Our Products #4693401

This is a 6-Channel Programmable Timer with Latch Relay. Each channel can be set for time Delays of 10, 20 Or 30 seconds and can be latched. This can be used for generating potential free contact after the fault occurred. Features:1) Works on 12v24v DC power supply2) Time delay programming for individual channel @ 10, 20, 30 seconds3) Relay can be latched after the selected time delay4) Latch resetting through inbuiltexternal push button5) 510 Amps NO, NC contacts6) 5v, 12v digital input either low to high or high to low fault condition

Industrial battery chargers Precision Auto Float to Boost changeover through Voltage or Current or Time based method Mains ON delay to avoid Battery getting to Boost Mode frequently 12 hour Safety Timer to bring charger to Float when the battery is defective Status Monitoring through 20 LEDs Separate Battery Current Limit Diode Voltage Regulator to control Load Voltage in Boost Mode Suitable for NiCd , LMLA , VRLA batteries.

Class IClass B lightning arresters are mainly used in lightning protection zone (LPZ) 0 to 1, widely used in building entrance lines(such as distribution box), elevator, mineral, oil equipments, power transmission and so on. Class I lightning arresters adopt unique designed seal construction with multilayer spark gap, no spark emission outside the housing. Suitable for grounding system TN-C, TN-S, TT and IT. With working status indication window, and remote control contacts. High impulse discharge current, Iimp value is 25kA, 50kA -10350us.

Class IClass B lightning arresters are mainly used in lightning protection zone (LPZ) 0 to 1, widely used in building entrance lines(such as distribution box), elevator, mineral, oil equipments, power transmission and so on. Class I lightning arresters adopt unique designed seal construction with multilayer spark gap, no spark emission outside the housing. Suitable for grounding system TN-C, TN-S, TT and IT. With working status indication window, and remote control contacts. High impulse discharge current, Iimp value is 25kA, 50kA -10350us.

Class IClass B lightning arresters are mainly used in lightning protection zone (LPZ) 0 to 1, widely used in building entrance lines(such as distribution box), elevator, mineral, oil equipments, power transmission and so on. Class I lightning arresters adopt unique designed seal construction with multilayer spark gap, no spark emission outside the housing. Suitable for grounding system TN-C, TN-S, TT and IT. With working status indication window, and remote control contacts. High impulse discharge current, Iimp value is 25kA, 50kA -10350us.

Surge Protection Device Class IClass B lightning arresters are mainly used in lightning protection zone (LPZ) 0 to 1, widely used in building entrance lines(such as distribution box), elevator, mineral, oil equipments, power transmission and so on. Class I lightning arresters adopt unique designed seal construction with multilayer spark gap, no spark emission outside the housing. Suitable for grounding system TN-C, TN-S, TT and IT. With working status indication window, and remote control contacts. High impulse discharge current, Iimp value is 25kA, 50kA -10350us.

Class IClass B lightning arresters are mainly used in lightning protection zone (LPZ) 0 to 1, widely used in building entrance lines(such as distribution box), elevator, mineral, oil equipments, power transmission and so on. Class I lightning arresters adopt unique designed seal construction with multilayer spark gap, no spark emission outside the housing. Suitable for grounding system TN-C, TN-S, TT and IT. With working status indication window, and remote control contacts. High impulse discharge current, Iimp value is 25kA, 50kA -10350us.

Class IClass B lightning arresters are mainly used in lightning protection zone (LPZ) 0 to 1, widely used in building entrance lines(such as distribution box), elevator, mineral, oil equipments, power transmission and so on. Class I lightning arresters adopt unique designed seal construction with multilayer spark gap, no spark emission outside the housing. Suitable for grounding system TN-C, TN-S, TT and IT. With working status indication window, and remote control contacts. High impulse discharge current, Iimp value is 25kA, 50kA -10350us. Models: FV25B1-255s;FV50B1-255;FV25Bx-XXXS; FV50Bx-XXX Where x is no of poles and XXX represents various voltage levels

Class IClass B lightning arresters are mainly used in lightning protection zone (LPZ) 0 to 1, widely used in building entrance lines(such as distribution box), elevator, mineral, oil equipments, power transmission and so on. Class I lightning arresters adopt unique designed seal construction with multilayer spark gap, no spark emission outside the housing. Suitable for grounding system TN-C, TN-S, TT and IT. With working status indication window, and remote control contacts. High impulse discharge current, Iimp value is 25kA, 50kA -10350us.

Made up of GF NylonAvoids Corrosion on Bolts and NutsAvoids slackening and anti rotation of nutsRetro fitment without modifying existing arrangementNo grooving of existing nut is required

Programmable timer each channel can be set for time Delays of 10, 20 Or 30 seconds and can be latched. This can be used for generating potential free contact after the fault occurred.

Class IClass B lightning arresters are mainly used in lightning protection zone (LPZ) 0 to 1, widely used in building entrance lines(such as distribution box), elevator, mineral, oil equipments, power transmission and so on. Class I lightning arresters adopt unique designed seal construction with multilayer spark gap, no spark emission outside the housing. Suitable for grounding system TN-C, TN-S, TT and IT. With working status indication window, and remote control contacts. High impulse discharge current, Iimp value is 25kA, 50kA -10350us.