Product / Services
Post Buy Requirement

My ExportersIndia

For Buyer

For Seller

For Help

KE

Kartar Engineering Works india Pvt. Ltd.
location New Rohtak Road, Delhi

Write a Review
Call Now Call Now

Our Products

  1. Laboratory Apparatus 17 Products available
  2. Testing Equipment 15 Products available
  3. Industrial Machinery 11 Products available
  4. Jigs, Casting Dies, Die Casting Moulds & Moulding Tools 8 Products available
  5. Measuring Instruments & Equipment 4 Products available

  6. Measurement Gauges & Fittings

    2 Products available

  7. Grinders, Drills & Power Tools

    2 Products available

  8. Tables

    2 Products available

  9. Construction Machinery & Equipment

    2 Products available

  10. Autoclaves

    2 Products available
  11. Others Products 24 Products available

Our Products

Our offered Product range includes Vibrating Machine Digital, Digital Rock Shear, Rock Bolt Pull out Test, Devel Abrasion Machine and Automatic Bituminous Compactor.

Concrete Test Hammer

Concrete Test Hammer
kEWIL Concrete Test HammerUseful for non-destructive estimation of quality of concrete of a finished structure and its relative compressive strength. The instrument consists of a casing in which a hammer mass, special spring, hammer locking and release mechanism are housed. A spherical ended plunger projects at one end which, when pressed against the test surface, actuates the release mechanism of the hammer mass. It gives an impact on the plunger. The hammer mass rebounds after the impact and an indicator registers the amount of rebound on a linear scale. The compressive strength of the material can be computed from the calibration diagram supplied with each hammer. It gives results within +15% of actual compressive compressive strength.
View Complete Details
Ask Latest Price & Details
Wire Torsion Testing Machine

Wire Torsion Testing Machine
KEWIL Tensile Testing MachineTensile Testing Machines for universal application, in substantial two column construction, especially designed for metallurgical and research laboratories.
View Complete Details
Ask Latest Price & Details
Paving Equipment

Paving Equipment
KEWIL Ring and Ball ApparatusRing and ball apparatus is meant for determining soft point of bitumen. Using various scientific principles it is also used in petroleum industry, construction projects, paint industry etc. The ring & ball apparatus is used to determine the temperature at which a sample of bituminous material loaded by a steel ball of 9.5 mm diameter, drops a specified distance when heated under specified conditions. It is used to determine softening point of bitume
View Complete Details
Ask Latest Price & Details
Automatic Marshall Compactor

Automatic Marshall Compactor
KEWIL Ring and Ball ApparatusRing and ball apparatus is meant for determining soft point of bitumen. Using various scientific principles it is also used in petroleum industry, construction projects, paint industry etc.
View Complete Details
Ask Latest Price & Details
Cement Autoclave

Cement Autoclave
KEWIL Blain Air Permeability Apparatus IS : 4031, IS : 5516, BS : 4359 Part-IIThe apparatus comprises one each of permeability Cell U tube manometer with stop cock mounted on a laminated wooden stand, perforated metal disc, plunger, Rubber, Stopper, Rubber tube with rubber bulb.
View Complete Details
Ask Latest Price & Details
Laboratory Cement Autoclave

Laboratory Cement Autoclave
The apparatus comprises one each of permeability Cell U tube manometer with stop cock mounted on a laminated wooden stand, perforated metal disc, plunger, Rubber, Stopper, Rubber tube with rubber bulb. Spares :a) Laminated wooden stand with U tube monometer with stop cock.b) Permeability Cell complete with perforated metal disc, non -perforated disc and plunger.
View Complete Details
Ask Latest Price & Details
Bitumen Extractor

Bitumen Extractor
Drilling machines are cutting tools used to create cylindrical holes. They are also called drill bits. Bits are held in a tool called a drill, which rotates them and provides axial force to create the hole. They are suitable for taking out cylindrical cores upto diameter of 6" (150mm) x 12" (300mm) high from rocks, concrete blocks or air craft runway slabs.
View Complete Details
Ask Latest Price & Details
Centrifuge Extractor

Centrifuge Extractor
KEWIL Ring and Ball ApparatusRing and ball apparatus is meant for determining soft point of bitumen. Using various scientific principles it is also used in petroleum industry, construction projects, paint industry etc.
View Complete Details
Ask Latest Price & Details
Tile Abrasion Testing Machine

Tile Abrasion Testing Machine
  • ACCESSORIES Thickness Measurement Jig with 0.01 mm x 25 mm dial gauge.
It is used for determining the resistance of flooring tiles to wear or abrasion.It consists of the following :-i) A grinding disc furnished with a replaceable grinding path and rotating horizontally about its vertical axis.ii) A circular tray enclosingthe grindingdisc.iii) Holding device for test specimen.iv) Reduction gear coupled to a motor for operation on 220 v, 50 Hz, single phase supply.v) Revolution counter. (Preset cumulative).
View Complete Details
Ask Latest Price & Details
Cylindrical Measures

Cylindrical Measures
Cylindrical measures are used to determine unit weight of concrete or fine, coarse and mixed aggregates, as well as for void content of aggregates. These measures are immune to cement paste and can also be used for unit weight and yield of fresh concrete. It also indicates the angularity, spherical nature and workability of fine aggregate in a mixture.Cylindrical measures are calibrated and provided with handles.Consists of three measures, one each of 3 litres capacity, 15 litres capacity and 30 litres capacity.Provided with a tamping rod which has 16 mm dia and is 600 mm long. One of the ends of the rod is rounded.
View Complete Details
Ask Latest Price & Details
Jaw Crushers

Jaw Crushers
  • Components Crusher Frame, Pitman, Anti-friction Bearings
Jaw crushers are primary crushers used for the processing of hard feedstocks, such as rock and concrete. This is made possible with the help of a pair of vertical jaws lined with replaceable manganese steel plates. One jaw is fixed and the other moves back and forth.The jaws of the crusher are made of manganese steel.The opening of the jaws is adjustable from 20 mm to 6 mm and its capacity is 200 kilograms per hour.The crusher is provided with a hopper at the top for pouring materials.The equipment is supplied with 3 HP electric motor, triple V-belt pulley type and mounting frame.
View Complete Details
Ask Latest Price & Details
Length Gauge

Length Gauge
  • Applications Cement & Concrete Industry, Soil Analysis, Ceramic Industry
The instrument consists of a steel plate on which eight steel pins are vertically mounted with specified distance in between.Aggregate, which has to be classified is parted into 7 sieve fractions from 63 to 6.3 mm and each part is examined separately.
View Complete Details
Ask Latest Price & Details
Riffle Sample Dividers

Riffle Sample Dividers
Riffle sample dividers are used for the easy dividing and reduction of bulk material samples with particle sizes ranging from less than 1 mm up to a maximum of 10 mm. This equipment is mainly used for sampling aggregates, cement, ores, refractory materials, pigments, soap, powdered coal etc. It is also used for rapid collection of true representative sample from aggregates, sand and fillers.It is fitted with a series of channels or slots of equal width that discharge the material alternatively in opposite directions into separate pans.
View Complete Details
Ask Latest Price & Details
Thickness Gauge

Thickness Gauge
  • Applications Soil Study, Ceramic Industry
Thickness Gauge, also known as Flakiness Index is an instrument used to select samples from aggregates, sand and fillers. They can also be used to determine the flakiness index of aggregates.This type of gauge has 7 labeled slots for rapid hand trying of particles from each of the slots.Flakiness index refers to the mass of all flaky particles, passing appropriate slots, as percent of the sample.
View Complete Details
Ask Latest Price & Details
Drilling Machines

Drilling Machines
  • diameter 6" (150mm) x 12" (300mm) high from rocks
Drilling machines are cutting tools used to create cylindrical holes. They are also called drill bits. Bits are held in a tool called a drill, which rotates them and provides axial force to create the hole. They are suitable for taking out cylindrical cores upto diameter of 6" (150mm) x 12" (300mm) high from rocks, concrete blocks or air craft runway slabs.
View Complete Details
Ask Latest Price & Details
Asphalt & Concrete Floor Saw

Asphalt & Concrete Floor Saw
  • Applications Floor sawing, Pile cutting, Bridge work
The engine of the asphalt & concrete floor saw is driven by diesel, petrol or kerosene.It has a diamond wheel of diameter 300 mm, which is suitable for cutting upto depth of 110 mm and is supplied with standard outfit.The engine is attached to a trolley, which has a water tank that supplies water to the cutting blade to keep it cool during cutting operation.
View Complete Details
Ask Latest Price & Details
Flow Table

Flow Table
  • ACCESSORIES Flow Mould
it is used for determining the workability of building lime.It comprises :i) One 300 mm dia polished steel table with three engraved circles of 70 mm, 110 mm and 190 mm dia at the top face.ii) A frame having a horizontal shaft carrying a cam on one side and a wheel on the other, adjusted to raise the table by 12.5 mm and allow it to fall freely.iii) Truncated conical mould 65 mm inside dia at the bottom, 40 mm inside dia at top and 90 mm high.
View Complete Details
Ask Latest Price & Details
Laboratory Concrete Mixer

Laboratory Concrete Mixer
Our concrete mixer is a motorized concrete mixer of laboratory type. These mixers are electrically operated and are designed so that the tedious job of hand mixing concrete can be eliminated. The mixer is highly useful in creating uniform mix of concrete. Our laboratory concrete mixers are suitable for operation on 220 230 volts A.C. single phase. Following are some essentials of our product:The total drum volume is however 3 cu.ft. mounted on a well built stand with rubber tyres, the drum is mounted for end discharge and equipped with end towing pole.
View Complete Details
Ask Latest Price & Details
Vibrating Machine

Vibrating Machine
  • Accessories ii) Set of Springs. iii) KEW Cube Mould 70.6MM (I.S.I. Marked)
The machine is used for compaction of 70.6mm cube specimens of cement mortar under standard vibration required for determination of compressive strength of cement. The vibration machine consists of a frame mounted on four coiled springs to carry a cube mould and an eccentric revolving shaft mounted in ball and roller bearings. The machine is so balanced that the eccentric imparts simple harmonic motion to mould carrier and the mould. The frequency of vibration is 12000 400 R.P.M. per minute. The drive from the motor to the eccentric shaft is through an endless flat belt running on crowned pulleys. Suitable for operation on 220 V, 50 Hz, single phase power supply.
View Complete Details
Ask Latest Price & Details
Vibrating Machine Digital

Vibrating Machine Digital
  • ACCESSORIES i) Flat Belts ii) Set of Springs.
The machine is used for compaction of 70.6mm cube specimens of cement mortar under standard vibration required for determination of compressive strength of cement. The vibration machine consists of a frame mounted on four coiled springs to carry a cube mould and an eccentric revolving shaft mounted in ball and roller bearings. The machine is so balanced that the eccentric imparts simple harmonic motion to mould carrier and the mould. The frequency of vibration is 12000 400 R.P.M. per minute. The drive from the motor to the eccentric shaft is through an endless flat belt running on crowned pulleys. Suitable for operation on 220 V, 50 Hz, single phase power supply.
View Complete Details
Ask Latest Price & Details
Concrete Vibrators

Concrete Vibrators
KEWIL CON-VIBRA Series concrete vibrators [Needle Vibrators] are the finest of their types available. Their rugged construction and extreme simplicity makes it possible to operate them with ease and complete dependability. These Needle Vibrators are designed to suit all types of site conditions. Their superior design and longer life eliminate old fashioned arduous method of compaction. Flexible Shaft: The flexible shaft is manufactured as per I.S.S. 627671 standards. The inner core consists of high tensile spring wires as per I.S.S. 445475 standards. The rubber outer casing is rugged enough to negotiate varied climatic conditions and has a wear resistant spring steel liner which guarantees a longer life and maximum transmission efficiency.
View Complete Details
Ask Latest Price & Details
CON-VIBRA Concrete Vibrator

CON-VIBRA Concrete Vibrator
  • Sizes • 40 mm Vibrating needle with 6m long rubber shaft , • 60 mm Vibrating needle with 6m long rubber shaft
Electric vibrator with 2HP single phase motor designed for high frequency of 17000 vibmin to ensures perfect homogeneous compaction of concrete with push button starter, suitable for 25mm, 40mm, 50mm & 60mm needle. The needle vibrators powered by Villiers Engines are hard workings reliable. The superior design and longer life eliminate old fashioned arduous method of compaction.
View Complete Details
Ask Latest Price & Details
Vibrating Table

Vibrating Table
Proper compaction of cement and concrete while casting specimens for compressive or flexural strength testing essential to achieve a better and more consistent mixture. The cement and concrete vibrating table top has stops along its edges to prevent moulds from sliding off the table during operation. The maximum load capacity is 140 kg. The concrete vibrating tables are offered in 3 different table top sizes:
View Complete Details
Ask Latest Price & Details
STAINLESS STEEL CHAMBER

STAINLESS STEEL CHAMBER
  • Power 230 v, 50 hz, Single phase
  • Dimension 15 cm dia meter x 40.5 cm height
The Autoclave is suitable for conducting accelerated soundness test on cements or the autoclave expansion test requiring constant steam pressure with the correspondent constant pressure. It is consists of a stainless steel cylinder with a welded heat insulated voer, mounted on a sturdy supporting frame, enclosed in a heat insulated metel housing, attractively finished. The attached control unit encloses sensitive pressure regulator and pressure gauge, power switches and pilot lights for controlling the electric heating units inside Chamber Dimension-15 cm dia meter x 40.5 cm height suitable for operation on 230 v, 50 hz, Single phase, A.C. supply. Supplied complete with test bar holder Special rack to hold specimens above water level in the autoclave and in vertical position to expose them in the same manner.
View Complete Details
Ask Latest Price & Details
Digital Rock Shear

Digital Rock Shear
  • sizes 300 mm x 300 mm x 450 mm
We offer digital rock shear, which comprises of two controllers, hydraulic power pack with tandem pump to feed two actuators. These are available in the sizes of 300 mm x 300 mm x 450 mm, which can contain maximum rock specimens of 300 x 300 x 150 mm that are naturally or artificially jointed in any shape and form. Further, the parameters like normal load and shearing load on strain basis or stress basis are controlled through the computer. In addition, on line graphical presentation is shown on the monitor. Moreover, after completion of the tests.
View Complete Details
Ask Latest Price & Details
Rock Bolt Pull Out Test

Rock Bolt Pull Out Test
  • capacity 500kN
We offer rock bolt pull out test, which are made as per the B.I.S. 11309, ASTM D4435, ISRM standards. These are used to measure the working and ultimate capacities of rock bolt anchors. Further, our products comprises of a central hole jack, hand pump with load gauge, directional control valve and only for central hole jacks above the capacity of 500kN, flexible pipes, truss high tensile test rod with coupling. Moreover, the load cell can be used for the measuring of pull out load and arrangement is provided for fixing dial gauge for estimating deflection against the load. In addition to this, we provide different size of adopters with the high tensile test rod.
View Complete Details
Ask Latest Price & Details
Core Drilling Machine

Core Drilling Machine
  • Rated Power 4.8 H.P.
  • diameter 150 mm
Our range of core drilling machines are of light weight, versatile and easy to operate. These are designed with a tubular frame mounted on two pneumatic tyres. In addition to this, we also provide a hook in the front side of the frame to be towed behind a jeep and the tyres have been so placed that the total machine is balanced. Further, the main gear box gives a manual feed of 600 mm can be rotated in any direction that is 0-360o for a convenient angle of drilling. It is powered by 4.8 H.P. diesel engine and suitable for taking cores up to the diameter of 150 mm and depth more than 4-5 meters with help of extension rods and bits.
View Complete Details
Ask Latest Price & Details
Test Sieves

Test Sieves
  • Purity smooth nesting on each others and also with lid and receivers.
Test Sieves are available in one piece frame of 8" diameter with suitable lid and receiver. Its frame is made up of spun brass and without any joint in it. It has clean rigid design of minimum weight and free from corners where the material could be lodged. An essential feature of test sieves is that the mesh should be flat, taut and uniform and with permanent tension round the whole circumference. Uniform fabrications of the sieves permit easy and smooth nesting on each others and also with lid and receivers. Imported stainless steel 188 quality or Phosphor Bronze standard sieve cloth is used for better and lasting performance.
View Complete Details
Ask Latest Price & Details
Sieve Shaker

Sieve Shaker
  • diameter 150mm or 200mm
Our hand operated range of sieve shaker are light in weight, portable and suitable for bench mounting. These are incorporated with a heavy fly wheel, which ensures smooth operation. Further, our range is offered at industry leading prices. Carries upto 7 sieves of 150mm or 200mm diameter. The shaker is driven by a h.p (motor through a reduction a reduction gear immersed in oil. The sieve table does not rotate but is inclined from the vertical axis and the direction of inclination changes progressively in clockwise direction. If the stop-pin below the table is removed, the shaker can have a rotary motion. In addition to this gyaratory motion of the table, there is an upward and downward movement ensuring that each square cm of the sieve is utilized. a pair of rods and holder are supplied. The holder can be fixed on the top of the upper most sieves and thus the sieve set is firmly held. Suitable for operation on 230 Volts, 50 cycles single phase, A.C. Supply.
View Complete Details
Ask Latest Price & Details
Pycnometer

Pycnometer
  • feature Simple in operation.
Pycnometer as per the Ref Std :IS 2386. These are accurate and quick in its functionality. This instrument enables the density of a fluid to be measured accurately.
View Complete Details
Ask Latest Price & Details
Spring Testing Machine

Spring Testing Machine
  • length 8", 6"
  • diameter 4", 1/2"
Spring Testing Machine enable load deflection tests of tension and compression springs to be carried out accurately and quickly. The Cabinet contains the hydraulic unit the hand wheel of the pump and the release valve handle are outside the cabinet for easy operation. This compact base carrier two fixed upright and four horizontal plates. The first and the third plates with two small uprights from an adjustable frame. The second and the fourth plates are fixed. A square threaded wheel arrangements provided for adjusting the height of the springs.
View Complete Details
Ask Latest Price & Details
Tell Us What are you looking for? Will call you back

Contact Us

View Contact No.