The CE6000 series sets the standard for high performance, low cost cutting plotters. It is equipped with professional-level features such as registration mark sensing and perforation cutting for producing a dividing line of labels or packaging mock-ups. The advanced features of the CE6000 series improve your work efficiency and increases productivity.

Specifications :

• Worlds quickest splicing 7sec. / tube-heating 14sec.


• Minimal manual operation. Splice in 4 steps.


• Multi-functional carrying case with integrated work station.


• Absolute robustness.

The HJS-02 is designed for stripping of fiber ribbon with up to 12 fibers all together. In order to achieve this, the HJS-02 is equipped with a heater, which soften the coating of the fiber ribbon for smooth stripping.

Specifications:

• Approx. 3 sec. at normal mode, Approx. 8 sec. at power saving mode


• 12 V DC from Fujikura splicer with DC power cord 85 to 265 V AC with optional AC adapter


• By FH-50 series Fiber Holder, except FH-50-250 and FH-50-900


• 107W x 40D x 29H mm, 195g

Providing typical cleave angles of 0.5 degrees, the CT-30A is simple to use and provides consistantly good results. The blade has 16 positions which allows 48, 000 operations before replacement.

Specifications:

• Small size, lightweight, and easy handling


• Applicable up to 12-fibre ribbon cleaving


• Fibre collector equipped as standard


• 2-action operation including fibre scrap collection

Entry-level Ethernet test solution for up to 1G electrical/optical Ethernet interfaces with VLAN, Q-in-Q tags, or MPLS labels and verification of Carrier Ethernet SLAs.

Specifications :

• Electrical and optical testing in one convenient package


• Line rate traffic generation and Layer 2 and Layer 3 .


• RFC 2544 for throughput verification and line qualification .


• LED lights for quick verification .


• Electrical cable diagnostic tests checks cable length, type, and displays type of fault and distance .


• Cable diagnostics to determine if cable is straight-through/crossover .


• Optical power level measurements to verify fiber connectivity .

The FLS-300 Light Source is part of EXFOs new line of handheld units, which includes the FPM-300 Power Meter and the FOT-300 Optical Loss Test Set.

Specifications :

• Multifunctional light source: up to three singlemode wavelengths on a single port, 4 ports


• Power autonomy of 120 hours.


• Highest output power in the industry.


• Ergonomic, eye-catching handheld package.

The FuseConnect is designed to work with an industry standard cleaver and splicers utilising a fibre holder system. The simplified field installation process minimizes the potential for operator error and expensive connector scrap; even in difficult field environments or in exposed conditions at remote site locations.

Our latest fusion splicers are also pre-programmed for FuseConnect terminations further simplifying the assembly process.

Specifications :

• RF-overlay FTTP networks


• Cable TV backbone networks.


• Outside plant.


• FTTDesk.


• MDU FTTP Cabling


• Central office connector replacement.

The MAX-710B is the first tablet-inspired OTDR that is handy, lightweight and rugged enough for any outside plant environment.With a 7-inch, outdoor-enhanced touchscreen, the most efficient handheld display in the industry, it delivers an unprecedented userexperience.

Specifications :

• FTTx last-mile installation and troubleshooting.


• Short access network testing.


• FTTA-fi ber DAS installations.


• CATV/HFC network testing.

S

Multi-function hot-wire anemometer with detachable compatible probes

Kanomax Climomaster is the most accurate hot-wire anemometer of its kind.
It offers research-grade accuracy at an affordable, industry competitive price.
A high degree of accuracy is essential for applications such as cleanroom certifications, laminar flow measurements, and R&D product development.

The TOS5300 Series is a series of test instruments used in Hipot (withstanding voltage) tests and insulation resistance tests, two of the four tests regarded as necessary for ensuring the safety of electrical products. With an output of 5 kV/100 mA (AC) and 6 kV/10 mA (DC), the series can be used in Hipot (withstanding voltage) & insulation resistance testing of electronic equipment and electronic parts, based on the requirements of IEC, EN, UL, VDE, JIS, and other international safety standards and the Electrical Appliance and Material Safety Law.

Fibershot Smart series OTDR

PBZ Series

The Fiber Holder, FH-50 series is exclusively used for Fujikura FSM-60R, FSM-18R, SpliceMate, and former Fujikura ribbon fiber Splicers.

Fujikura Fiber Holder System is developed to provide appropriate splicing work for several kinds of fibers, single fibers or fiber ribbons.

The FH-50 series is supplied with a pair, for the left and the right respectively.

Specifications :

• Single to 12 fibers


• FSM-60R, FSM-18R, SpliceMate(FSM-11R), and former Fujikura Ribbon Fiber splicer

The FID-30R includes an optical power meter and succeeds the FID-25R while the FID-31R, the updated standard model, replaces the FID-26R. The fibre identifiers, used for identifying the light power presence in optical fibres, include three detecting functions: TONE, TRAFFIC, and ONU

Specifications:

• Worlds Highest Signal Detection Sensitivity


• ONU Signal Detection Function


• Trigger Lock Function


• 2.4" Colour Touchscreen with Backlight