The production of rotor blades is complemented with nose cone and nacelle cover mouldings, thereby providing a complete composites package for wind energy applications.

Kemrock moulds as standard include sophisticated computerized in built heating system, vacuum system with fixed vacuum lines, pneumatic system for accurate mould profile adjustment, all dedicated towards production by Vacuum Assisted Resin Infusion of Rotor Blades to suit todays current demands.

Kemrock has designed and developed composite modular buildings for use as schools, homes and emergency housing following natural disasters. The all-weather, insulated design comprises pultruded structural members, walls and floors, continuous laminate roof, SMC door and contact moulded furniture. They are an all composites solution flexible in size and design, offering superior quality corrosion resistant construction. Being made of composite materials, these modular houses are light weight and easy to install, taking 50-60% less time than traditional on-site constructions. These modular buildings are thermally insulated, lowering heating and cooling costs.

A recent kemrock development is a pultruded interlocking sound barrier, intended for use in built up areas where noise pollution is an ongoing problem. Manufactured as a hollow pulktruded profile, the panels can be filled with different media depending upon the degree to which noise absoption is required. Where partial visibility is required, combination installations using composites as the all important lower, noise absorbing area can be installed with polycarbonate upper panels providing the required transparency.

A recent development by the Kemrock design team, is a range of louvres that are intended for installation on top of buildings, cooling towers, in fact any structure where unsightly equipment needs to be hidden in an architecturally appealing way. There are various designs to cater for different situations.

This types of louvre features an architecturally appealing straight blade design with very smooth clean lines that visually complement any structures exterior styling. They are used in exhaust and low to medium velocity air intake applications. These louvres feature rear upstands that provide good protection against most weather conditions.

These louvres have specially designed sight proof chevron blades. These chevron blades provide privacy, conceal equipment, prevent vandalism and act a safety barrier in dangerous areas. In these louvres, intermediate support mullions do not interrupt blade exterior appearance. Sight proof louvres prevent vision through the blade whilst at the same time allowing the flow of air through them. These louvres are available in channel or optional flanged type and are available in different depths.

These louvres combine maximum weather protection at high airflow rates with good air performance and pleasing aesthetics. Standard construction features a drainable head design that collects and channels away water running down the building face, preventing it from entering the airstream. These louvres have a high degree of free area and low pressure drop. Blade and jamb seals are provided in order to provide tight closure in these types of louvers which are available in channel or optional flanged design in varying depths.

These types of louvres have a Kemrock blade design which imparts high structural strength and impact resistance to the installation, by way of an all composite frame. The Kemrock blade design complements any structure and enhances its architectural aesthetics. These louvres are used in moderate to low velocity air intake and exhaust applications. They have low pressure drop characteristics whilst resisting water penetration.

Developed for use in desert locations, Kemrock sandtrap louvres are installed and operate in a vertical plane. They allow airflow into installations whilst at the same time resisting the ingress dust and sand. Designed to give years of maintenance free performance, sandtrap louvres perform in the most extreme conditions.

The production of rotor blades is complemented with nose cone and nacelle cover mouldings, thereby providing a complete composites package for wind energy applications.

Rotor blade production is by resin infusion, manufactured to the highest international standards in moulds equipped with sophisticated in-built heating, a dedicated vacuum system and pneumatic controls for accurate mould profile alignment. We currently produce blades up to 45 metres in length, and blade root finishing is completed automatically with our blade root saw and drilling machines.
Kemrock blade manufacturing facility is temperature & humidity controlled
Tooling and rotor blades are made as per customer specific requirements.
Blades are tested for Static and fatigue load conditions.
State of the art painting facility to ensure surface finish quality compliances.
Highly qualified & experienced workforce to ensure stringent process build quality standards & compliances.
Experienced team in handling the blades and logistics.
Flexibility to expand at speed-up the blade manufacturing facility and resources.

The Winner in the Category of Telecom and Electronics at the recent ICERP 2011 exhibition in Mumbai was Kemrock for their all composite telecom tower. Designed in and fabricated from composites, the Kemrock Telecom Tower has been tested for its suitability at SERC Chennai, and survives wind speeds of 180kmph at a height of 30 metres.

Kemrock has designed and developed composite modular buildings for use as schools, homes and emergency housing following natural disasters. The all-weather, insulated design comprises pultruded structural members, walls and floors, continuous laminate roof, SMC door and contact moulded furniture. They are an all composites solution flexible in size and design, offering superior quality corrosion resistant construction. Being made of composite materials, these modular houses are light weight and easy to install, taking 50-60% less time than traditional on-site constructions. These modular buildings are thermally insulated, lowering heating and cooling costs.

Kemrock manufactures robust Industrial Cable Management Systems that require zero maintenance and present the best possible corrosion resistance. Highly insulated and extremely light in nature, our cable management systems have a longer life span than conventional materials, particularly in extreme conditions.

FEATURES :
Truly demountable & Flexible
Temporary or Permanent
Modular Approach
Aesthetically appealing
Cost Effective
Sustainable
Very low disruption factor
Potential for 30% capital allowance discount
Minimises the loss of customers and revenue during construction

Kemrock Handrail, Ladders and Access Systems offer long life, low maintenance solutions. Our Access Engineering Systems are lightweight and offer high resistance towards corrosion. Easy to fabricate, the installed cost of Kemrock Composite Handrails and Ladders is often lower than that of steel. Being a fibreglass reinforced composite, the handrails and ladders are thermally and electrically non conductive, offer excellent UV resistance and are extremely durable in extreme outdoor environments, finding use in applications.

Kemrock handrail, ladders and access systems offer long life, low maintenance solutions. Our access engineering systems are lightweight and offer high resistance towards corrosion. Easy to fabricate, the installed cost of kemrock composite handrails and ladders is often lower than that of steel. Being a fibreglass reinforced composite, the handrails and ladders are thermally and electrically non conductive, offer excellent uv resistance and are extremely durable in extreme outdoor environments, finding use in applications such as.

Applications
architectural installations
bridges and highways
chemical industries
commercial complexes

The easyreach composite access system is a temporary platform erected to enable safe working at height. Complying with en1004:2004, easyreach is suitable for working heights up to 12.2 metres, particularly in zone 1 areas of potential hazard. Manufactured from a combination of pullwound and pultruded profiles, and connected with injection moulded fibreglass reinforced nylon fittings, easyreach offers many advantages over traditional scaffold systems made of bamboo, lumber, aluminium and steel.

Features :
corrosion resistant
lightweight
easy assembling & dismantling

Kemrock manufactures a range of pultruded decking systems. The decks are each interlocking and available in a range of resin systems to suit the application. Manufactured using in-house produced thermosetting resins, and reinforced with Kemrock's own technical fabrics, Kemrock's decking systems offer exceptional performance at highly competitive prices.

These specially designed louvres are manufactured from insulated blades which provide good weather protection, sound attenuation and aesthetics that complement any architecture. These louvres use acoustic grade glass fibre as the sound absorbing medium. They are used as a part of air intake or exhaust air system of buildings or equipment to reduce the noise produced by equipment. These are often used as sound enclosure for pumps, generators and compressors. These louvres are available in channel or optional flanged type and are available in different depths.

Kemrock offers a comprehensive range of high-performance thermosetting resins viz. Unsaturated Polyesters, Vinyl Esters, Phenolic & Epoxy Resins for the composites industry in India. These resins are manufactured at Kemrocks most modern manufacturing facilities controlled by precision DCS Systems, delivering batch-to-batch consistency. Approvals by Water Regulations Advisory Scheme (WRAS), Germanischer Lloyd (GL) and supported by a well-equipped R&D facility, ensure that the resins meet customers expectations.