Post Buy Requirement
KI
Ahmedabad, Gujarat, India
Add Review

Our Products

Elastromeric Pipes

Kisan (aka trimurti ksr) elastromeric pipes are the latest in technological innovations from kisan. Solvent cement is the most commonly used material for jointing pvc pipes. But solvent cement poses innumerable problems.
View Complete Details

Chemigation Equipment

In the process of fertigation chemigation, fertilizer is applied directly with the irrigation water. Therefore, wherever the water goes, the fertilizer goes with it. Fertilizer is applied only where needed, and in the proper quantities. The obvious advantages of fertigation, therefore, are the saving of labor and machinery, and the efficient use of the costly chemicals and fertilizers to be applied.
View Complete Details

Agricultural Pipes

The use of PVC for production of pipes is one of the most important development in helping to fulfill the basic need of clean and hygienic water. Kisan (aka TrimurtiKSR) uPVC pipes are made from highest grade quality resin.
Kisan (aka TrimurtiKSR) Self socketed pipes have one end self socketed and the other end plain, which fit snugly, doing away with the need for couplers.
View Complete Details

Hdpe Pipes

Even in heavy land areas, where only the strongest galvanized iron, cement and asbestos survive; plastic, in the form of High Density Polyethylene (HDPE) has scored beyond doubt.
View Complete Details

Submersible Pipes

In order to tap the underground water resources, the most critical requirement while digging the borewell tubewell is of the rising main pipes. These pipes must have the ability to withstand high tensile loads. The most suitable & time tested material that meets this demand is uPVC, due to its inherent properties over galvanised pipes.
View Complete Details

Casing Pipes

Today, boretube wells are widely accepted as the suitable means of tapping water resource from the depths of the earth. uPVC casing pipes, due to their desirable performance characteristics have been recognized as the most suitable material for bore tube well construction. This is the outcome of the inherent advantages of uPVC casing pipes over conventional MS Casing pipes.
View Complete Details

Solvent Cement

Solvent Cement is used to join two or more pipes or join a pipe to a fitting or a fitting to a fitting.Solvent Cement is available in plastic bottles of 25ml, 50ml, 100ml, 250ml, 1Ltr, and 30Ltr cans. It is also available in aluminum tubes of 25ml, 50ml, and 100ml.
View Complete Details

Braided Hoses

Highly Flexible and light weight
The transparent hoses show inner movement
Good resistance to chemicals, pressure and abrasion, ideal for transporting powders and granular materials
View Complete Details

Agricultural Fittings

In a short span of time Kisan Irrigation has produced the largest range and sizes of injection moulded PVC fittings in the country. The fittings, confirming to as per IS standards, are made from the highest grade quality resin. PVC fittings ensure easy installation, quick modifications as well as complete flexibility in constructing a piping system.
View Complete Details

PVC Ball Valves

Pvc Ball Valves are made from the highest quality grade of Pvc Resin. Its main function is to control the flow of water.
View Complete Details

Drip Irrigation Systems

Micro Irrigation Methods are the pressurized Irrigation Systems consisting of Drip & Sprinkler Irrigation. In Micro Irrigation water from water source is lifted by a pumping unit & conveyed directly to field by closed conduit piping net work without any conveyance losses.
View Complete Details

Sprinkler Irrigation System

Sprinkler irrigation is a method of applying irrigation water which is similar to natural rainfall. Water is distributed through a system of pipes by pumping at pressure above 2 kgcm2 and then sprayed into the air through sprinklers so that it breaks up into small water drops which fall to the ground.
View Complete Details

Mini Sprinklers System

Kisan Mini Sprinklers can be used for marginal water and marginal land irrigation requirements.
View Complete Details

Blue Threaded Plumbing Systems

Galvanised Iron Pipes have been in use for the past few decades for the distribution of portable water. The quality of these pipes had deteriorated so drastically over the past decade, that environmentalists and public health engineers had to search for a proper replacement to overcome
View Complete Details

C Pipes & Fittings

PPR-C means Polypropylene Random Copolymer (-CH2- CH-) n CH3
Kisan PPR C plumbing pipes is the right choice for hot and cold water distribution, proven worldwide due to its combining performance Durability, Reliability, Safety with Cost Saving. Kisan PPR-C Pipes & Fittings are manufactured from PPR-C Type 3 having low melt flow rate, high molecular weight and excellent creep resistance which gives long term performance under mechanical stress.
View Complete Details

White Plumbing Pipes

1. Contamination of water due to corrosion, algae formation, roots penetration etc.
2. Reduced flow with passage of time resulting in choked lines.
3. Leakage due to galvanic action and corrosion etc.
View Complete Details

Rubber Lubricants

For easy installation of SWR Pipes & Fittings always use KSR Rubber Lubricants.
This is available in easy & convenient packing from 50 gms to 1 kg.
View Complete Details

Conduit Pipes

Conduit Pipes are manufactured from a specially formulated un-plasticized polyvinyl chloride to meet most stringent Indian and International standards. The products are manufactured in accordance with IS:9537 Part 3, BS: EN 61386-21 for uPVC conduits IS:3419.
View Complete Details

SWR Drainage Systems

KSR SWR systems have been quickly replacing the conventional systems that are being used in the building industry. The pipes and fittings are extremely light in weight, strong, durable, dimensionally stable and are safe in handling, transportation and installation. They also have high impact strength. The trouble free performance of SWR pipes & fittings saves a lot of inspection and maintenance cost.
View Complete Details

Higher Diameter PE Pipes

We offer higher diameter pe pipes.
Even in heavy land areas, where only the strongest galvanized iron, cement and asbestos survive; plastic, in the form of high density polyethylene (hdpe) has scored beyond doubt.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Rajesh Sharma (Kisan Irrigations & Infrastruture Ltd.)
  • 101,N.r.house,Near Popular House,Ashram Road,Ahmedabad, Gujarat, India
  • Share us via
Browse Our Products list of Kisan Irrigations & Infrastruture Ltd. Ahmedabad, Gujarat
Post Buy Requirement
KI
Ahmedabad, Gujarat, India
Add Review

Our Products #2274856

Elastromeric Pipes

Kisan (aka trimurti ksr) elastromeric pipes are the latest in technological innovations from kisan. Solvent cement is the most commonly used material for jointing pvc pipes. But solvent cement poses innumerable problems.
View Complete Details

Chemigation Equipment

In the process of fertigation chemigation, fertilizer is applied directly with the irrigation water. Therefore, wherever the water goes, the fertilizer goes with it. Fertilizer is applied only where needed, and in the proper quantities. The obvious advantages of fertigation, therefore, are the saving of labor and machinery, and the efficient use of the costly chemicals and fertilizers to be applied.
View Complete Details

Agricultural Pipes

The use of PVC for production of pipes is one of the most important development in helping to fulfill the basic need of clean and hygienic water. Kisan (aka TrimurtiKSR) uPVC pipes are made from highest grade quality resin.
Kisan (aka TrimurtiKSR) Self socketed pipes have one end self socketed and the other end plain, which fit snugly, doing away with the need for couplers.
View Complete Details

Hdpe Pipes

Even in heavy land areas, where only the strongest galvanized iron, cement and asbestos survive; plastic, in the form of High Density Polyethylene (HDPE) has scored beyond doubt.
View Complete Details

Submersible Pipes

In order to tap the underground water resources, the most critical requirement while digging the borewell tubewell is of the rising main pipes. These pipes must have the ability to withstand high tensile loads. The most suitable & time tested material that meets this demand is uPVC, due to its inherent properties over galvanised pipes.
View Complete Details

Casing Pipes

Today, boretube wells are widely accepted as the suitable means of tapping water resource from the depths of the earth. uPVC casing pipes, due to their desirable performance characteristics have been recognized as the most suitable material for bore tube well construction. This is the outcome of the inherent advantages of uPVC casing pipes over conventional MS Casing pipes.
View Complete Details

Solvent Cement

Solvent Cement is used to join two or more pipes or join a pipe to a fitting or a fitting to a fitting.Solvent Cement is available in plastic bottles of 25ml, 50ml, 100ml, 250ml, 1Ltr, and 30Ltr cans. It is also available in aluminum tubes of 25ml, 50ml, and 100ml.
View Complete Details

Braided Hoses

Highly Flexible and light weight
The transparent hoses show inner movement
Good resistance to chemicals, pressure and abrasion, ideal for transporting powders and granular materials
View Complete Details

Agricultural Fittings

In a short span of time Kisan Irrigation has produced the largest range and sizes of injection moulded PVC fittings in the country. The fittings, confirming to as per IS standards, are made from the highest grade quality resin. PVC fittings ensure easy installation, quick modifications as well as complete flexibility in constructing a piping system.
View Complete Details

PVC Ball Valves

Pvc Ball Valves are made from the highest quality grade of Pvc Resin. Its main function is to control the flow of water.
View Complete Details

Drip Irrigation Systems

Micro Irrigation Methods are the pressurized Irrigation Systems consisting of Drip & Sprinkler Irrigation. In Micro Irrigation water from water source is lifted by a pumping unit & conveyed directly to field by closed conduit piping net work without any conveyance losses.
View Complete Details

Sprinkler Irrigation System

Sprinkler irrigation is a method of applying irrigation water which is similar to natural rainfall. Water is distributed through a system of pipes by pumping at pressure above 2 kgcm2 and then sprayed into the air through sprinklers so that it breaks up into small water drops which fall to the ground.
View Complete Details

Mini Sprinklers System

Kisan Mini Sprinklers can be used for marginal water and marginal land irrigation requirements.
View Complete Details

Blue Threaded Plumbing Systems

Galvanised Iron Pipes have been in use for the past few decades for the distribution of portable water. The quality of these pipes had deteriorated so drastically over the past decade, that environmentalists and public health engineers had to search for a proper replacement to overcome
View Complete Details

C Pipes & Fittings

PPR-C means Polypropylene Random Copolymer (-CH2- CH-) n CH3
Kisan PPR C plumbing pipes is the right choice for hot and cold water distribution, proven worldwide due to its combining performance Durability, Reliability, Safety with Cost Saving. Kisan PPR-C Pipes & Fittings are manufactured from PPR-C Type 3 having low melt flow rate, high molecular weight and excellent creep resistance which gives long term performance under mechanical stress.
View Complete Details

White Plumbing Pipes

1. Contamination of water due to corrosion, algae formation, roots penetration etc.
2. Reduced flow with passage of time resulting in choked lines.
3. Leakage due to galvanic action and corrosion etc.
View Complete Details

Rubber Lubricants

For easy installation of SWR Pipes & Fittings always use KSR Rubber Lubricants.
This is available in easy & convenient packing from 50 gms to 1 kg.
View Complete Details

Conduit Pipes

Conduit Pipes are manufactured from a specially formulated un-plasticized polyvinyl chloride to meet most stringent Indian and International standards. The products are manufactured in accordance with IS:9537 Part 3, BS: EN 61386-21 for uPVC conduits IS:3419.
View Complete Details

SWR Drainage Systems

KSR SWR systems have been quickly replacing the conventional systems that are being used in the building industry. The pipes and fittings are extremely light in weight, strong, durable, dimensionally stable and are safe in handling, transportation and installation. They also have high impact strength. The trouble free performance of SWR pipes & fittings saves a lot of inspection and maintenance cost.
View Complete Details

Higher Diameter PE Pipes

We offer higher diameter pe pipes.
Even in heavy land areas, where only the strongest galvanized iron, cement and asbestos survive; plastic, in the form of high density polyethylene (hdpe) has scored beyond doubt.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Rajesh Sharma (Kisan Irrigations & Infrastruture Ltd.)
  • 101,N.r.house,Near Popular House,Ashram Road,Ahmedabad, Gujarat, India
  • Share us via