Other Products / Services #135215

Jigs & Fixtures are specially designed to carry required current from the rectifier to the components and thus are made from electrically conductive materials. We are trusted Manufacturer and Supplier of Jigs & Fixtures in New Delhi. The Jigs & Fixtures are custom-built depending upon shape, variety and quantum of components and also to complement tank sizes. We have also developed custom-built Jigs that have been developed for small bore and long length tubes such as gun barrel and cylinders.

Details : Highly specialized jigs are those used also for internal coating on bicycle / motor-cycle rims which require anodes not only externally but also internally.    

Our Tanks are constructed from high quality Polypropylene, which are duly reinforced with coated steel supports. We are enlisted among the reliable Manufacturers and Suppliers of Polypropylene Tanks in New Delhi. State-of-the-art machines are used for other fabrication processes like welding, cutting, bending etc; to ensure durability and high quality standards. We are capable of delivering bulk orders of the Polypropylene Tank within stipulated time and at nominal rates.

Details

• The larger tanks are welded by extrusion welding process, ensuring better homogenous bonds and higher joint strengths.
• Normally, it does not require lining, bonding and thermal insulation

Low maintenance, compact in design and light weight completely defines our Air Agitation Unit. We are remarked as a renowned Manufacturer and Supplier of Air Agitation Units in New Delhi, India. The Air Agitation Units we make available are oil-free and features noiseless operation. Our Agitation Unit prevents localized concentration of drag-in and it minimizes the amount of rinse water needed. Buyers can obtain the Agitation Unit at market-leading rates.

Details

• It features non-pulsating flow.
• This means finer grain deposits and higher plating speeds.
• Lower rinse water loads reduce the size and cost of water treatment equipment required by environmental authorities.

Technical Information

• Oil-free, no lubrication required.
• Non-pulsating flow.
• Low maintenance.
• Compact in design.
• Light weight.
• Low noise.

Typically, Following Capacities Are Popular :

• Cu Feet/ minHorse Power
• 40 cfm2.5
• 70 cfm3
• 100 cfm5
• 150 cfm5
• 200 cfm7.5
• 300 cfm10
• 400 cfm12.5

Buy impeccable quality Electroplating Scrubber at reasonable rates from us. Our company shares glorious credentials with the leading Manufacturers and Suppliers of Electroplating Scrubbers in New Delhi. The body of the Electroplating Scrubber is made of polypropylene, reinforced with FRP suitable for and up to 100 mm. wg pressure fan. The entire range of the Electroplating Scrubber is quality tested on various parameters before the final dispatch.

Scrubber will be complete with the following :

• Mist Eliminator
• Collection sump, in MS with internal PVC lining
• Column of raschig/ pall ring
• Spray nozzles
• Circulation pump of polypropylene

For effective segregation of the sludge from treated liquid use our Electroplating Sludge Settler. We are successful Manufacturer and Supplier of Electroplating Sludge Settler in New Delhi. The size of the Electroplating Sludge Settler is determined by volume of effluents and periodicity of effluent generation / disposal. Our Electroplating Sludge Settler has conical bottom. The solids are periodically pumped with the help of a screw-pump to sludge drying bed or filter press.

Details  

• Working : The settler is a tank with inclined walls, provided with inclined corrugated plates in between the walls. The effluent is made to pass parallel to the inclined plates in the vertical upward passage at pre-determined velocity. This results in settling of the suspended solids, which slide along the plates, down to the bottom of the settler.
• Ventilation : Pollution control is one of the most important aspects of metal finishing processes, many of which contain corrosive chemicals. Air pollution can be controlled by not only evacuation but also by washing of fumes, the former through an exhaust fan and the latter through scrubbers. Whenever fumes of neutralizing nature are combined, scrubbing may not be essential.  
• Exhaust Fan : The body of the centrifugal exhaust fan is made up of mild steel, internally lined with suitable anti-corrosive material. The impeller is made up of stainless steel and is dynamically balanced. Standard operating pressure is 62 mm wg.

Technical Information

• CFMHP
• 2500 cfm 5
• 5000 cfm7.5
• 7500 cfm10
• 10000 cfm15
• 15000 cfm25

Our Electroplating Filter Unit is engineered to provide absolute and economical removal of suspended solid or organic impurities from corrosive chemicals. We are reckoned among the reputed Manufacturers and Suppliers of Electroplating Filter Unit in New Delhi. The Electroplating Filter Units we make available are provided with reusable PP filter cloth along with filter paper. We are capable of delivering bulk orders of the Electroplating Filter Unit within stipulated time.

Buy excellent quality Electroplating Drying Machine at competitive rates from us. The company is a proficient Manufacturer and Supplier of Electroplating Drying Machines in New Delhi. Our Electroplating Drying Machines ensures faster drying and thus reducing the risk of staining and corrosion. Owing to our brilliant logistics network, we are capable of delivering bulk orders of the Electroplating Drying Machines within allocated time and at pocket friendly rates.

The Rim Plating Plant is an essential part of both for four-wheeler as well as two-wheeler industries. It is a specialized process, required to conform to high standards of finish with respect to aesthetics, as well as corrosion resistance. We are distinguished Manufacturer and Supplier of Rim Plating Plans in New Delhi, India. The Rim Plating Plants are manufactured using advanced technology in conformity with international quality standards and norms.

Leveraging on our vast industrial experience, we are remarked as a prominent Manufacturer and Supplier of Electroplating Polypropylene Pumps in New Delhi. The Electroplating Polypropylene Pumps we make available are manufactured in conformity with international quality standards and norms. To ensure that only flawless Electroplating Polypropylene Pumps reach the buyers, we carry out stringent quality tests before the final dispatch. Buyers can obtain the Polypropylene Pumps at market-leading rates.

Efficient & Dependable for :

• Acids
• Caustic
• Plating solution
• Effluent treatment                 
• Waste water treatment

Features :

• Flow up to 18m³/hr.
• Head up to 20mtrs
• SS cantilever shaft protected by heavy walled
• Polypropylene Sleeve
• Heavy duty cast iron motor support with ball bearing
• Separate pump shaft and motor shaft
• Rugged glass filled polypropylene impeller for long life

Standard available submersible length :

• 250mm
• 500mm
• 750mm
• 1000m

Reliable performance, accurate results and long functional life completely defines our Electroplating Rectifier. Our company is a proficient Manufacturer and Supplier of Electroplating Rectifier in New Delhi. The Electroplating Rectifier we make available is manufactured in conformity with international quality standards and norms. Strict quality checks ensure that only finest quality Electroplating Rectifiers reach the buyers. We are capable of delivering bulk orders of the Electroplating Rectifier within allocated time.

General Characteristics :

• Power factor is 85%.
• Transformer windings and bus bars are out of electrolytic grade copper.
• AC output control panel houses contactor, switch fuse unit either analog or digital and indicating lamps.
• DC control panel houses ammeter, voltmeter and operating switches.
• Current control can also be achieved through PLC with additional facilities of control of current density, voltage, etc

Typical rectifier outputs are as under :

• 8 V / 25012 V / 250 A16 V / 250 A
• 8 V / 500 A12 V / 500 A16 V / 500 A
• 8 V / 750 A12 V / 750 A16 V / 750 A
• 8 V / 1000 A12 V / 1000 A16 V/ 1000 A
• 8 V / 1500 A12 V / 1500 A16 V /1500 A
• 8 V / 2000 A12 V / 2000 A16 V / 2000 A
• 8 V / 2500 A12 V / 2500 A16 V / 2500 A

High accuracy, easy adjustments and long functional life are some of the attributes of our Salt Spray Test Chambers. We are distinguished Manufacturer and Supplier of Salt Spray Test Chambers from New Delhi. The Salt Spray Test Chamber is made from one piece molded (GRP) glass reinforced plastic of high strength and excellent corrosion resistance at elevated temperatures. Our Test Chamber is intended to carry out accelerated corrosion tests conforming to world standards such as ASTM B 117.

Advantages

• Sealed cabinet using simple self-generating water trap.
• Easy adjustment and monitoring of test conditions.
• Total atomization of salt solution, low rate of use: 0.5 litres per hour.
• Easy access to test panels or specimens.
• Automatic water level control in humidifier system.
• Accuracy + -2 deg. C on temperature and even fall-out throughout test chamber.
• Pumped and filtered salt solution fed to jet and large panel capacity.
• Test cabinet manufactured from non-corrodible materials.

Details

• Internal dimensions are approx. 845 x 655 x 865 mm, holding volume approx.
• 450 litres and 128 nos. standard panels of typical size 150 x 100 mm
• The roof unit is made of transparent polymer material for ease in examination of samples under test.

Our Electroplating Filters are designed for effective and efficient purification of baths with minimal downtime. We are nonpareil Manufacturer and Supplier of Electroplating Filter in New Delhi. The Electroplating Filter we make available provides filtration-surface areas per unit volume, thus enabling superior performance with ease of maintenance. The construction material of the Electroplating Filter is carefully chosen to withstand corrosion. We are capable of delivering bulk orders of the Filter within the stipulated time.

The company is remarked as prominent PVC Fabrication service provider based I New Delhi. We have on boar a team of experienced professionals who are the best in this field. Our team of experts provides specialized and accurate solution for particular fabrication techniques. Being a quality oriented firm, we ensure client satisfaction at any cost. Timely completion of the all the PVC Fabrication works makes our company the preferred choice among clients. We render the Services at industry-leading rates.

Are you looking for reliable Stainless Steel Fabrication services in New Delhi? You have reached the correct destination. We provide time-definite and reliable Stainless Steel Fabrication services. The backbone of our company is our team of brilliant professionals who render the best Stainless Steel Fabrication services. Timely completion of the Stainless Steel Fabrication works is ensured by our professionals. Being a quality oriented firm, we ensure client satisfaction at any cost. We render the Stainless Steel Fabrication services at market-leading rates.

We bring forth an array of Oil Separators. Our company stands tall among the reliable Manufacturers and Suppliers of Oil Separators in New Delhi. The Oil Separators we make available are manufactured in conformity with international quality standards and norms. To cater bulk requirements of buyers, we maintain a large stock of Oil Separators in our state-of-the-art warehouses under optimum conditions. Buyers can obtain the Oil Separator at pocket friendly rates.

Details  

• Working : The settler is a tank with inclined walls, provided with inclined corrugated plates in between the walls. The effluent is made to pass parallel to the inclined plates in the vertical upward passage at pre-determined velocity. This results in settling of the suspended solids, which slide along the plates, down to the bottom of the settler.
• Ventilation : Pollution control is one of the most important aspects of metal finishing processes, many of which contain corrosive chemicals. Air pollution can be controlled by not only evacuation but also by washing of fumes, the former through an exhaust fan and the latter through scrubbers. Whenever fumes of neutralizing nature are combined, scrubbing may not be essential.  
• Exhaust Fan : The body of the centrifugal exhaust fan is made up of mild steel, internally lined with suitable anti-corrosive material. The impeller is made up of stainless steel and is dynamically balanced. Standard operating pressure is 62 mm wg.

Technical Information

• CFMHP   

• 2500 cfm5
• 5000 cfm7.5
• 7500 cfm10
• 10000 cfm15   
• 15000 cfm25

We provide reliable and efficient services for various industrial FRP Fabrication works in New Delhi. Our team of experienced engineers is dedicatedly involved in providing accurate solutions for FRP Fabrication work. Being a quality oriented firm, we ensure client satisfaction at any cost. We are highly appreciated for our time-definite Services. Different conditions such as thickness, temperature and pressure are ascertained by our team for providing the best FRP Fabrication services to the clients. We render the Services at competitive rates.

Designed using advanced technology; our Electroplating Automation Systems are of immaculate quality. Our company shares glorious credentials with the proficient Manufacturers and Suppliers of Electroplating Automation System in New Delhi. The Electroplating Automation Systems increases production under optimum conditions with reduction in production of bottlenecks. To cater bulk and urgent requirements of buyers, we maintain a large stock of Automation Systems at our state-of-the-art warehouses under optimum conditions.

Details

• Reduction in chemical costs.
• Reduction in labor and operational costs.
• Elimination of human error.
• Regulated inputs.
• Reduction in inspection.
• Maintenance of operating efficiency.
• Effective control of production.

Titanium baskets replace the use of anodes in the shapes of plates, rods etc; and therefore the use of primary anodes save operating costs considerably. It is widely used in nickel plating because of its excellent properties such as high corrosion resistance and wear resistance.  The company is a reputed Manufacturer and Supplier of Titanium Anode Baskets in New Delhi. The Titanium Anode Baskets are fabricated from expanded metals of 1 mm thickness, diamond mesh, stiffened with sheets of 1 mm thickness as required.

Details

• High strength to weight ratio, allowing it to carry large weights without distortion
• Provides constant anode area hence enabling constant current density

Available Sizes

• 150 x 50 x 300 mm       
• 150 x 50 x 450 mm 

Based on latest technology, our Electroplating Dacrotizing are of immaculate quality. The company has cemented its presence among the renowned Manufacturers and Suppliers of Electroplating Dacrotizing in New Delhi. The Electroplating Dacrotizing we deal in are manufactured in adherence with international quality standards and norms. Dacrotizing produces a coat of Zinc-aluminum flakes in a trivalent chrome polymer matrix in an aqueous media by drip process. Buyers can obtain the Electroplating Dacrotizing at nominal rates.


The high efficiency of corrosion protection is due to combination of :

• Controlled (Sacrifical) Galvanic protection by zinc.
• Passivation by chrome.
• Barrier effect of metal particles and the matrix.

Backed by our dedicated professionals, we have emerged as a reliable Manufacturer and Supplier of Electroplating Phosphatings in New Delhi. The Electroplating Phosphatings are known to provide protection against atmospheric corrosion. The different steps involved in Electroplating Phosphatings include degresing, rinsing, water dip, pickling, rinsing and water dip. Electroplating Phosphatings can be used as efficient lubricant carrier to provide resistance to wear, fretting, galling, scuffing and to aid running-in on rotating and sliding surfaces.

Phosphate Coatings

• Can be used as efficient lubricant carriers to provide resistance to wear, fretting, galling, scuffing and to aid running-in on rotating and sliding surfaces.
• Can act either on their own or by carrying a suitable lubricant as a production aid in cold metal working operations such as cold forming, wire drawing, impact extruding etc.
• Have a wide field of application in manufacturing industry, both as an aid to mechanical production operations and in surface finishing.
• On metal consist of layers of crystalline, water insoluble metal phosphates of varied crystal size depending on the type of phosphate bath used, the kind of metal to be coated and the characteristics of the metal surface.

A typical process sequence is :

• Degresing – Rinsing – Water dip

• Pickling – Rinsing – water dip

Electroplating Transport Wagons provide the means for mechanized movements of workloads in a plating system.  We are an eminent Manufacturer and Supplier of Electroplating Transport Wagons in New Delhi.  The Electroplating Transport Wagons run on guided tracks, enabling vertical as, well, as horizontal movement.  To ensure that only defect free Electroplating Transport Wagons reach the buyers, we carry out strict quality checks before the final dispatch. Buyers can obtain the Wagons at market-leading rates.

The following configurations are available based on layout / space availability

• Straight line - with load / unload on opposite sides
• Straight line - with load / unload on same side
• Parallel lines - with tank traverse cross transport wagon
• Parallel lines - with over head traverse cross transport wagon
• Parallel lines - with random movement of transport wagon    

Features :

• Operation: Manual / Semi-automatic / Fully-automatic / Programmable through P.L.C.

Robust Design.

• Frame – M.S., epoxy or powder-coated, alternatively SS 304 construction.
• High efficiency geared motor with brake, provided with thermistor suitable for continuous duty cycle with higher safety factor as per international standards.
• Speed – Hoisting – up to 22 metere per minute.
• Traverse – up to 45 meters per minute.

Step-less speed regulation through Frequency Inverter.

• Lifting / Lowering by means of chains / Polypropylene belt.
• Rollers and sliders of ‘RCH – 1000' material (corrosion free).
• Wheel: Suitable for corrosive atmosphere and anti-skidding function for traverse movement.
• Horizontal and vertical movement transmissions by means of direct gears.
• ASI cable system – Reduces number of cables.
• Combination of proximity and limit switches for enhanced level of safety and reliability.

Additional Features :

• Component tilting mechanism on lifting carriage for quicker dripping from pocket / tubular type components.
• Drip tray arrangement for collecting the drain solution from rotating barrels / racks.

Technical Information

• Types Of Transport Wagons
• TypeSpanPay Load
• KMC Mini Transporter1.0 m50 kg
• 0.6 in 2 close columns50 kg
• KMC-PC(Printed Circuit Boards)3.0 m50 kg
• KMC-CU(Canatilever Type)1.2 m150 kg
• KMC-CO(Canatilever Type)1.2 m150 kg
• KMC-DT(Dedicated For Rim)2.2 m1000 kg
• KMC-DS(Skid Mounted)3.0 m1000 kg
• KMC-DC (Cieling Supported)3.0 m1000 kg
• KMC-DP (Portal Suport)13.0 m x5000 kg
• KMC-QD (Quadrilateral Lift Support)13.0 m1500 kg

The company is a prominent Manufacturer and Supplier of Electroplating Eductor in New Delhi. The Electroplating Eductor we make available is manufactured using advanced technology in conformity with international quality standards. To ensure that only defect free Electroplating Eductor reaches the buyers, we carry out strict quality tests based on parameters like dimensional accuracy, durability and corrosion resistance, etc. We are capable of delivering bulk orders of the Electroplating Eductor.

Benefits

• Reduces air borne fume emissions by 90%.
• Saves heating costs up to 25%.
• Reduces brightener consumption 20%.
• Saves metal as a result of more uniform brightness and thickness distribution.
• Improves throw and deposit thickness in blind holes and recesses.
• Permits increased current density, especially compared to cathode rod agitation for faster plating    rate.
• Reduces carbonates in alkaline processes.
• Reduces or eliminates gas-pitting.

Owing to our rich industrial experience, we have emerged as a leading Manufacturer and Supplier of Electroplating Barrels in New Delhi. The Electroplating Barrels we make available are manufactured in conformity with international quality standards and norms. The entire range of the Electroplating Barrels is quality tested on several parameters before the final dispatch. Bulk orders of the Electroplating Barrels are delivered by us within allocated time.

Additional Features

• Auto lid opening / closing : Can be provided at loading / unloading station.
• Drip tray : This novel arrangement helps in reduction of carry-over of solution at each station, by directly placing a pneumatically operated or rack and pinion type tray below the barrel, while it is being lifted out of a tank. The collected solution is then drained into a pipe manifold and sent directly to the ETP.
• This substantially reduces the contamination at each station by over 15%.
• Drip accelerator : This design feature helps in a faster drip of the solution from the barrel, thus reducing the drip time at each station and at the same time decreasing the carry-over of solution by over 30%.
• Unloading chute : This is a funnel shaped flat chute made of PP / SS which allows for easier unloading of components onto a basket from the barrel.
• Reversible direction of rotation : By reversing the rotation of the barrel after lifting, the components are made to tumble with greater efficiency, thus increasing the flow of the drip. This results in reduced carry-over at each rotation station as well as during traversing.
• Fume Exhauster : Provided on transport wagons for exhausting fumes emanating from the barrel
• Direct drive / Chain drive : Such drive mechanisms are designed, depending on the operational requirements.

Technical Information :

• Plating
  • View ImageKmc (BRL-P 1)PP3 to 4300L x 150 A/FHexagonal
  • Kmc (BRL-P 2)PP5 to 6300L x 200 A/FHexagonal
  • Kmc (BRL-P 3)PP12 to 15450L x 250 A/FHexagonal
  • Kmc (BRL -S1)SS25 to 100 Hexagonal / Round

• Phosphating
  • View ImageKmc(BRL-S 2) 25 to 100 Round

• Fixed Type
  • View ImageKmc (BRL-ACR)Acrylic/pp1/2 to 3/4175L X 100A/FHexagonal
  • (Manual)Kmc (BRL –SC1)PP12 to 15450L X 250A/FHexagonal
  • Kmc (BRL –SC2)PP30 to 40730L X 300A/FHexagonal.