Kool Drop Cooling Towers Pvt Ltd

Dwarka, Delhi

WOODEN COOLING TOWERS MANUFACTURED BY KOOL DROP ARE DESIGNED TO PERFORM TO THE MAXIMUM EFFICIENCY USING ALUMINIUM FRP FANS WITH DIRECT DRIVE OR GEAR BOX.

KOOL DROP MANUFACTURES FRP ROUND BOTTLE SHAPE COOLING TOWERS BASED ON INDUCED DRAFT COUNTER FLOW DESIGN USING ROTARY WATER DISTRIBUTION SYSTEM USING ALUMINIUM SS GUN METAL SPRINKLER .

AERODYNAMICALLY DESIGNED FRP BLADES GENERATE HIGHER AIR VOLUME AND BELL MOUTH SHAPE FAN CYLINDERS ENSURE LOW PRESSURE DROP DURING THE OPERATION OF COOLING TOWER RESULTING IN TO THE LOWER POWER CONSUMTION AND LONGER LIFE OF GEAR BOX AND MOTORS.

PERFECTLY BALANCED TUBULAR FLOATING TYPE DRIVE SHAFTS WITH FLEXIBLE COUPLING USING NO LUBRICATION FOR MOVEMENT ARE DESIGNED FOR MOTORS OF RATING 10 HP TO 250 HP.

HERRINGBONE TYPE DRIFT ELIMINATORS OF TREATED WOOD OR PVC DESIGNED IN SUCH A WAY THAT THERE IS VERY LOW DROP IN AIR PRESSURE.

SPIRAL BEVEL REDUCTION GEAR BOXES DESIGNED BY KOOL DROP ARE STURDY , QUIET IN OPERATION AND MADE FOR CONTINUOUS HEAVY DUTY OPERATIONS. THESE GEAR BOXES ARE DESIGNED ON 2.5 SERVICE FACTOR AND SUITABLE FOR FANS OF 530 T0 163 RPM. .

SPLASH BARS (TREATED WOOD) , PVC V BARS AND PVC FILM TYPE FILLS OF VARIOUS SIZES LIKE 600 MM X 1500 MM, 600 MM X 1800 MM 0R 600 MM X 2400 MM CAN BE USED IN COOLING TOWERS DEPENDING ON THE APPLICATIONS.

FRP AND SS-304 GRIDS ARE MANUFACTURED BY KOOL DROP THESE GRIDS ARE DESIGNED TO BEAR MAXIMUM POSSIBLE LOAD AND LAST LONG EVEN AFTER CONTINUOUS EXPOSURE TO NORMAL OR ACIDIC WATER.

BUSHES ARE MADE OF NITRILE RUBBER SPECIIALLY DESIGNED TO LAST LONG.

The F. R. P. cooling tower casing has sufficient strength to adequately withstand wind velocities up to 60msec. (134 mph), earthquakes and vibrations.

The water basin like the tower casing is made of FRP. It is bowl shaped, with a cylindrical auxiliary suction tank at the bottom. This construction eliminates the danger of drawing air into the pump when operating with minimum water in the basin. A drain is provided to facilitate the removal if accumulated dirt from the bottom of the tank. The bowl shape of the water basin facilitates the cleaning of the tower interior.

Spirally bound Drift Eliminator is made of PVC it is designed to reduces drift losses and cause negligible drop in air pressure.

FRP AND SS-304 GRIDS ARE MANUFACTURED BY KOOL DROP THESE GRIDS ARE DESIGNED TO BEAR MAXIMUM POSSIBLE LOAD AND LAST LONG EVEN AFTER CONTINUOUS EXPOSURE TO NORMAL OR ACIDIC WATER.

The fillings are made of PVC. They have excellent heat exchange efficiency and remarkably good chemical resistance. These fills are totally enclosed in the tower, thus excluding them from sunlight and minimizing the growth of algae .

Special design consideration has been given to the rotary sprinkler head with respect of corrosion, abrasion assembling. The sprinkler head is made of aluminum alloy and fitted with ball bearings to take thrust and radial loads. These bearings ensure that the sprinkler head revolves smoothly even with reduced circulation water flow.

KOOL DROP MANUFACTURES FRP RECTANGULAR SQUARE SHAPE COOLING TOWERS BASED ON INDUCED DRAFT COUNTER FLOW AND FORCED DRAFT COUNTER FLOW DESIGN USING STATIONERY TYPE WATER DISTRIBUTION SYSTEM WHICH IS DESIGNED TO DISTRIBUTE HOT WATER UNIFORMLY OVER FILL AREA.

KOOL DROP MANUFACTURES FRP RECTANGULAR SQUARE SHAPE COOLING TOWERS BASED ON INDUCED DRAFT COUNTER FLOW AND FORCED DRAFT COUNTER FLOW DESIGN USING STATIONERY TYPE WATER DISTRIBUTION SYSTEM WHICH IS DESIGNED TO DISTRIBUTE HOT WATER UNIFORMLY OVER FILL AREA.