Our Products
King Industrie Dynamic Braking Resistors are consist of smooth wound, wire wound or edge wound type resistor coils mounted in ventilated enclosures. Our resistors can be used in any type AC or DC power circuit/application. They are designed for many types of applications: continuous duty applications where high resistance and low current are required, continuous duty applications where low resistance and high current are required and low current applications. Dynamic breaking Braking resistors are also available with a special stainless steel enclosure with Degree of Enclosure protection up to IP42
DYNAMIC BREAKING RESISTORSis the simplest and most widely used method of brakinga load driven through a d.c.motor as it involves no wear & tear unlike mechanical brakes. For dynamic braking, the motor armature is closed on a suitably designed Dynamic Braking Resistor(DBR), while the motor field remains energised.The kinetic energy stored in motor and load gets dissipated in the DBR and the system comes to a halt within a few seconds.
when the motor is braked, it is desired that it comes to a halt in minimum possible time. Hence the ohmic value of DBR is selected such that it causes maximum braking current at the instant of starting the braking.This current depends on the overload capacity of themotor.The Ohmic value ofDBRisR=Vr/IPwhereVris the motor armature rated voltage andIpis permissible current. Dynamic braking starts with maximum current and falls exponentially with time, while the field current is maintained constant.The armature voltage and motor speed also decay exponentially.The motor comes to a halt in a time period equal to apprx.twice the time constant(r)as friction also aids the braking process.In most applications r is less than 5 secs and hence dynamic braking is less than 10 secs.
We are doing complete reconditioning / revamping & up gradation of E.O.T. Cranes including complete Electrical and Mechanical work.
Design, errection & commissioning of complete electrics for up gradation of E.O.T. Cranes from
King Industrie make Neutral Grounding Resistors are designed, manufactured and tested for the ultimate in safety, reliability and product life.
Neutral Grounding Resistors are the most effective, common, economical and preferred method of grounding.
The neutral grounding systems purpose is to protect life and property in the event of 50/60 Hz faults (short-circuit) and transient phenomena. King Industrie make Neutral Grounding Resistors are designed and tested in strict accordance with IEEE Standard 32-1972.
Applications
Additional Information:
Payment Terms :
Packaging Details : DEPEND UPON THE DESTINATION
Delivery Time : 120 DAYS
We are also manufacture FeCrAl / Ni-Cr / Stainless steel punch grid
Strips come in different sizes and are made of FeCrAl alloy. Resistance coil is made by edge winding of the strips with multi turns which are cut as per design to gain required resistance values. The coils are inserted on porcelain grooves, which are in turn supported by a metal plate( Center Strip). These types of elements are fitted on metal trays of the resistor box.
We are also manufacture Anti Collision Device for EOT cranes
We are also manufacture electrical panel for EOT cranes and Coils for Traction & industrial Moter
Manufacturing and supplying space heaters such as industrial space heaters