Our Products
India Mark-II handpump is divided into four main assemblies. | ||||||||||||||||||||||||||||||||
|
| ||||||||||
|
Model | Out side Diameter |
Combined Hammer | Combined Bit | Connection | Hole size Standard Range | Length | Weight | Air Consumption CFM (200PSI- 250PSI) |
|
mm | Tri | Circle | mm | mm | Kg | ||||
HIPPO 17" | 397 | 4" Digger Hammer | 4T | 1C | API Threading | 430-439 | 1850 | 800 | 1500-1800 |
HIPPO 20" | 485 | 5" Digger Hammer | 4T | IC | API Threading | 508-515 | 1850 | 950 | 1600-1900 |
HIPPO 22" | 520 | 6" Digger Hammer | 4T | IC | API Threading | 558-568 | 1850 | 1050 | 1800-2000 |
HIPPO 24" | 565 | 6" Digger Hammer | 4T | IC | API Threading | 609-619 | 1950 | 1130 | 2200-2400 |
Panel |
Instrument panel consists of Tachometer, hour meter, engine oil pressure, fuel gauge and audiovisual gauge for transmission oil pressure. |
Charging (Ammeter) Dynamo, water temp. Control switch for lights. Engine fuel shut off-stop lever. |
Steering column has the electrical controls for turning indicator, dip switch while driving wiper control etc. and for forward reverse direction selection. |
Axle and final drive |
Rear Axle: Drive axle rigidly mounted, forward and reversing shuttle Gear Box 4 speed Sychromosh gear box in rigid axle housing with a torque conversion. |
Front Axle: Steer axle centrally pivoted with oscillation angle of 20o total. |
Brakes: Hydraulically actuated dual line, self adjusting oil enmersed multidisc type on the rear axle, well protected, requires literally no maintenance. |
Parking |
Hand operated disc brake on Rear Axle. |
Stearing |
Front wheel has the hydrostatic power steering with manual capability in the event of hydraulic system failure form high pressure hydraulic oil is directly supplied via priority valve with a working pressure. |
Engine | Overall Dimensions | |||
Model | 4R 1040 (Kirloskar) | L x W x H (mm) | 938 x 525 x 1025 | |
Type | Water Cooled | Flywheel housing | SAE 3 | |
Fuel | Diesel | Dry weight (Kgs) | 491 | |
Number of Cyl | 4 | Max. Torque (Kgm) | 27.7 Kg-m @ 1359 rpm | |
Displacement | 4160 Cm3 | Alternator | 35 amps | |
Rated Power KW (HP) | 56 (76) at 2000 rpm | Battery | 12 V 135 amps (-ve earth) | |
Compression System | Direct injection | Transmission | ||
Compression ratio | 18:1 | Model | TLB1 4WD | |
Bore mm | 105 | Make | M/s. CARRARO Spa-ITALY | |
Stroke mm | 120 | Type | Hydro dynamic torque converter with separate clutch plate drive for forward & reverse. | |
Lubrication | Force feed | |||
Starting of engine | 12 volts electrical system | Converter stall Torque ratio | 2.63:1 | |
Forward Transmission ratio | 1stspeed | 5.350 | Service Capacities | |
2ndspeed | 2.965 | Hydraulic system | 120 Ltrs | |
3rdspeed | 1.544 | Filtration | 12 Microns | |
4thspeed | 0.827 | Fuel tank | 95 Ltrs | |
Travel Speed with Std. Tyres | Engine Coolant | 7 Ltrs | ||
1stGear | 5.6 Kmph | Engine Oil | 12.5 Ltrs | |
2ndGear | 10.9 Kmph | Transmission oil | 16 Ltrs | |
3rdGear | 21.9 Kmph | Rear axle | ||
4thGear | 32.4 Kmph | Central chamber | 14.2 Ltrs | |
TyreSize (Standard) | Planetary (each) | 2 Ltrs | ||
Front | 9.00 x 16.00 x 16 Ply rating | Gear lubricant API GL5 or equivalent Brake oil | 1.5 Ltrs | |
Rear | 6.9 x 28 x 12 Ply rating |
Hydraulic System | Cylinders | ||||
Main pump flow | @ 2200 rpm | 99 lpm Variable volume pump | Front | Rear end | |
Auxiliary pump | @ 2200 rpm | 34 lpm | Stabilizer | - | 2 |
Working pressure | Loader arm | 2 | - | ||
Loader attachment | Bar | 180 | Loader shovel | 2 | - |
Backhole Attachment | Bar | 210 | Swing | - | 2 |
Filtration through suction strainer, Return line filter of 12 micron | Boom lift | - | 1 | ||
Electricals | Digger | - | 1 | ||
12 Volts system with battery, a alternator & full road lighting | Bucket | - | 1 | ||
Steering | 2 |
Mineral Water Unit (Portable) | ||||||||||||||||||
|
KLRHammers are manufactured to international specifications, from only the best quality Alloy Steel, machined to high precision and supreme standards. The products are heat-treated in the most modern, fully process controlled, in-house facility. The Carbide Buttons which are used are obtained from leading and reputed indigenous and foreign manufacturers. |
KLRHammer are quality products that conform to international standards and strict quality control methods. |
KLRproducts are constantly improved with adaptation of the most recent manufacturing technologies and the product features always ensure, |
Longer Product Life | |
Higher and consistent penetration rate | |
The capacity and capability to perform hitch-free at higher pressure range (80-350 PSI) | |
Reduced number of parts, and compact structure for lower rate of wear & tear | |
Avoidance of Back Hammering, Hammer blocking etc. | |
Minimum maintenance costs |
Self Propelled Skid Mounted Rig
Description | CDR 150 (CORE) | CDR-150 (DTH) |
Drilling Capacity | ||
Regular Drill hole Diameter | 76 mm(Core:Ø 54 mm) | 114.3 mm(Ø 4.5”) |
Maximum Drilling Depth (Regular) | 450 Feet. | 500 Feet. |
Over Burden Drill hole Diameter | --- | 165.0 mm(Ø 6.5”) |
Over Burden Max. Drilling Depth | --- | 120 Feet. |
(Under favorable drilling conditions) | ||
MAST | ||
Overall Length | 6150 (+/- 50 mm) | 6150(+/- 50 mm) |
R. H. Travel | 4200.0 mm | 4200.0 mm |
Rod Handling Capacity | 3.0 Mt. (10 Feet) | 3.0 Mt.(10 Feet) |
Bottom Guide | Ø 240.0 mm (Ø9.5) | Ø 240.0 mm (Ø9.5”) |
Hydraulic System | ||
Primer Mover | Deck Engine | Deck Engine |
Feed | ||
Pull Back/Up Force | 4,500 Kg.f. | 4,500 Kg.f. |
Pull Down Force | 2,300 Kg.f. | 2,300 Kg.f. |
Pull Down Speed | 30 m/min. | 30 m/min. |
Pull Back/Up Speed | 24 m/min. | 24 m/min. |
Rotation | ||
Speed | 0_625rpm | 0-100 rpm |
Torque | 59.0kg.f-m | 230 Kg. f-m |
Air Compressor | ||
Minimum Suggested (for DTH Drilling) |
-N.A-) | 600 CFM @ 200 PSI |
Hydraulic Oil Cooler | ||
Capacity | 40 GPM US | 40 GPM US |
Type | Fin type: Oil to Air | Fin type: Oil to Air |
Drive | Hydraulic Motor | Hydraulic Motor |
Auxiliary Wireline Winch | ||
(Optional | 800Kg.f @ 40 Mt./min | 800Kg.f @ 40 Mt./min |
Water Injection Pump | ||
Capacity Suggested Min. | 36 LPM @ 30Kg.f/cm2 | 36 LPM @ 30Kg.f/cm2 |
Drive & Mounting (optional) |
Hydraulic | Hydraulic |
Heavy-duty transmission specifically designed for crane application | |
Heavy duty Winch Motor for hoisting | |
Articulated chassis for turning radius | |
Specifically built long chassis for more reliability | |
2 part telescopic boom hydraulically extendable for more outreach and high lift |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Specifications
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||