Ahmedabad, Gujarat, India
Our Products
Station Information
The KSCDL-030 Solar Battery Charger is designed to charge GEL-CELLS or LEAD ACID batteries. It has three distinct operating states.Initially the charging current is limited to a pre-set bulk value and when the battery voltage reaches a specific level the charger enters the absorption mode and tops off the battery with an elevated voltage.After top off, it enters the maintenance mode where it maintains the battery at a precision float level value.
Komoline has developed INSAT based Distress Alert transmitter with technical Know-how from Space Applications Centre (SAC), Ahmedabad. The requirement for a satellite based Alert Transmitter was given by the Indian Coast Guards, for use in fishing boats going deep in to sea. In case of emergency, the fishing boat transmits a short message containing its position and type of emergency to a central location through satellite for rescue operation.
KRTRTS-01 is a portable unit with INSAT basedMSS Transmitter and GSM/GPRS modem forData transmission.The terminal is developed to be used on Trains totrack its Real time location and speed. Features:
The Automatic Terminal Information Service (ATIS) provides a critical information service for the air traffic control. The ATIS System re-ceives airport weather meteorological real time data provided by the local meteorological system (AWOS), it validates, processes and con-vert into METAR and Voice METAR to create an ATIS bulletin. ATIS bulletin can be extended by additional information or substituted by an emergency bulletin by ATCOs. Eventually, the ATIS bulletin is broad-casted over a VHF radio channel as an audio stream towards the landing/taking off aircraft in the terminal area.
Network Management Software (NMS) receive, represent and analyze meteorological data from Automatic Weather Stations. AWS station transmits data from GSM/GPRS/Ethernet/RS232 network. Data accessibility through desktop/web/intranet based web application.
The KSAC-0012 is an outdoor weather shield for protecting temperature and humidity sensors from radiation and environmental factors.Primarily designed to accommodate range of industry standard sensor. Features
The KDS-311 from Komoline Aerospace Limited is a smart conductivity-and-temperature transmitter with digital communication capability for use in marine environment and applications. They can be also be used in very-high salinity ground or surface water applications. The KDS series sensors are developed indigenously using the state of the art technology and built to exacting specifications. They offer stable, accurate and reliable performance over long periods of time in the tropical conditions of environment.
The KDS-126 from Komoline Aerospace Limited. Ltd is a smartpressure-and-temperature transmitter with digitalcommunication capability for use in marine environment andapplications. They can be also be used in very-high salinityground or surface water applications. The KDS seriessensors are developed indigenously using the state of the arttechnology and built to exacting specifications. They offerstable, accurate and reliable performance over long periodsof time in the tropical conditions of environment.
The KDS series of sensors from Komoline Aerospace Limited. are smart sensors that acquire, correct and process the measurements to engineering units before forwarding them to host systems. The KDS-053 is a multi-drop capable high-performance sensor for the measurement of the total intensity of incident visible light.
The Remote Monitoring Unit (RMU)is designed as a very compact, modular, rugged, powerful and low-cost system and housed in a small self-contained package. The other subsystems necessary to complete the RAWS are a solar panel and sensors in addition to the installation mechanics and accessories. Sensors are available for many common parameters.
All inputs can be translated into engineering units by flexible gain and offset transfer-function that is set by the user.
AWS Web Portal receive, represent and analyze meteorological data from Automatic Weather Stations. AWS station transmits data from GSM /GPRS / Ethernet / RS232 network.
Features
Station Information
The KIPS-6051 is compact in-situ parametric station for the measurement, recording and forwarding of tide data. The data transmission is through GSM/GPRS communication network and is compatible with most networks. The tide measurement in this system is based on radar based water level sensor which has very good long-term stability and very low hysteresis.
The KSAC-0010 is an outdoor weather shield for protecting temperature and humidity sensors from the effects of radiation and of the environmental factors. Although primarily designed to work with Komoline proprietary range of sensors, the weather shield can be used with most sensors that are physically compatible. Features
The 4073 is a rain logger for a broad spectrum of in-situ recording applications. It been miniaturized and packed to fit into the basic tipping bucket rain sensor for a compact and easy installation. The sensor is fully corrosion proof and sports several fouling resistant features like debris/insect barriers so that it can be applied in a variety of environments. The sensor also provides logging of rain water temperature.
Durable ABS/Acetal moulded float componets with proven, micropower parametric measurement and data forwarding electronics from the Komoline stable.
Parametric Measurements:
PDA based AWS Application Software is used for following purpose. 1. Data Retrieval Module It is used to read the various real-time metrological parameters and logs (stores) for future reference. It is used for taking the backup of the data which records in the data logger with the use of the RS-232. 2. System Configuration and Sensor Configuration Data Logger System Configuration Software is used to read / write the various parameters and logs (stores) for future reference. It is used to configure com-mon parameter and sensor parameter of data logger with the use of RS-232. Simple and easy to use software can configure parameter at single click. This Software requires no programming skills, and enables the user to effortlessly reading the recorded data, specify the user's user ID, and initiate the start of data collection. It will configure System Parameters and Sensor Parameters. It is our goal to bring the user accurate, low-cost, easy-to-use software that inte-grates easily into the user's working environment. To better understand the user's needs and to better serve the user, we welcome and appreciate your feedback
The KIPS-6030 is compact in-situ parametric station for the measurement, recording and forwarding of water level and atmospheric pressure. The data transmission is through GSM/GPRS communication network and is compatible with most networks. The water level sensing is by way of an absolute pressure hydrostatic head sensor in conjunction with an atmospheric pressure sensor for compensation. Absolute pressure measurement does not require vent tubes with humidity traps and any consequent maintenance issues. The system provides for an electronic stilling well in the form of a flexible wave attenuation filter and can be deployed in virtually any environment. Atmospheric pressure and water temperature measurements are also available as separate parameters from the station.
The KIPS-6040 is compact in-situ parametric station for the measurement, recording and forwarding of water level. The data transmission is through GSM/GPRS communication network and is compatible with most networks. The shaft encoder method of level sensing in stilling wells is a time tested technique and provides good accuracy with simplicity. The sensor has a long history of deployment.
Specifications
Calibration: IMD
The KIPS-6031 is compact in-situ parametric station for the measurement, recording and forwarding of tide data. The data transmission is through GSM/GPRS communication network and is compatible with most networks. The tide measurement in this system is based on absolute pressure measurement, by way of SS or Ceramic or sapphire supported titanium precision strain gage sensing elements of very good long-term stability and very low hysteresis. Features
Station Information
KAL has developed INSAT based Distress Alert Transmitter (DAT) is used to transmit emergency conditions and position location to a central HUB station via UHF transponder of INSAT for rescue operation. It is developed to help Fisherman / Sailing Vessels community.
