

Application :

• Kamicryl Elastofalt can be applied by brush, roller or squeegee. Hot, dry or very porous substrate should be dampened with clean water prior to application of Kamicryl Elastofalt. When two or more coats are required, ensure that the preceding coat is fully dry before applying the successive coat, which should be applied at right angle to proceeding coat.
• Kamicryl Elastofalt also acts as a non-degradable curing membrane; hence it may be applied immediately after the removal of mould, to the concrete structure, which has no aesthetic value such as the sub structure of the building.

 

Layer Thickness : 1.5 mm. For higher performance Glass Fibre reinforcement can be applied between 2 coats of Kamicryl Elastofalt.Packing 200 kg drum.

Storage/Shelf life : Keep away from direct sunlight and store under normal warehouse conditions. Container must be tightly closed. Shelf life of the product is 12 months from the date of manufacturing provided it is stored in unopened factory packed drums

Cleaning : Tools may be cleaned with water as long as the product is wet. Once dry, by mechanical means only.

Health and Safety : Use normal safety precautions. Wear rubber hand gloves, safety shoes and safety goggles while using and handling the product. Avoid contact with skin and eyes. In case of accidental contact with eyes, wash with plenty of water and seek medical treatment immediately.

We are a Mumbai(India) based organization involved in offering high quality products to the clients. With the aid of secure payment procedure and a team of adroit professionals, we have marked our prominence in the market. Our payment procedures ensure faster trade.

 

Uses and application areas :      

• Industrial flooring
• Warehouse Floors.
• Car Park Decking.
• Residential Garages.
• Dairy and Hotel Industry.
• Non-slip rampways.
• Pedestrian walkways.
• Food Processing Plants.
• Helipads.
• Trafficable Roofs.
• Bridge Decks.

Owing to our capacity of meeting the exact requirements of the clients, we are supplying quality Kamicryl PR CX 15 HYB. We keep the finished assortment of products in highly developed and spacious space. This helps us in keeping products secure and sorted.

 

Benefits :

• Good binding capacity & excellent scrubs
• Direct adhesion to metals & use in metal primers
• Good adhesion to alkyd, galvanized iron
• Good adhesion to timber, concrete and masonry
• Multipurpose coatings for decorative paints for interior
• High Tensile Strength.

Since establishment, our organization has associated with leading traders and dealers. Thus, we serve patrons in Mumbai(India) without any problem. Our procedures of payment are lawful, simple, and secure. We do not levy concealed charges while presenting the invoice and make sure payment is carried out securely from you to us.

 

Introduction :

• Kamthane RAR THX Urethane Hybrid dispersion is designed as a binder for elastomeric wall coatings. This emulsion produces durable coatings with the excellent elongation and recovery characteristics necessary to bridge dimensionally unstable cracks without cracking or wrinkling.
• Kamthane RAR THX emulsion employs a chemistry that imparts excellent dirt pickup resistance to coatings based on it. As a result, these formulations retain an attractive appearance as they age. In addition to elasticity and durability, coatings based on Kamthane RAR THX emulsion are permeable to water vapor, which permits moisture in the masonry substrate to escape without causing blisters.