KNN. ASSOCIATES

Chintal, Hyderabad, Telangana

Electronic conveyor belt scale system enables the weighing of bulk materials carried by conveyor belts during the conveying process. The flow amount (capacity) is proportional to the speed and the material on the belt. Conveyor Belt Unit With Idler(s); They are designed to fit every kind of conveyor belts used in the industry and located in place of one or a group of idlers where the belt moves on. The unit is a steel construction which realizes the weight of the bulk material on the belt by means of load cells. Depending on the single-idler group construction (SIB) with two load cells or multi-idler group construction (MIB) with 4 load cells are used. The protection is IP68 class. Both, MIB construction and SIB construction offer the same high level of accuracy which is approved by tests in ESIT Laboratories. The load cells have an IP68 class protection while the indicator has IP66 grade protection. Control Terminal; The measured value is displayed digitally by the microprocessor based model LCA control device. Daily, statistical data can be prepared and printed if LCA terminal is connected to DLMS software.

We offer belt watch system. A self-resetting switch that is actuated when the belt sways beyond the permissible limits. The switch is carefully designed to allow over travel of the actuating roller and the switching mechanism is isolated from the mechanical actuating roller. switches available in cast iron & die cast aluminum enclosures in sophisticated as well as economic versions. Switches are also available in industrial polymer enclosure to withstand chemical fertilizer saline (seashore) environment. Ss screws captive in covers to ensure proper retightening after opening for inspection wiring etc. Built in terminal box for sophisticated models, incorporating moulded stud type terminals for easy wiring looping. Switching elements have silver-cadmium alloy tipped contacts with double break and wide contact separation for optimum switching performance. Threaded cable entries are provided to suit single double compression type cable glands. Ball bush bearing option for roller & cam shaft. 1-0 operating position for model sw-4028, 1-0-1 for model sw-4027 2 cam model (1 cam for alarm and one for trip) sw-4026 wide over travel of roller permissible wo damaging switching element. Available in contact combinations 1 no + 1nc 2no+2nc 1no+3nc 3no+3nc. Optional accessories available: led lamp, mechanical flag, terminal strip

Proximity switches provide better alternative to the conventional electro-mechanical limit switches for position sensing . It is a best solution to all linear rotary counting applications. They find wide application in Machine tools, Foundries, Rolling mills, Automobile, Textile, Pharmaceutical, Material handling and all automation systems in general.

• MaterialCast Aluminum
• Frequency50-60 Hz
• Power SourceElectric
• ConditionNew
• ApplicationBelt conveyors
• Number Of FlowerBelt Sway Switch
• Current Rating10 Amp
• Country of Origin240 VAC

We are offering electrical contact cleanar dc-2-26 crc 415 ml 5 ltrs.

Belt Tear Switch This switch is used to monitor any damage to the belt where the belt may be torn and the material is coming through the tear.

Pull Cord Switch with Terminal Box & Lamp A sophisticated pull cord switch that is designed to avoid spurious tripping or accidental resets (snap action) and ensure that the switch will operate after long periods of unused (double break silver-cadmium tipped contacts).

digital voltage meter voltage meter Analag voltage meter voltage meter

Corrent Transfermer volt meter amp meter Electrical Switch Gear

Voltage – Above 0.69 to 6.6 kV Cooling – Type IC 411 IC 416 Construction – Horizontal ( IM B3) Vertical (V1) Frame Sizes – MV 355L, MV 400ML, MV 450 ML kW Range – 160 - 900 ( 4pole), 160 - 750( 6 pole), 160 - 560 ( 8 pole) TEFC - BBL TYPE MV Frequency – 50 & 60 Hz Protection – IP 55 IP 56 Starting – DOL VFD Standards – ISIE Standard features: Compact TEFC motors for high efficiency in cast iron fabricated mild steel construction Dual cooling circuit for even temperature distribution Bearing cooling fan on DE for lower bearing temperature & longer regreasing intervals Class F Insulation with Class B rise Ambient 40 0C & Altitude Epoxy Mica based vacuum pressure impregnated (VPI) insulation system for long life Rotor with Pressure Die cast type Aluminium winding for Ruggedness Phase segregated type main terminal box to prevent & withstand high fault levels Platinum type RTD s - 6 Nos for windings Bearing temperature detectors – 2 No Platinum RTDS. One each at DE and & ODE Non condensation heater Suitable for direct drive thr’o flexible couplings without external thrust ADDITIONAL OPTIONAL FEATURES (Available on request at extra charge) Neutral Terminal Box for Star point Dial type Thermometers for bearings withwithout contacts Suitability for higher Ambient temperature or Altitude Suitability for Pulley gear Drive External thrust B3B5 mounting BBL manufactures TEFC three phase Torque motors with Type 'MT'. These motors are similar to standard induction motors but with a modified high resistance rotor design. The starting torque of these motors is maximum and it has almost linear torque speed characteristics with zero torque at synchronous speed. These motors are used in special applications like Roller Table motors