Tyre killer can be of two types depending on the usage and type.

One way Tyre Killer specifically designed for lower security applications, the range is incorporated with spring loaded spikes that are lowered by the movement and weight of the car in the right direction. However, if a vehicle attempts to pass over in the wrong direction, it results in creating multiple tyre punctures.

Hydraulic Tyre Killer is an electro hydraulically operated heavy duty spike barrier which rises above the ground level on giving a valid input signal and thus prevents unauthorized intrusions at entry/exit points of high security premises. When the tyre killer is in a lowered position the vehicles can pass through, thereby providing a good enhanced security blockage system. it is used to allow only the exit of vehicles from a supervised area but to prevent the entrance to unauthorized ones it is typically used for perimeter protection at the exit of companies, hotels, convention centres and similar. The lengths available are: 2.000 mm, 3.000 mm, 4.000 mm, 5.000 mm and 6.000mm

The housing and the blocking element of the Tyre Killer are designed in full core steel profile construction with TESCON 4S Coating, ensuring maximum safety against corrosion. The impact face of the Tyre Killer is impact resisting thick, sharp steel spikes to puncture the tyre and in fact is strong enough to break the axle of the vehicle. It transfers mechanical forces to reinforced concrete

Features

• Blocking Width of the tyre killer From 2.00 m to 6.00 m
• Blocking Height Heavy duty steel spike barrier, 475 mm high
• Electro Hydraulic Drive Unit Integrated within underground casing or separately inside lockable steel cabinet for outdoor installation max. 20 m distance from tyre killer

Tyre killer can be of two types depending on the usage and type.

One way Tyre Killer specifically designed for lower security applications, the range is incorporated with spring loaded spikes that are lowered by the movement and weight of the car in the right direction. However, if a vehicle attempts to pass over in the wrong direction, it results in creating multiple tyre punctures.

Hydraulic Tyre Killer is an electro hydraulically operated heavy duty spike barrier which rises above the ground level on giving a valid input signal and thus prevents unauthorized intrusions at entry/exit points of high security premises. When the tyre killer is in a lowered position the vehicles can pass through, thereby providing a good enhanced security blockage system. it is used to allow only the exit of vehicles from a supervised area but to prevent the entrance to unauthorized ones it is typically used for perimeter protection at the exit of companies, hotels, convention centres and similar. The lengths available are: 2.000 mm, 3.000 mm, 4.000 mm, 5.000 mm and 6.000mm

The housing and the blocking element of the Tyre Killer are designed in full core steel profile construction with TESCON 4S Coating, ensuring maximum safety against corrosion. The impact face of the Tyre Killer is impact resisting thick, sharp steel spikes to puncture the tyre and in fact is strong enough to break the axle of the vehicle. It transfers mechanical forces to reinforced concrete

Features

• Blocking Width of the tyre killer From 2.00 m to 6.00 m
• Blocking Height Heavy duty steel spike barrier, 475 mm high
• Electro Hydraulic Drive Unit Integrated within underground casing or separately inside lockable steel cabinet for outdoor installation max. 20 m distance from tyre killer