Kwatra Enterprises

Chandni Chowk, Delhi

Havells WHOJTTKARG06 CATV Co-axial Cables RG 6 (Foam) (90Mtr Pack)

Havells CATV Co-Axial Cables RG 6 Foam

Sizing and processing of conductor, insulated and braiding of Co-axial cables is done in precisely controlled manner on automatic modern machines to have optimum output.

Havells WHTTATEA1P40 Telecom Switch Board Cables Unarmoured 0.4mm ATC (90 Mtr Pack)

Havells Telecom Switch Board Cables Unarmoured 0.4mm ATC

Hard grade PVC insulation is used for long life and stable properties of cables, Staggered lays of twisted pairs are used to ensure minimum cross talk, Sizing and processing of conductor and insulated cores is done in precisely controlled manner on automatic modern machines to have optimum values of capacitance, capacitance unbalance, image and cross talk attenuation and characteristic impedence, Shielding is done to protect from outside / inter pair interference as per specific needs.

Havells CCTV Camera Cable

Havells CCTV cables are Designed & manufactured with best raw materials available world wide to transmit the complete & finest video frequency range, making them an excellent choice for CCTV, Picture quality along with power supply

Havells CCTV cables construction is consist of a RG-59 Coaxial Cu. Cables to ensure distortion or attenuation Free video signals and thus a clear picture over complete low frequency bandwidth of transmission and 3 "cores" are made of Annealed Tinned flexible Cu. conductor for proper solding/ jointing with CCTV camera & video equipment to ensure adequate "CURRENT" power supply to the equipment's.

Soldron 936A Soldering Station

Soldron 936 Temperature Controlled Analog Soldering Station

Station

ABS Body
Pre-Printed Set and Run Modes on panel
LED indicator (indicates temp. maintenance)
ESD safe

Soldering Iron

Temp. range - 200 degC - 450 degC
Needle Bit
Iron Supply 24 Volts / 60 Watts
Earthed
Easy Replaceable bits
Rubber grip for non-slippery use.
MCH heater for long life
Induction based heating element

Package Contains:

Station
Soldering Iron with Needle bit
Stand with Sponge for Soldering Iron
Spanner

15 WATTS/230 VOLTS Soldering Iron

OriNet Cat 6e Ethernet Cable -305 Meter
Operates at bandwidth up-to 250 MHz for CAT-6e. The cable meets the requirements of EIA/TIA 568 B.2 and ISO-11801

Pairs : Two Cores are twisted to form a pair. The lay of the pairs are chosen to minimize the cross talk, and structural return loss (SRL). The four pairs are further laid up. A separator between pairs is inserted in CAT-6e cable to minimize cross-talk between pairs at high frequencies.
Colour coding of Pairs :Pair 1 - WHITE - BLUE / BLUEPair 2 - WHITE - ORANGE / ORANGEPair 3 - WHITE - GREEN / GREENPair 4 - WHITE - BROWN / BROWNSheath : FR / FRLS / ZHFR / ROHS PVCPrinting : At every meter with sequential markingRip Cord : PP / PolyesterPacking : 100 mtr coils / 305 mtr wooden reels / 305 mtr tangle free cartons.Shielding :FTP: Aluminium mylar and polyester tape with ATC drain wire in contact with aluminium tape.STP: Aluminium mylar tape with copper / alloy braiding with 96%+ coverage with / without drain wire

- Display: LED Digital Screen

ESD Gloves is designed for use in particle sensitive, anti-static or electrostatic discharge (ESD) environment.

These gloves help protect both the worker and the component. User can prevent damaging static discharge with ESD gloves to help enhance your skills and safety.

ESD Gloves are worn with the intention of keeping oils from the skin off the circuit boards; however, other anti-static procedures must still be employed.

hot-melt sticks and hot-melt glue guns are used in the application of the adhesive

Industrial Grade Glue Stick 10 Inch long.
Total number of sticks in the package- 792
Total Weight - 20 Kgs

Dimensions: 2 X 3.25 FeetAn anti-static floor mat or ESD mat is an anti-static device that safeguards equipments from an electrostatic discharge (ESD).Example: Computer components that are sensitive to static electricity or ESD are motherboards, CPUs, expansion cards and memory devices.

C Series Power Contactor 3P(Ie: 9A), AC3 220V 3HP, Coil 220V 50/60HZ, Aux.:1N/O

Comprising of tools for general use like soldering iron Micro shear, Pliers, Tweezers, Brush holder Extractor, Wire Strippers etc.

- Easy to carry
- Perfect finish
- Resistant to rust
- Light weight

205mm, 8" Plier used for cutting edges of wires, cables, and gripping of desired shape of material.Made of steel EN-8

205mm, 8" Plier used for cutting edges of wires, cables, and gripping of desired shape of material.
Can be used on 40000 Volts D.C or 2800 Volts A.C
Made of steel EN-8

Made of Steel EN-9

- Type of Product Crimping Tool
- Non Insulated Material
- Capacity 0.5 to 6 mm
- Weight 400 g
- Return Policy Non Returnable

VIRAT-6 Crimping Tool-- Non Insulated Terminal Crimping Tools

- Accurately machined screw threads and nuts with spring jaws
- When pressure is applied, the stress is transferred through the steel hook jaw and adjusting nut to the handle jaw without any impact on the frame

Blade is made from high grade silicon manganese steel and is Magnetised to lift small screws.
Handle is design to give comfortable grip.

Screwdriver Kit of 7 Blades ( Flat Tip X 3, Phillips Tip x 3, Poker x 1 ), Extension x 1, PVC Handle with Neon Bulb x 1, total 9 pcs set

With flat and Phillips tips, this screwdriver set lets you perform most electrical, electronic and mechanical repair jobs without looking for other instruments.

Chrome vanadium steel manufactured 1/2 Inch square Drive spark plug socket

- Brand: JCB
- Thumb dial release for easy blade re-change
- Metal blade slide for positive blade positioning
- Magnet at the back offers safe storage on a toolbar/ metal surface when not in use
- Attractive yellow ABS plastic body

Die cast grease gun head with air release valve

Havells speaker cables are Designed & manufactured with best parameters to have best performance from the connected instruments.Picture quality along with power supply
Havells speaker cables are constructed with multi wire, bright annealed flexible bare electrolytic grade Cu. conductor and each core designed to easy identification with specially formulated and in house FR transparent Insulation with high value of oxygen and temperature index to ensure distortion or attenuation Free voice with very Low "dB" Loss.

Mastech M92A(H) Digital MultiMeter

Mastech Digital Multimeter, M92A (H) is a highly versatile device and comes with a number of interesting features like data hold, diode tests, hfe tests and auto power off. It is also equipped with a low battery indication and continuity checking with buzzer. The multimeter can make up to 1999 counts.

- DC Voltage Range (Volts): 200mV-1000V
- DC Voltage Accuracy: (0.5 percent +3)
- AC Voltage Range (Volts): 200mV to 700V;
- AC Voltage Accuracy: (0.8 percent +5)
- DC current range (Amp) 20uA - 10A;
- DC current accuracy (1.0 percent +5)
- AC current range (Amp) 20uA - 10A;
- AC current accuracy (1.8 percent +5)
- Resistance range (Ohm) 200 - 200M;
- Resistance accuracy (0.8 percent +3) - 5 percent

Mastech MS7282 professional multi-function process calibrator multimeter, this series of process calibrator multimeter is designed with exact current, voltage calibrator function and digital multimeter function, it is used for detecting and debugging automatic control equipment in industry scene.

Arbitrary Wave Function Generator, 25 MHz, 2 CH, Coloured LCD, USB+, Owon

Performance Specifications
Channel dual
Frequency Output 25MHz
Sample Rate 125MS/s
Vertical Resolution 14 bits
Waveform: Standard Waveform Sine, Square, Pulse, Ramp, and Noise
Arbitrary Waveform: Exponential Rise, Exponential Fall, Sin(x)/x, Step Wave, and others,
total 26 built-in waveforms, and other user-defined arbitrary waveforms

Frequency (resolution 32 bits)
Sine 1Hz - 25MHz
Square 1Hz - 5MHz
Pulse 1Hz - 5MHz
Ramp 1Hz - 1MHz
Noise 25MHz (-3dB) (typical)
Arb 1Hz - 10MHz

Amplitude: 1m Vpp - 10 Vpp (50), 1m Vpp - 20 Vpp (high impedance)
Resolution 1m Vpp or 14 bits
DC Offset Range (AD+DC) 5V (50), 10V (high impedance)
DC Offset Range Resolution 1mV
Load Impedance 50 (typical)

Arbitrary Waveform
Wave Length 2 pts to 8K pts
Sample Rate 125MS/s
Vertical Resolution 14 bits
Non-volatile Memory 26 waveforms
Modulation
Modulation Waveform AM, FM, PM, FSK, Sweep, and Burst
Modulation Frequency 2mHz to 20.00KHz (FSK 1Hz - 100KHz)
Counter
Function Frequency Period, +Width, -Width, +Duty, and -Duty
Frequency Range 100mHz - 200MHz
Frequency Resolution 6 digits/s
Input / Output
Display 3.9 inch (480 320 pixels) TFT LCD
Type
counter, external modulation input / output, external trigger input / output,
external reference clock input / output
Communication Interface USB host, USB device, RS232
Mechanical
Dimension (WHD) 235 110 295 (mm)
Weight (without package) 3.00 kg

ESD Slipper

Electrostatic discharge is defined as the transfer of charge between bodies at different electrical potential. Static dissipative footwear is designed to reduce the accumulation of excess static electricity by conducting body charge to ground, while maintaining a high enough level of electrical resistance

Push Buttons With Contact Elements Round Head Pilot Lamp (LED Bulb Replaceable) Red, AC/DC 220-240V

Push Buttons With Contact Elements Round Head Pilot Lamp (LED Bulb Replaceable) Red, AC/DC 220-240V

Automatic wire stripper and cutter with choice of 3 Blades for cutting and stripping Insulated Wires.

Multiple Lever system requires only one third effort to cut.
Strips the wire in just single operation.
Ranges of Wires Covered 1.95 mm, 5 mm, 6 mm Diameter.

Type of Product: Allen Short Series Key Set
Content Size: 1/16", 5/64", 3/32", 1/8", 5/32", 3/16", 1/4", 5/16", 3/8"
Material: Alloy Steel
Items in Pack: 9 Pcs

You can thoroughly clean the most ESD sensitive components without endangering the high charges as ordinary brushes can generate.

TONI BB2 battery box works well for wide variety of applications. From school projects to DIY experiments. Batteries not included.

Havells Heat Resistant Flame Retardant (HRFR) Cables Life Line Plus S3 HRFR Cables 0.5 Sqmm 1 Core (90Mtr Pack)

Dimensions 7inch longYou can thoroughly clean the most ESD sensitive components without endangering the high charges as ordinary brushes can generate.

Flux Cored Soldering wire 30/70 Tin/lead (Sn/Pb) which has a melting point between 180 and 190 C.

Please select Standard Wire Gauge (SWG) and Packaging Weight

Soldering wire 30/70 Tin/lead (Sn/Pb) which has a melting point between 180 and 190 C.

KE 900M-T-B Soldering BitCompatible bits 900 Series Soldering Stations- 936 937 938 960

Soldering Bit- 900 Series
Type- 900M-T-B
Compatible with Soldering Stations -900 Series
Long Life Bits

Type of Product Philips Single Head Screw Driver Bits
Item Code SBP 250
Grade IS 12168
Length (mm) 25.00
Size (mm) PH 0

TAPARIA Screw Driver Bits are:- Philips Head Screw Driver Bits - Accurately hardened & Tempered to 56-60 HRC. To withstand high torque and high wear resistance properties. Precisely machined Philips, Torx, Flat& Hexagon Tips. One of the widest range of quality Screw Driver Bits in India.