Chennai, Tamil Nadu, India
Our Products
Sheets/Plates/Flats/Coils
Grades : 302, 304, 304L, 309, 310, 310S, 316, 316L, 317, 317L, 321, 347, 904, 904L As per ASTM 240
Size :Thick 0.05 mm to 150 mmWidth (max) = 2500 mmLength = 12000 mm
Grades : 302, 304, 304L, 309, 310, 310S, 316, 316L, 317, 317L, 321, 347, 904, 904L As per ASTM 240
Size :Thick 0.05 mm to 150 mmWidth (max) = 2500 mmLength = in coil form.
Grades : AISI 302, AISI 304, AISI 304L, AISI 309/309S, AISI 310/310S, AISI 316/316L, AISI 317/317L, AISI 321, AISI 347, AISI 409, AISI 410/410S, AISI 420, AISI 430, AISI 434
Size : 1/8 to 36 N.B.(Nominal Bore)Thickness :SCH5 to XXSSize :1/8 to 36 O.D.(Outside Diameter)Thickness :0.5mm to 25mm
Also sizes as per special requirements can be supplied.
Hexs/Squares
Grades : 302, 304, 304L, 309, 310, 310S, 316, 316L, 317, 317L, 321, 347, 904, 904L as Per A 276, 479, 479M, uplex and Super Duplex of UNS 32205, UNS 31803, UNS 32750, andUNS32760.
Size : 5mm to 300mm DIA
Rods
Grades : 302, 304, 304L, 309, 310, 310S, 316, 316L, 317, 317L, 321, 347, 904, 904L as Per A 276, 479, 479M, Duplex and Super Duplex of UNS 32205, UNS 31803, UNS 32750, andUNS32760.
Size : 5mm to 600mm DIA
pipe fittings (seamless & erw)
1elbows - long and short radius2 bends - 2d, 3d, 4d, 5d, 6d, 8d, 10d3 reducers - eccentric and concentric4 tees - equal and unequal5 stubends, caps
grades : aisi 302, aisi 304, aisi 304l, aisi 309/309s, aisi 310/310s, aisi 316/316l, aisi 317/317l, aisi 321, aisi 347, aisi 409, aisi 410/410s, aisi 420, aisi 430, aisi 434
size : to 36 - butt weld.thickness : sch 5 to sch xxs
size : to 4 - socket weld.
also sizes as per special requirements can be supplied.
.
Slip On, Blind, Weld Neck, Threaded, Socket Weld, lap Joint, Plate Flanges
Grades : 302, 304, 304L, 309, 316, 316L, 317, 317L, 321, 347
Size : " to 36"
Thickness : Table D, E, F, H, ASA 150#, 300#, 600#, 900#, 2500#
Grades : 302, 304, 304L, 309, 316, 316L, 317, 317L, 321, 347
Size : 1.5mm to 16mm thickness
Width : upto 12"
T-sections/Angles/Channels
Grades : 302, 304, 304L, 309, 316, 316L, 317, 317L, 321, 347
Size : 1.5mm to 16mm thickness
Width : upto 12"
Applications
S.S. 301
This is an austenitic Stainless Steel used in manufacture of Automobile Trims, Conveyor Belts, Railway Coaches, Metal Fixtures, used in Construction Purposes, Storm Door Frames and Tableware
S.S. 304
This is an Austenitic Stainless Steel most widely used in many applications because of its excellent corrosion resistance. This Steel is used in Chemical, PetroChemical, Fertilizer, Pharmaceutical, Paper, Pulp, Textile, Food & Beverage Industries, as Containers in Dairy, used in manufacture of Kitchenware, Cutlery, Cryogenic Vessels and as heat exchangers.
S.S. 304L
This is generally used in place of S.S. 304 for enhanced resistance for inter-granular corrosion. It is used for parts and structures which cannot be heat treated for stress relieving after welding.
S.S. 310S
This is an austenitic type Stainless Steel which has higher Chromium and Nickel content. It has mechanical properties at higher temperature and has high strength. This is used in manufacture of Air Heaters, Annealing Boxes, Ovens, Carburising boxes, Furnace Linings, Gas Turbine Parts, Heat Exchangers, Kiln Linings, Nozzle diaphragm assemblies for Turbo jet Engines, Oil Burner Parts, Paper Mill Equipment, Oil Refinery Equipment, Recuperators etc.,
S.S. 316
This is an Austenitic Stainless Steel with 2 to 3% Mo, which enhances corrosion resistance against halogens and to divulge hot strength characteristics. Used for applications for resistance to deep hole corrosion and in halogen atmospheres. Applications : Architectural trims, Marine Exterios, Chemical Processing Equipment, Food Processing Equipment, Petroleum Refinery Equipment, Pharmaceuticals Equipment, Photographic equipment, Pulp and Paper Processing equipment, Textile Finishing equipment, Pollution Control etc.,
S.S. 316 L
It is used in place of S S 316 when enhanced weldability is required.
S.S. 321
This is an austenitic Stainless Steel similar to S.S. 304 but with Titanium to avoid Intr-Granular corrosion. It is used in aircraft exhaust stacks and manifolds, pressure vessels, large mufflers, for stationery diesel engines, Carburettors, Expansion bellows, Stack liners, Fire Walls, Super Heaters etc.,
S.S. 409/409
This is Ferritic Stainless Steel replaces Carbon Steels and low Alloy Steels where some amount of heat or corrosion resistance and higher strength is required. It is used in Heater Tubes, Transformer and Capacitor Cases, Dry Fertilizer spreaders, Automotive Exhaust systems, including mufflers, resonators, silencer pipes and emission control units, high pressure agricultural spray tanks, culverts, shipping containers, farm equipment etc.,
S.S. 410S
This has 12% Chromium content Stainless Steel with excellent combination of toughness and strenght. It is used in manufacture of Furnace Parts, Burners operating below 650oC, Micrometer Parts, Tray Supports, Caps and Vapor5isers in Petroleum Fractionating Towers, Lining for Reaction Chambers, Coal Screens, Fishing tachles, Keys, Lamp brackets, Rules and Tapes, Wall Screens, Steam Turbine buckets, blades, bucket covers, pumps parts, Chemical equipment, Press Plates etc.,
Chemical Composition
| Grade AISI |
Carbon (max) |
Manganes (max) |
Phosporous (max) |
Sulphur (max) |
Silicon (max) |
Chromium | Nickel | Molyb denum |
Other Element |
| 201 | 0.15% | 5.5% 7.5% |
0.06% | 0.03% | 1.0% | 16% 18% |
3.5% 5.5% |
-- | N-0.25% |
| 202 | 0.15% | 7.5% 10% |
0.06% | 0.03% | 1.0% | 17% 19% |
4.0% 6.0% |
-- | N-0.25% |
| 301 | 0.15% | 2.0% | 0.045% | 0.04% | 1.0% | 16% 18% |
6.0% 8.0% |
-- | -- |
| 302 | 0.15% | 2.0% | 0.045% | 0.03% | 1.0% | 17% 19% |
8.0% 10% |
-- | -- |
| 303 | 0.15% | 2.0% | 0.045% | -- | 1.0% | 17% 19% |
8.0% 10% |
-- | -- |
| 304 | 0.08% | 2.0% | 0.045% | 0.03% | 1.0% | 18% 20% |
8.0% 10% |
-- | -- |
| 304L | 0.03% | 2.0% | 0.045% | 0.03% | 1.0% | 18% 20% |
8.0% 10% |
-- | -- |
| 308 | 0.08% | 2.0% | 0.045% | 0.03% | 1.0% | 18% 21% |
10% 12% |
-- | -- |
| 309 | 0.2% | 2.0% | 0.045% | 0.03% | 1.0% | 22% 24% |
12% 15% |
-- | -- |
| 309S | 0.08% | 2.0% | 0.045% | 0.03% | 1.0% | 22% 24% |
12% 15% |
-- | -- |
| 310 | 0.25% | 2.0% | 0.045% | 0.03% | 1.5% | 24% 26% |
19% 22% |
-- | -- |
| 310S | 0.08% | 2.0% | 0.045% | 0.03% | 1.5% | 24% 26% |
19% 22% |
-- | -- |
| 316 | 0.08% | 2.0% | 0.045% | 0.03% | 1.0% | 16% 18% |
10% 14% |
2.0% 3.0% |
-- |
| 316L | 0.03% | 2.0% | 0.045% | 0.03% | 1.0% | 16% 18% |
10% 14% |
2.0% 3.0% |
-- |
| 317 | 0.08% | 2.0% | 0.045% | 0.03% | 1.0% | 18% 20% |
11% 15% |
3.0% 4.0% |
-- |
| 317L | 0.03% | 2.0% | 0.045% | 0.03% | 1.0% | 18% 20% |
11% 15% |
3.0% 4.0% |
-- |
| 321 | 0.08% | 2.0% | 0.045% | 0.03% | 1.0% | 17% 19% |
9% 12% |
-- | Ti5xC Min |
| 316TI | 0.08% | 2.0% | 0.045% | 0.03% | 1.0% | 16% 18% |
10% 14% |
2.0% 3.0% |
Ti5C |
| 347 | 0.08% | 2.0% | 0.045% | 0.03% | 1.0% | 17% 19% |
9% 12% |
-- | Nb/Ta 10xC |
| 403 | 0.15% | 1.0% | 0.04% | 0.03% | 0.5% | 11.5% 13% |
0.6% | -- | -- |
| 410 | 0.15% | 1.0% | 0.04% | 0.03% | 4% | 11.5% 13.5% |
0.6% | -- | -- |
| 414 | 0.15% | 1.0% | 0.04% | 0.03% | 1% | 11.5% 13.5% |
1.25% 2.5% |
-- | -- |
| 420 | 0.15% | 1.0% | 0.04% | 0.03% | 1% | 11.5% 13.5% |
0.6% | -- | -- |
| 430 | 0.12% | 1.0% | 0.04% | 0.03% | 1% | 14% 18% |
0.6% | -- | -- |
| 431 | 0.2% | 1.0% | 0.04% | 0.03% | 1% | 15% 17% |
1.25% 2.5% |
0.75% | -- |
| 440A | 0.6% 0.7% |
1.0% | 0.04% | 0.03% | 1% | 16% 18% |
-- | -- | -- |
| 440B | 0.75% 0.95% |
1.0% | 0.04% | 0.03% | 1% | 16% 18% |
-- | 0.75% | -- |
| 440C | 0.95%/ 1.2% |
1.0% | 0.04% | 0.03% | 1% | 16% 18% |
-- | 0.75% | -- |
| 446 | 0.2% | 1.5% | 0.04% | 0.03% | 1% | 23% 27% |
0.6% | -- | N.25% |
| 446 | 0.2% | 1.5% | 0.04% | 0.03% | 1% | 21% 23% |
-- | -- | -- |
Copper application areas cover a wide variety of different disciplines. Please check the specific areas that you are interested in to explore more in-depth information about each discipline.
Architecture
See the latest application of copper and copper alloy materials in all aspects of architecture, both exterior and interior .
Automotive
Copper is an essential component of many of the latest design elements in today's cars.
Electrical
Copper's high conductivity makes it the ideal material in a wide variety of electical applications including:
Grades :As per IS 4171-1966, BS 2874- C106, C107, C101
Size : 3mm to 315mm
Thickness : 0.5mm to 20 mm
Grades : BS 2874- C106, C107, C101As per ASTM B 75 Gr Annealed, Half hard, C10100, C10200, C10300, C10800, C12000, C12200, C14200
Temper Designation : H55, H58, H80, 060, 050
Thickness: 0.4mm to 3 mmSize : 3mm to 22mm
Grades : Commercial & Electrolytic quality
Size : 2'x2', 4'x4', 4'x8', 14"x48"
Thickness : 0.05mm to 100mm
Also Sizes as per Special requirements can be supplied
Grades : Commercial & Electrolytic quality
Size : 12mm to 200mm width
Thickness : 0.5mm to 50mm
Grades : As per IS 4171-1966, BS 2874- C106 (Phosphorous dioxidised non arsenical), C109 (Tellurium Copper), NS101 (Nickel Silver Alloy), High Resistance Wear res. (Cadmium Copper)
Size : 12mm to 140mm
Applications
High conductivity free machining Copper Rods(Leaded copper)
Threaded machine components, parts require high conductivity, extensive machining and corrosion resistance, electrical connectors, motor switch components etc.,
Tellurium Copper - Grade: BS 2874C109
Threaded machine components, parts require high conductivity, extensive machining corrosion resistance, electrical connectors, motor, switch components, require high softening temperature.
Copper-Nickel-Alloy Rod - Grade: ASTM B: 411-64
components require very high strength and wear resistance qualities
Copper Rods & Tubes for general engg Purpose - Grade: IS 4171-1966 BS 2874-C106
Condensers, evaporators and other heat exchanger tubes, Brewery tubes, gas lines, oil burner tubes, steam, water, vapour lines etc.,
High Conductivity Electrolytic Copper Rods and Tubes
Electrical conductors, switches, terminals, gaskets, radiators, cotter pins, nails, rivets, tubes etc., require high electrical thermal conductivity
Brasses are copper zinc alloys with a wide range of engineering uses. The addition of zinc to copper raises the strength and gives a range of properties, and the brasses are a very versatile range of materials. They are used for their strength, corrosion resistance, appearance and colour, and ease of working and joining. The single phase alpha brasses, containing up to about 37% zinc, are very ductile and easy to cold work, weld and braze. The dual phase alpha-beta brasses are usually hot worked.
There are many brasses, with properties tailored for specific applications by the level of addition of zinc. Minor amounts of other alloying elements may also be added.
Corrosion Resistance of Brass
Brasses are resistant to corrosion in many media. Please consult Austral Wright Metals for detailed advice on your application. Brasses are particularly susceptible to corrosion by solutions containing ammonia or amines. Alloys with more than about 15% of zinc may suffer dezincification, which leaves a weak, porous corrosion deposit of copper. Resistance to dezincification is greatly reduced by the addition of a small amount of arsenic to the alloy. Stress corrosion cracking, particularly by ammonia and amines, is also a problem with the brasses. Alloys containing more than about 15% zinc are most susceptible. Use of the annealed temper, and annealing or stress relieving after forming, reduces susceptibility to stress corrosion cracking.
Grades : As per IS 407 and Commercial quality. For General purpose, Heat exchanger tube, Condenser & ferrule tube, Annealed Brass tube for gas installation for sugar Industries.
Size : 6.3mm to 102mm O.D.
Thickness : 0.5mm to 12mm
Grades :As Per IS 410 cuzn 37, cuzn 30, cuzn 20 Also Commercial grade
Size : 14"x48", 4'x4' & 4'x8'
Thickness : 0.05mm to 50mm
Also sizes and shapes as per special requirements can be supplied.
Free Cutting Brass Rods
Grades : As per ASTM B16/16M, BS 2874-CZ124
Size : 6mm to 100mm Dia.
Naval Brass Rods (Forging Quality)
Grades : As per IS 291-1961 Gr-1 BS 2874/1969 CZ 112
Size : 6mm to 100mm Dia.
High tensile (IS320), Leaded (IS3488-66), Forging Brass Rods also available.
Applications
Machining & General purpose Brass Rod - Grade:as per IS 291-1961 Grade 2 BS 2874-1969 CZ 113
Condenser plates, piston rods, nuts, bolts, rivets, marine machined Hardware not in forging operation
High Tensile Brass Rods - Grade: as per BS 2874-1969 CZ114
Clutch dies, Pump rods, shafts, valve stems & bodies, welding rods, Components require high strength and execellent resistance to corrosion
Leaded Brass Rods: (Drilling & Turning Quality) - Grade: as per MS 53-DIN 1756
For machined components manufactured at high speeds on shaping or milling machines which are not subjected to bending.
Brass Tubes - Grade:
IS 407-1966(Alloy2) Heat Exchangers.
Pipes
Round, Rectangle, Square, Drawn & Extruded
Grades: 3003, 6061, 6063
Size : Upto 323 mm
Thickness:30mm (max)
| Alloy | IS | AA |
| 1S | 19500 | 1050 |
| C1S | 19600 | 1350 |
| 2S | 19000 | 1200 |
| 3S | 31000 | 3003,3103 |
| B26S | 24345 | 2014 |
| 50S | 63400 | 6063 |
| D50S | 63401 | 6101 |
| B51S | 64430 | 6082,6351 |
| M57S | 52000 | 5053,5251 |
| C62S | 64423 | 6066 |
| D65S | 65032 | 6061 |
| Alloy | IS | AA |
| 1S | 19500 | 1050 |
| C1S | 19600 | 1350 |
| 2S | 19000 | 1200 |
| 3S | 31000 | 3003,3103 |
| B26S | 24345 | 2014 |
| 50S | 63400 | 6063 |
| D50S | 63401 | 6101 |
| B51S | 64430 | 6082,6351 |
| M57S | 52000 | 5053,5251 |
| C62S | 64423 | 6066 |
| D65S | 65032 | 6061 |
Applications
Space Technology, Aircraft, Defence, Road and Rail products, Automotive solutions and components, Pharmaceutical packagings, Food and Beverage packagings, Scientific products, Cables, Fasteners.
| Alloy | IS | AA |
| 1S | 19500 | 1050 |
| C1S | 19600 | 1350 |
| 2S | 19000 | 1200 |
| 3S | 31000 | 3003,3103 |
| B26S | 24345 | 2014 |
| 50S | 63400 | 6063 |
| D50S | 63401 | 6101 |
| B51S | 64430 | 6082,6351 |
| M57S | 52000 | 5053,5251 |
| C62S | 64423 | 6066 |
| D65S | 65032 | 6061 |
Hex Head Bolts, Raised Counter Sunks, Wood Screws, Slotted and Cross recessed.Hex Head Screws, Hexagon socket cap screws, Hex socket counter Screws, Slotted cheese head machine screws, Slotted counter sunk head machine screws, slotted raised counter sunk head machine screws.
Grades: As per BS & DIN standards, AISI 304, 316, 316L
Size : 1.6mm to 2" Dia
Length: 4mm to 1000mm
Flange Nuts/Locking Nuts
Grades As per BS & DIN standards, AISI 304, 316, 316L
Size : Dia : 1.6mm to 2"
Nyloc Nuts/Nyloc Flange Nuts
Grades As per BS & DIN standards, AISI 304, 316, 316L
Size : Dia : 1.6mm to 2"Whell Nuts
Grades As per BS & DIN standards, AISI 304, 316, 316L
Size : Dia : 1.6mm to 2"
Hexagon Full Nuts, Hexagon Thin Nuts (Lock Nuts), Nylon insert self locking nuts, Spring washers, plain washers, Threaded Rods, Stud Bolts, Pins, Cotter pins.
Applications
Space Technology, Aircraft, Heavy and medium Engineering units, Automobiles, Wind Mills, Home albums, continous Process Plants like Petrochemical, Refinery, Fertilizer, Food Processing Plants, Railways, Power Generation and Distribution Establishments and Defence establishments.
Grades: ASTM A333/1, ASTM A333/6, ASTM A334/1, ASTM A334/6, ASTM A335/P1, ASTM A335/P2, ASTM A335/P5, ASTM A335/P11, ASTM A335/P12, ASTM A335/P22
Nickel Alloys
Nickel Base Alloys like Nickel 200, Nickel 201, Nickel 205, Nickel 212, Nickel 222, Nickel 270
We are a renowned trader and supplier of Nickel Alloys (FTA Approved) that is beryllium free and is highly effective with various ceramics. Nickel alloy has a good bonding and long lasting properties. We have a very feasible price range which makes our products available at very affordable prices. Nickel alloy can be availed from us within the stipulated period of time. Nickel is being procured after testing the quality as per international standards.
Like Monel Alloy 400, Monel Alloy K - 500, Cast Monel Alloy Pig (oxidised), Inconel Alloy 600, Inconel Alloy 625, Inconel Alloy 800, Inconel Alloy 825, Inconel Alloy 904, Inconel Alloy DS, Nimonic, Hastalloy and Ferrous & Non Ferrous Metals like Aluminium Bronze, Titanium, Lead, Zinc, Tin, Babit Metal, Silver, Beryllium, Cobalt, Indium, Iridium, Tantulum, Vanadium, Cadmium, Zirconium, Non - Ferrous casting Alloys like Gun Metal, Gun Metal Admirality, Leaded Bronze, Leaded Phospor Bronze, Manganese Bronze or High Tensile Brass, Silicon Bronze.
