Other Products / Services #3745905

We are the leading manufacturers and supplier of this products.

Offering Motor Generator Sets. Complete Experiment with below mentioned Items.Type: DC Shunt wound, screen protected. Horizontal, foot mounted, Capacity: 3 HP, RPM: 1500, Volts: 230, Insulation: Class B, Cooling: Fan Cooled Connection:Shunt, all the terminals of armature and x field winding , shall be brought over to a Bakelite sheet fixed to CI terminal, box fitted on top of motor (b) Alternator: Type: Salient pole type, 3 Ph 4 wire screen protected, horizontal foot mounted Capacity, 2 KVA RPM: 1500 for max output and frequency of 50 Hz, Volts: 415 Insulation: Class B Power Factor: 0.8 P.F. Lagging, Connection: 3 Phase 4 wire Control Panel: Fitted on Powder, Coated M.S Fabricated box with 3F x 2F x 6 Inch Connection, marking on Bakelite sheet suitable for table mounting Consist , of Following Accessories :- DC Voltmeter 300VDC (96*96mm) , DC Ammeter 10ADC (96x96mm) AC Voltmeter 0-500VAC , (96x96) AC Ammeter 10AAC (96*96mm) MCB 16Amp (DP) Variable, Auto Transformer 8 Amps , Single Phase , open Indicating Lights, Educational type insulated terminals.

Offering Ac & Dc Servo Motors.1. Lower mechanical time constant. 2. Lower electrical time constant. 3. Permanent magnet of high flux density to generate the field. 4. Fail-safe electro-mechanical brakes

Offering Tricycle Motor Controller. 60v72v 1800w brushless trike motor controllerThis is a powerful brushless dc controller for 1800w bldc motor.The 60v controller specification:Numbers of Mosfet tube:36size:28.5CML*14CMW*7CMHWeight:3.4kgRated voltage:60VRated power:1800Wcut off volage:52V1VVoltage to throttle:1V to 4.2VMax current:90A1Aphase angle:120

Offering DC Drives.Advantages of DC motor & drive1. Ease of control 2. Delivers high starting torque 3. Near linear performanceSERVICE CONDITIONSENCLOSURE : Chassis ( panel mount ) With Acrylic coverHORSEPOWER RATINGS : 1/8HP to 3HP, 10 HP two phase, 20 to 150 HP Three phase.INPUT : 240VAC , 1 phase , 50/60 Hz , 415 v two phase, or three phase for drives above 20 HP .LINE VOLTAGE VARIATION : +/- 10LINE FREQ VARIATION: 48 - 62 HzFIELD SUPPLY : 5A MaAMBIENT TEMPERATURE: 0 to 55 degree celciusSPACE REQUIREMENT: 180 X 200 X 70 mm.FEATURES MODE OF CONTROL: Speed or torque regulation ( optional)SPEED ADJUSTMENT: By PotentiometerOPERATING VOLTAGE: 120V or 240VCURRENT LIMIT LEVEL: settable upto max of 150% of rated currentREGULATED CONTROL POWER SUPPLY .dv / dt PROTECTION.OPTIONAL ISOLATED ARMATURE FEEDBACK

We are offering DC MOTORS (.5 HP to 15 HP)Specifications:Permeability steel especially used to make yokeBearings in large size for trouble free and longer life operationsSuperior quality silicon used for armature stampingDurable quality fans are used for coolingFor the nonstop performance, copper conductors are made with high quality insulated materials.Field windings and armatures are impregnated with vacuum pressure for the best insulation strengthTo ensure the low noise, off center rotor construction is in dynamic balance.Uniform/constant pressure brush holdersLoading pulley as well as armature should be dynamically balancedTerminal box fixed with all terminals properlyStrong base frame in C.P. handle, heavy duty bolt and perfect spring of dial type helps in accurate reading of machines.DC motors are ISS 4722 confirmedAvailable ratings: 220V/380V/440V, 0.5H.P TO 10 H.P.Types of windings: Shunt/Series/Compound type.

We are offering universal ic tester. Features1. Tests a wide range of digital ic's such as 74 series, 40/45 series of cmos ics.2. It can test microprocessor 3. It tests peripherals like 4. It tests a wide range of analog ics such as adc, dac, opamp, 555, transistor arrays, analog switches, waveform generator, line drivers, voltagesregulators, plls, vco, pwm generator, sample &hold, voltages references, opto couplers, comparators, voltages followers and others.5. It tests seven segment display of common cathode &common anode type6. It has auto search facility for digital ics.7. Test by: truth table / sequence table comparison. Analog ics.8. Keys: 50 cherry keys key pad with numerical & functional keys.9. Display: 16x2 backlit lcd display.

Offering Stepper Motors. This hybrid bipolar stepping motor has a 1.8 step angle (200 steps/revolution). Each phase draws 670 mA at 4.5 V, allowing for a holding torque of 950 g-cm (13 oz-in). The motor has four color-coded wires terminated with bare leads: black and green connect to one coil; red and blue connect to the other. It can be controlled by a pair of suitable H-bridges (one for each coil), but we recommend using a bipolar stepper motor driver.Our 5mm universal mounting hub can be used to mount objects on the stepper motors 5mm-diameter output shaft.SpecificationsSize: 28 mm square 45 mm, not including the shaft (NEMA 11)Weight: 140 g (5 oz)Shaft diameter: 5 mmSteps per revolution: 200Current rating: 670 mA per coilVoltage rating: 4.5 VResistance: 6.8 Ohm per coilHolding torque: 950 g-cm (13 oz-in)Inductance: 4.9 mH per coilLead length: 12 in

Offering Servo Motors Drives.4 dc motor driver board 2 stepper motor 4 servo motor steering gear drive module intelligent barrow load.

We are offering pneumatic trainer kit. Technical specifications:pressure gauge : 0-10 kg/cm2and 0-150 psiinput supply : 230 volts ac 50 hzsingle acting cylinder : stroke length of 54 cm diameter 32mm , port size 1/8 inchoperating pressure 0.5-8 kg/cm2the board consists of the following built-in parts:1) double acting cylinder stroke length of 100 cm2) frl 5/2 hand lever valve3) 3/2 push button valve , diameter 32mm, port size 1/4 inch, operating pressure 0.5-8 kg/cm24) single solenoid valve, 5/2 way valve, direct acting, 5) pressure 1.5 -8 kgf/cm2, 6) operating voltage 220 v ac at 50 hz7) indicator light neon light red8) pilot valve9) roller lever valve10) timer solenoid valve 5/2 way valve direct acting, pressure 1.5 -8 kgf/cm 2, operating voltage 220 v ac at 50 hz, timer spec11) on timer 0 -10 sec12)air filter, regulator & lubricator unit (frl unit) 0-10 kg/cm213)hand lever operated valves 5/2 way valve14) pilot operated valve 5/2 way valve15)port size 1/4 bsp f pressure 0-10 bar16) roller lever valve 3/2 way valvedesign spool typeport size 1/4 bsp fflow / speed control valvepressure 0-10 bar.

Offering AC drives..5 HP to 10 HP ac Drives and VFD.

We are offering dc rectifier unit. Transformer rectifier unit 0-300 vdc variable 230 v const. 0.100a dcthe transformer rectifier unit is designed to give unregulated 230 v dc output voltage from 3 phase mainssupply. The panel consists of transformer and rectifier units with accessories. The unit is designed to givecontinuous rated output current without excessive heating, as the unit is natural air cooledthe panel comprises of indicating lamps, output metering, input output switches and protection devices. The panel is designed to supply dc output mainly for dc motors. The ripple voltage is less than 5% so thatdc motors are working smoothly. The control panel is fabricated, powder coated suitable for transformer andrectifier units. The rectifier unit is simple, robust and easy for operation. The tap changing facility is providedon primary side transformer so that variation in supply mains can be adjusted to give output voltage inspecified limits.

We are offering iti tools & lab instruments. we are an iso 9001:2008 certified organization; engaged in offering testing measuring lab, basic electronic lab, we are the manufacturer & supplier of1) electrician2) fitter3) welder4) diesel mechanic5) plumber6) wire men8) electrical engineering9) electronic mechanic10) electronics & communication engineering12) power systems lab13) power electronics14) microprocessor, micro controller & plc trainer15) pneumatic & hydraulic trainer16) plc trainer.