Our Products
1. Double Walled, Outer M. Steel/S. Steel, Inner Chamber of S. Steel.
2. Lid made of S. Steel Fitted with Radial Locking Device, Pedal Lifting Device, Pressure gauge, Steam release valve, Water Level Indicator.
3. Fitted with Automatic Pressure control switch.
4. Provided with SS Basket.
5. Electrically operated suitable to work on 220V/ AC.
High Pressure Vertical Sterilizer KI-174(a)
1. Triple Walled, Inner Chamber, Outer chamber & Jacket made of S. Steel.
2. Lid also made of thick SS plate.
3. Fitted with Moisture Trap and vacuum breaker.
4. Suitable for Dry sterilization.
5. Other Specification same as Model No. K I171
Our company offers rectangular autoclaves, which are fabricated with high quality raw material and latest technology. Due to our latest infrastructural facilities, we have been able to develop these products with cutting edge technology.
Rectangular High Pressure Horizontal Sterilizer KI 174 (C)
Triple walled, Outer body, Inner Chamber and jacket made of SS 304/316 sheet . The unit is mounted on a sturdy tubular stand. Lid is made of thick SS plate provided with radial locking system, gaskets of Neoprene rubber and fitted with SELF LOCKING SAFETY LOCK. Sterilizer is hydraulically tested upto 40 PSI & Working pressure is adjustable from 10 PSI to 20 PSI 1 PSI at any selected point with Automatic Pressure Switch. Sterilizer is fitted with Steam release valve, spring loaded safety valve, pressure gauge, Low water level cut off device, Automatic vacuum breaker, Dial/Digital thermometer and MULTIPORT VALVE for easy operation of the sterilizer.
Steam is generated in a separate boiler made of SS placed at the bottom of the autoclave fitted with easily replaceable heating elements, water level indicator, drain cock, cord & plug suitable to operate on single phase 440 Volts, 50 cycle AC supply.
Available in following Chamber sizes:-
1. 450 x 450 x 900 mm
2. 450 x 600 x 900 mm
3. 600 x 600 x 900 mm
1. The system is microprocessor based. The microprocessor displays the inflow and down flow air velocities in real time on an LCD display.
2. Motor automatically adjust the air flow speed to ensure continuous safe working condition. Air flow as per requirements of Bio safety regulations in respect of atleast BSC II A level cabinet.
3. Noise level less than 65 decibel.
4. The interior of the cabinet of SS.
5. Efficiency of HEPA filter is almost 99.97%.
6. The Bio safety cabinet is fitted with a pressure sensor to detect pressure drop across the supply filter.
7. Front of the cabinet shall be angled to help minimize glair.
8. Fluorescent lamps for lighting of the interior of the cabinet.
9. UV light is also fitted to disinfect the interior of the cabinet. UV light shall be programmable to allow for specific exposure time from 0 to 24 hrs. Automatic UV switch =OFF on opening of front window. The front window is made of laminated safety glass to protect against leakage of UV rays and to ensure containment of potential hazardous material.
10. Safety alarm / safety display forLow air velocity and Faulty exhaust fan.
11. Power input 220-240 V AC, 50 Hz fitted with Indian plug.
12. Movable stands
13. Dimensions: 4x2x2 and 6x2x2
We are one of leading manufactures and exporters of BOD incubators, which are fabricated with latest technology to offer optimum efficiency. These incubators have been appreciated for their uniformity of temperature due to two circulation fans.
B.O.D Incubators Model No. KI-216 :
1. Triple wallted, outer made of MS duly Powder coated and inner chamber of AL/SS
2. 3" Gap between outer and inner chamber is insulated with thick blanket of high efficiency mineral wool
3. Temp. Range 5 to 50C 0.5C controlled with Digital Temperature controller
4. Provided with 2 Nos circulation fans for uniform temp.
5. A built in CFC Refrigeration unit with Kirloskar compressor & condensing unit provides temp. below ambient temperature
6. Sizes available 4C ft./6Cu. ft./ 10Cu. ft./12Cu. ft./15Cu. ft
7. Electrically operated on 220V/ AC. Single Phase
Optional Accessories :
1. Interior Illumination with 3 Nos. fluorescent tubes of 60 cm length
2. 0-24 Digital Timer
We are manufacturing a wide assortment of humidity and temperature control cabinet in two different models i.e. KI 220 and KI 221. These chambers have been appreciated for their robust construction and durability among our clients.
Humidity :
1. In the model the KI 220 the humidity is controlled by significant humidistat
2. It has a range between 0% to 100%
3. The humidity inside the chamber can be obtained from Atmospheric Humidity to 95% 3%
Temperature :
1. In the chamber the temperature is controlled by a Thermostat from 5 Deg. C above ambient to 60 Deg. C1 Deg.
2. Further, C Uniformity in temperature and humidity throughout the chamber can be attained by the Forced Air Circulation generated inside the chamber.
Specifications :
1. Double walled chamber
2. Inner walls are made of anodized aluminum/ S. Steel
3. Outer walls are made with M.S. sheet finished in stoved enamel paint
4. 75 mm gap between outer & inner chamber, which is filled with thermocol of Glass wool
5. The door is double walled with a gasket which seals the inner chamber against atmospheric infiltration
6. A glass window is also provided at the door which allows inspection of the samples without disturbing temperature of the inner chamber
Model No. | Size | Volume | No. of Shelves |
KI-220 KI-220 |
455X455X720 mm 605X605X905 mm |
155 Lt. 245 Lt. |
2 3 |
1. Reciprocating Kahn shaker is used for shaking Racks, bottles/flasks of different capacity by adjusting compartments provided on the shaking rack.
2. Fabricated out of MS sheet duly powder coated.
3. Fitted with PMDC geared motor & Dimmer stat for variable speed.
4. Speed Range: 140 to 250 RPM
5. Covered Body
6. Suitable to work on 220V, AC.
Available in following Platform sizes:
1. 20"x13"x4"
2. 31"x17"x4"
3. 36"x18"x4"
1. Double Walled, Outer M. Steel/S. Steel, Inner Chamber of S. Steel.
2. Lid made of S. Steel Fitted with Radial Locking Device, Pedal Lifting Device, Pressure gauge, Steam release valve, Water Level Indicator.
3. Fitted with Automatic Pressure control switch.
4. Provided with SS Basket.
5. Electrically operated suitable to work on 220V/ AC.
High Pressure Vertical Sterilizer KI-174(a)
1. Triple Walled, Inner Chamber, Outer chamber & Jacket made of S. Steel.
2. Lid also made of thick SS plate.
3. Fitted with Moisture Trap and vacuum breaker.
4. Suitable for Dry sterilization.
5. Other Specification same as Model No. K I171
Frame work made of rectangular M.S. Tube.
4 Section top made of perforated M.S. Sheet.
Backrest, Knee Rest Trendlenburg/ Reverse Trendlenburg and Hi-Lo Positions obtain by Electric Actuator operate by hand remote system.
ABS molded head & foot panels.
ABS tuck away safety side railing.
Telescopic IV Rod with two locations.
Bed mounted on 125 mm dia castor two with brakes.
Overall size: 210L 90W 60-80H cms.
Finish: Epoxy Powder Coated. Optional.
CPR functions on backrest section.
Central Breaking Castors.
We are one of the top notch manufacturers and suppliers of optimum quality hospital crash cart. We use high quality raw material to ensure durability and optimum performance of the Cart.
To suit the varied requirements of the clients, we can also provide the customized range of the crash cart.
Features :
1. Robust Construction
2. Durability
3. Reliable
We are manufacturing and exporting a wide range ofOT lightswhich are available in various types like Floor Model, Ceiling Mounted Model and Ceiling Twin Light Model. These are very useful and effective in the operations theatre and provide great help in the operation process.
Specifications :
1. 19" Twin Dome.
2. Intensity controller to control at 8 different levels.
3. Centre sterilis able handle.
4. Heat absorbing and colour corrected filter glass.
5. Providing with stand by bulb.
6. Intensity: 140000 Lux.
7. Halogen bulb 24 V, 150 W