This automatic Tube Finishing Machine is suitable for finishing textile yarn carriers like DTY and POY tubes and fitted with automatic tube transfer mechanism.

Our Automatic Core Cutter is used to re-cut jumbo length cores into smaller size cores.

This machine is very ideal for users of paper cores like paper mills, newsprint mills, BOPP Film manufacturers, converters etc. who can reduce their inventory and hassles of buying cores in different lengths from core manufacturers. They can stock jumbo length cores and cut into required lengths suiting their production plans using this core cutter.

This machine is fitted with suitable safety devices for operator's protection. The core cutter is simple to operate and maintain.

Output : Up to 6 cuts per minute depending upon the sizes and widths (or) approx. 6000 jumbo cores / day

• Paper Cores for winding fax rolls, telex rolls, toilet tissue paper, newsprint, kraft paper etc.
• Packaging Cores to wind BOPP tapes, polyester films, metalized foil etc.
• Textile Yarn carrier for POY winding, DTY winding, open-end spinning, fabric and jute winding, non-woven fabrics, carpet yarn winding.
• Others - Thermo-couple tubes, electronic cores, civil construction cores, storage tubes, pyrotechnic cores and mailing tubes.

The main salient feature of this production line is its high performance with low maintenance cost . The composite cans making machinery comes with other optional equipment for producing composite cans. The other major parts of composite can production line include labelling machine, can flanger and can seamer. The composite can production line facilitates easy interchangeability of toolings for various sizes of cans.

Output : Up to 30 pieces per minute depending upon size and operator's efficiency (or) approx. 35, 000 cans/day depending upon the sizes

To make flanging at the ends of the can for firm holding and crimping of the lid.

This machine is used to fix the metal rings with the top & bottom of the drum and seamed to hold firmly with body.

This production line is used to manufacture cylindrical Fibre Drums using Kraft Board. These drums are used to pack bulk drugs, chemicals, dyes, pharmaceuticals, engineering, consumer goods, adhesives etc. In Textile Mills the fibres are also transported through these drums. Fibre Drums are the most preferred option wherever there is a need for a cost-effective, light weight but strong packing material. This machine is used to manufacture spirally wound paper tubes using various plies and glue.

This machine is used to make liquid pulp from waste paper.

The machine is ruggedly built to withstand fluctuating heavy pulping loads and the walls are made of mild steel with rust preventive coatings. The special material used in cutter (Impeller) ensures aggressive cutting action with less input of power and time. The cutter is operated by an electric motor. Optional Automatic waster paper conveyor can be attached to pulper.

Capacity of the Pulper: To pulp waste paper up to 200 kgs/hour depending on the raw material

This machine is used to make pulp from waste paper.

The machine is ruggedly built to withstand fluctuating heavy pulping loads and the walls are made of mild steel with rust preventive coatings. The special material used in cutter (Impeller) ensures aggressive cutting action with less input of power and time. The cutter is operated by an electric motor. Optional Automatic waster paper conveyor can be attached to pulper.

The On-Line Drier is used to dry the products and delivers out the same through the conveyor. The On-Line Drier is of tunnel type having independent metal trays coated with heat resistant coating and holders operated by automatic indexable conveyorised chain. The conveyor is of multi-pass system to save energy, space and investment. The whole chamber is made in a strong fabricated structure and the walls are insulated to have minimum radiation loss. Both sides of the Drier can be opened easily for general maintenance and inspection. The inner walls and ducts are protected with heat resistant paint for long life. A safety clutch is provided to prevent any major accident while in operation.

This machine is used to add smooth finish and presentation to the trays. The machine is simple to operate and maintain and the output is synchronised with main moulding machine.

• Paper Edge Protector size : Minimum 25 x 25 mm, Maximum 75 x 75 mm
• Wall thickness : Minimum 2 mm, Maximum 3 mm. Depending upon size
• Parent Edge Protector length : Minimum 200 mm, Maximum 4000 mm (more length on special order)
• Motor : 1.5 KW (2 HP)
• Production speed : Upto 35 metres / minute depending upon the size
• Thickness adjusting mechanism
• Collection stand for notched edgeboards
• Operator : 1 Person

Depending upon the application, the specification of the cone varies. The popular sizes in the present Textile Industries are 9 Deg 15', 5 Deg 57', 4 Deg 20', 3 Deg 30', etc.

In all yarn winding application, tension at the traverse extremes pulls yarn towards the cone centre. So we have to provide suitable surface finish to the cones like Embossing, Velvet Finishing, etc.

Composite Containers are designed to suit the individual requirements of end users with distinct unique graphic designs and the most attractive sales appeal for shelf/retailing, special protection to the contents, convenient handling with suitable handles.

For brand enhancement and visual impact at the point of purchase, composite containers offer an eye-catching, cost-effective and environmentally acceptable way to display, package and protect product.

Edge Protectors made of kraft board layers are used for product protection, warehousing and transit needs. Paper edgeboards to protect sides of products shipped in pallets. Wrap-around edge protectors are ideal for protection of edges of circular goods like paper rolls, aluminium foil etc.

We are the manufacturers of Paper Conical Bolt Boxes (Construction cones) in waxed & unwaxed surface.We can Supply you in various sizes especially in the following dimensions.

Different sizes available:

70 x 25 x 229 mm lg92 x 29 x 305 mm lg108 x 30 x 380 mm lg108 x 30 x 457 mm lg119 x 30 x 534 mm lg133 x 30 x 610 mm lg165 x 30 x 762 mm lg

Applications :

A Conical Waxed Card Board tube is used for Positioning (Holding down) bolts.

Special Features :

Conical Bolt Box are Cheaper than Plastic Cones & Environment Friendly.A waxed Card Board Cone can be cut away when no longer required.

This automatic Tube Finishing Machine is suitable for finishing textile yarn carriers like DTY and POY tubes and fitted with automatic tube transfer mechanism.

Our Automatic Core Cutter is used to re-cut jumbo length cores into smaller size cores.

This machine is very ideal for users of paper cores like paper mills, newsprint mills, BOPP Film manufacturers, converters etc. who can reduce their inventory and hassles of buying cores in different lengths from core manufacturers. They can stock jumbo length cores and cut into required lengths suiting their production plans using this core cutter.

This machine is fitted with suitable safety devices for operator's protection. The core cutter is simple to operate and maintain.

Output : Up to 6 cuts per minute depending upon the sizes and widths (or) approx. 6000 jumbo cores / day

• Paper Cores for winding fax rolls, telex rolls, toilet tissue paper, newsprint, kraft paper etc.
• Packaging Cores to wind BOPP tapes, polyester films, metalized foil etc.
• Textile Yarn carrier for POY winding, DTY winding, open-end spinning, fabric and jute winding, non-woven fabrics, carpet yarn winding.
• Others - Thermo-couple tubes, electronic cores, civil construction cores, storage tubes, pyrotechnic cores and mailing tubes.

The main salient feature of this production line is its high performance with low maintenance cost . The composite cans making machinery comes with other optional equipment for producing composite cans. The other major parts of composite can production line include labelling machine, can flanger and can seamer. The composite can production line facilitates easy interchangeability of toolings for various sizes of cans.

Output : Up to 30 pieces per minute depending upon size and operator's efficiency (or) approx. 35, 000 cans/day depending upon the sizes

To make flanging at the ends of the can for firm holding and crimping of the lid.

This machine is used to fix the metal rings with the top & bottom of the drum and seamed to hold firmly with body.

This production line is used to manufacture cylindrical Fibre Drums using Kraft Board. These drums are used to pack bulk drugs, chemicals, dyes, pharmaceuticals, engineering, consumer goods, adhesives etc. In Textile Mills the fibres are also transported through these drums. Fibre Drums are the most preferred option wherever there is a need for a cost-effective, light weight but strong packing material. This machine is used to manufacture spirally wound paper tubes using various plies and glue.

This machine is used to make liquid pulp from waste paper.

The machine is ruggedly built to withstand fluctuating heavy pulping loads and the walls are made of mild steel with rust preventive coatings. The special material used in cutter (Impeller) ensures aggressive cutting action with less input of power and time. The cutter is operated by an electric motor. Optional Automatic waster paper conveyor can be attached to pulper.

Capacity of the Pulper: To pulp waste paper up to 200 kgs/hour depending on the raw material

This machine is used to make pulp from waste paper.

The machine is ruggedly built to withstand fluctuating heavy pulping loads and the walls are made of mild steel with rust preventive coatings. The special material used in cutter (Impeller) ensures aggressive cutting action with less input of power and time. The cutter is operated by an electric motor. Optional Automatic waster paper conveyor can be attached to pulper.

The On-Line Drier is used to dry the products and delivers out the same through the conveyor. The On-Line Drier is of tunnel type having independent metal trays coated with heat resistant coating and holders operated by automatic indexable conveyorised chain. The conveyor is of multi-pass system to save energy, space and investment. The whole chamber is made in a strong fabricated structure and the walls are insulated to have minimum radiation loss. Both sides of the Drier can be opened easily for general maintenance and inspection. The inner walls and ducts are protected with heat resistant paint for long life. A safety clutch is provided to prevent any major accident while in operation.

This machine is used to add smooth finish and presentation to the trays. The machine is simple to operate and maintain and the output is synchronised with main moulding machine.

• Paper Edge Protector size : Minimum 25 x 25 mm, Maximum 75 x 75 mm
• Wall thickness : Minimum 2 mm, Maximum 3 mm. Depending upon size
• Parent Edge Protector length : Minimum 200 mm, Maximum 4000 mm (more length on special order)
• Motor : 1.5 KW (2 HP)
• Production speed : Upto 35 metres / minute depending upon the size
• Thickness adjusting mechanism
• Collection stand for notched edgeboards
• Operator : 1 Person

Depending upon the application, the specification of the cone varies. The popular sizes in the present Textile Industries are 9 Deg 15', 5 Deg 57', 4 Deg 20', 3 Deg 30', etc.

In all yarn winding application, tension at the traverse extremes pulls yarn towards the cone centre. So we have to provide suitable surface finish to the cones like Embossing, Velvet Finishing, etc.

Composite Containers are designed to suit the individual requirements of end users with distinct unique graphic designs and the most attractive sales appeal for shelf/retailing, special protection to the contents, convenient handling with suitable handles.

For brand enhancement and visual impact at the point of purchase, composite containers offer an eye-catching, cost-effective and environmentally acceptable way to display, package and protect product.

Edge Protectors made of kraft board layers are used for product protection, warehousing and transit needs. Paper edgeboards to protect sides of products shipped in pallets. Wrap-around edge protectors are ideal for protection of edges of circular goods like paper rolls, aluminium foil etc.

We are the manufacturers of Paper Conical Bolt Boxes (Construction cones) in waxed & unwaxed surface.We can Supply you in various sizes especially in the following dimensions.

Different sizes available:

70 x 25 x 229 mm lg92 x 29 x 305 mm lg108 x 30 x 380 mm lg108 x 30 x 457 mm lg119 x 30 x 534 mm lg133 x 30 x 610 mm lg165 x 30 x 762 mm lg

Applications :

A Conical Waxed Card Board tube is used for Positioning (Holding down) bolts.

Special Features :

Conical Bolt Box are Cheaper than Plastic Cones & Environment Friendly.A waxed Card Board Cone can be cut away when no longer required.