Soil Pipes & Fittings (IS 3989) “Kapilansh” the name that has become synonymous with Centrifugally Cast Pressure Pipes in India, offers Centrifugally Cast (Spun) Iron Spigot and Socket Soil, Waste, Ventilating and Rain Water Pipes, fittings & Accessories confirming to IS: 3989:2009 for all your Drainage System needs i.e. • Soil & Waste Discharge System • Rain Water System • Ventilation System “Kapilansh” with their expertise in manufacturing Cast Iron Pressure Pipes, utilized “De Lavaud Process” for manufacturing “Kapilansh Centrifugal” Pipes. The superior Quality Assurance and control measures ensure you get only the best piping for the drainage system.    Assured quality as per specification. • Superior corrosion resistance to soil, waste water & chemicals. • Also superior Atmospheric weathering & corrosion resistance. • Low thermal expansion. • High compressive strength & beam load bearing capacity. • Smooth inner surfaces giving better flow characteristics. • Environment friendly as fully recyclable. • Better Aesthetic look. • Engineered for Skyscrapers.

We have a recently forayed into manufacturing of ductile iron manhole covers Gratings & Frames. These are manufactured as per BS EN-124 standard and are safe because of high strength and low weight. They have frames for better security and anti-skid checkered designs for total safety. Our manhole covers and gratings can bear heavy duty traffic, have keyholes for easy lifting and larger open area for water drainage. Additionally as per your requirements we can include locking arrangements too. If new patterns are to be developed we can do that in 6 weeks. Your logo can also be imprinted on these products.

Classification Pipes have been classified in this standard as LA, A and B according to their thickness. Class LA pipes have been taken as basis for evolving the series of pipes. Class A allows a 10 percent increase in thickness over Class LA. Class B allows a 20 percent increase in thickness over Class LA. For Special uses, Classes C, D, or E may be derived after allowing corresponding increases of thickness of 30, 40 or 50 percent respectively.   Pressure Pipes Special Aspects • Ability to withstand high pressure. • Inherent toughness. • Resistant to Corrosion. • Non-Absorbant. • Higher Tensile Strength. • Firm & easy jointing. • Easy Machineability. • Easy Handling & Laying. • Low Maintenance Cost.   Pressure Pipes Testing at Works Mechanical Test – Mechanical tests shall be carried out, during manufacture. Tests for every four hours of production shall be conducted. The results obtained shall be taken to represent all the pipes of all sizes made during that period.

1. Protection of Electrical System from Overload Current. 2. Provide least resistance path to Leakage / Stray / Overload Current between the    System and Earth. 3. Protect human life from getting electrocuted. 4. Give least resistance path to the Lightening to pass to ground. 5. With the support of Soil (Earth) if not suitable then it is made suitable by    reconditioning with Back Fill Compound and Cover with Earth Pit Cover. To prevent contamination at earth pit top. We are a leading manufacturer of Treated Earthing System made by Centrifugal Casting Process including attachments like single flange, hot dip galvanized clamp, Cast Iron Funnel with casted mesh, alternate hole & taper cut along with accessories like “KapitrodeTM” “Back Fill Compound and Earth Pit Covers” in various sizes as per drawing specification for grounding Electrical Systems. Our capability has been assessed by the various contractors, corporate and Electricity boards. We are regularly supplying to Power Generation, Transmission & Distribution companies i.e MSETCL, GETCO, KPTCL, MPPTCL, UGVCL, MSPGCL etc, Industries i.e. Chemical, Cement, Mining, Petroleum – Refineries & Outlets, Pharma, Steel, Sugar, Textile etc, Solar Energy, Winds Energy & Bio Energy Plants, Projects i.e. Civic Structure, Commercial & Residential from last Two decades. Advantages / Benefits of using Cast Iron Earthing System - “Kapitrode ®  ” • High surface area of contact • Durable and Reliable • Corrosion Resistance  • Excellent Connectivity & Conductivity • Uniform Current Dissipation • Easy Installation • Environmental Friendly • Cost Effective  

Soil Pipes & Fittings (IS 3989) “Kapilansh” the name that has become synonymous with Centrifugally Cast Pressure Pipes in India, offers Centrifugally Cast (Spun) Iron Spigot and Socket Soil, Waste, Ventilating and Rain Water Pipes, fittings & Accessories confirming to IS: 3989:2009 for all your Drainage System needs i.e. • Soil & Waste Discharge System • Rain Water System • Ventilation System “Kapilansh” with their expertise in manufacturing Cast Iron Pressure Pipes, utilized “De Lavaud Process” for manufacturing “Kapilansh Centrifugal” Pipes. The superior Quality Assurance and control measures ensure you get only the best piping for the drainage system.    Assured quality as per specification. • Superior corrosion resistance to soil, waste water & chemicals. • Also superior Atmospheric weathering & corrosion resistance. • Low thermal expansion. • High compressive strength & beam load bearing capacity. • Smooth inner surfaces giving better flow characteristics. • Environment friendly as fully recyclable. • Better Aesthetic look. • Engineered for Skyscrapers.

We have a recently forayed into manufacturing of ductile iron manhole covers Gratings & Frames. These are manufactured as per BS EN-124 standard and are safe because of high strength and low weight. They have frames for better security and anti-skid checkered designs for total safety. Our manhole covers and gratings can bear heavy duty traffic, have keyholes for easy lifting and larger open area for water drainage. Additionally as per your requirements we can include locking arrangements too. If new patterns are to be developed we can do that in 6 weeks. Your logo can also be imprinted on these products.

Classification Pipes have been classified in this standard as LA, A and B according to their thickness. Class LA pipes have been taken as basis for evolving the series of pipes. Class A allows a 10 percent increase in thickness over Class LA. Class B allows a 20 percent increase in thickness over Class LA. For Special uses, Classes C, D, or E may be derived after allowing corresponding increases of thickness of 30, 40 or 50 percent respectively.   Pressure Pipes Special Aspects • Ability to withstand high pressure. • Inherent toughness. • Resistant to Corrosion. • Non-Absorbant. • Higher Tensile Strength. • Firm & easy jointing. • Easy Machineability. • Easy Handling & Laying. • Low Maintenance Cost.   Pressure Pipes Testing at Works Mechanical Test – Mechanical tests shall be carried out, during manufacture. Tests for every four hours of production shall be conducted. The results obtained shall be taken to represent all the pipes of all sizes made during that period.

1. Protection of Electrical System from Overload Current. 2. Provide least resistance path to Leakage / Stray / Overload Current between the    System and Earth. 3. Protect human life from getting electrocuted. 4. Give least resistance path to the Lightening to pass to ground. 5. With the support of Soil (Earth) if not suitable then it is made suitable by    reconditioning with Back Fill Compound and Cover with Earth Pit Cover. To prevent contamination at earth pit top. We are a leading manufacturer of Treated Earthing System made by Centrifugal Casting Process including attachments like single flange, hot dip galvanized clamp, Cast Iron Funnel with casted mesh, alternate hole & taper cut along with accessories like “KapitrodeTM” “Back Fill Compound and Earth Pit Covers” in various sizes as per drawing specification for grounding Electrical Systems. Our capability has been assessed by the various contractors, corporate and Electricity boards. We are regularly supplying to Power Generation, Transmission & Distribution companies i.e MSETCL, GETCO, KPTCL, MPPTCL, UGVCL, MSPGCL etc, Industries i.e. Chemical, Cement, Mining, Petroleum – Refineries & Outlets, Pharma, Steel, Sugar, Textile etc, Solar Energy, Winds Energy & Bio Energy Plants, Projects i.e. Civic Structure, Commercial & Residential from last Two decades. Advantages / Benefits of using Cast Iron Earthing System - “Kapitrode ®  ” • High surface area of contact • Durable and Reliable • Corrosion Resistance  • Excellent Connectivity & Conductivity • Uniform Current Dissipation • Easy Installation • Environmental Friendly • Cost Effective