Autoclaved Aerated Concrete Block Making Machine is becoming more and more popular around the world, from western countries and then to developing countries.
We are pioneer supplier of Autoclaved Aerated Concrete Block Machinery with turnkey solution. AAC Blocks are made to aerate by creating a reaction between Fly Ash, Lime and Aluminum Powder. The block hardness is achieved by cement strength and instant curing mechanism by autoclaving.
AAC Blocks have unmatchable property, especially for high buildings:
1) Extreme Light Weight
2) Large Variety of Sizes
3) High Fire Resistant
4) Excellent Thermal Insulation
5) Great Sound Insulation
With the rise in population and increase in constructional activities considering the improvement in the standard of living the demand for building bricks is increasing day by day.
Features of AAC Block Machinery:
• AAC’s excellent thermal efficiency makes a major contribution to environmental protection by sharply reducing the need for heating and cooling in buildings.
• AAC’s easy workability allows accurate cutting, which minimizes the generation of solid waste during use. Unlike other building materials, AAC can eliminate the need to be used in combination with insulation products, which increase the environmental impact and cost of construction.
• AAC’s high resource efficiency gives it low environmental impact in all phases of its life cycle, from processing of raw materials to the disposal of AAC waste.
• AAC’s light weight also saves energy in transportation. The fact that AAC is up to five times lighter than concrete leads to significant reductions in CO2 emissions during transportation. In addition, many AAC manufacturers apply the principle of producing as near to their consumer markets as possible to reduce the need for transportation.
Technology Flow Of Production Autoclaved Aerated Concrete Block:
1) First, dose and match measured raw materials.
2) After distributing, feed raw material into pouring mixer to make slurry.
3) Through thoroughly mixing, the slurry is poured to mould.
4) After pre-curing under a certain temperature and time, the block would reach a certain hardness prepare for cutting.
5) Tilting hoister would turn over 90 degree of mould.
6) Then open the mould and separate it from block, and take the block with side plate to cutting cart.
7) The blocks then be cut through the cutter firstly of two vertical sides of block.
8) Secondly the horizontal cutting
9) Finally the vertical cutting
10) After cutting, the block is hanged to trolley with side plate by semi-finished product hoister
11) Organizing the cut blocks and put them into autoclave
12) Hardening the blocks under certain temperature and pressure
13) Take finished products out of autoclave
14) The finished product hoister take the finished product to stock shield
15) Packed for loading
16) The side plate return back by side plate roller
17) Side plate would be organized with open mould
18) Clean the mould and preparing for next pouring.
Autoclaved Aerated Concrete Block Line Advantages:
1. Environmental friendly : Consumes Fly ash
2. Environmental friendly : Saves invaluable top soil
3. Environmental friendly : needs no burningbacking
4. Strength : Higher Strength Bricks.
5. Uniform Shape : Easier and faster Brick working.
6. Uniform Shape : Less Mortar in Brick work.
7. Uniform Shape : Less Mortar in Plaster.
8. Natural Concrete : Gains strength over time.
9. Natural Concrete : Walls can be left exposedun plastered.
10. Light weight : Faster and easier transportation
11. Light weight : Faster and easier brickwork
12. Light weight : saves structural concrete by 35%
13. Better heat & sound insulation compared to red Bricks
14. Far Lesser breakage during handling & transportation.
15. Better Vibration resistance compared to red Bricks.
More Details Call Our Toll Free No :- 1800 200 11 71

Autoclaved Aerated Concrete Block Making Machine is becoming more and more popular around the world, from western countries and then to developing countries.
We are pioneer supplier of Autoclaved Aerated Concrete Block Machinery with turnkey solution. AAC Blocks are made to aerate by creating a reaction between Fly Ash, Lime and Aluminum Powder. The block hardness is achieved by cement strength and instant curing mechanism by autoclaving.
AAC Blocks have unmatchable property, especially for high buildings:
1) Extreme Light Weight
2) Large Variety of Sizes
3) High Fire Resistant
4) Excellent Thermal Insulation
5) Great Sound Insulation
With the rise in population and increase in constructional activities considering the improvement in the standard of living the demand for building bricks is increasing day by day.
Features of AAC Block Machinery:
• AAC’s excellent thermal efficiency makes a major contribution to environmental protection by sharply reducing the need for heating and cooling in buildings.
• AAC’s easy workability allows accurate cutting, which minimizes the generation of solid waste during use. Unlike other building materials, AAC can eliminate the need to be used in combination with insulation products, which increase the environmental impact and cost of construction.
• AAC’s high resource efficiency gives it low environmental impact in all phases of its life cycle, from processing of raw materials to the disposal of AAC waste.
• AAC’s light weight also saves energy in transportation. The fact that AAC is up to five times lighter than concrete leads to significant reductions in CO2 emissions during transportation. In addition, many AAC manufacturers apply the principle of producing as near to their consumer markets as possible to reduce the need for transportation.
Technology Flow Of Production Autoclaved Aerated Concrete Block:
1) First, dose and match measured raw materials.
2) After distributing, feed raw material into pouring mixer to make slurry.
3) Through thoroughly mixing, the slurry is poured to mould.
4) After pre-curing under a certain temperature and time, the block would reach a certain hardness prepare for cutting.
5) Tilting hoister would turn over 90 degree of mould.
6) Then open the mould and separate it from block, and take the block with side plate to cutting cart.
7) The blocks then be cut through the cutter firstly of two vertical sides of block.
8) Secondly the horizontal cutting
9) Finally the vertical cutting
10) After cutting, the block is hanged to trolley with side plate by semi-finished product hoister
11) Organizing the cut blocks and put them into autoclave
12) Hardening the blocks under certain temperature and pressure
13) Take finished products out of autoclave
14) The finished product hoister take the finished product to stock shield
15) Packed for loading
16) The side plate return back by side plate roller
17) Side plate would be organized with open mould
18) Clean the mould and preparing for next pouring.
Autoclaved Aerated Concrete Block Line Advantages:
1. Environmental friendly : Consumes Fly ash
2. Environmental friendly : Saves invaluable top soil
3. Environmental friendly : needs no burningbacking
4. Strength : Higher Strength Bricks.
5. Uniform Shape : Easier and faster Brick working.
6. Uniform Shape : Less Mortar in Brick work.
7. Uniform Shape : Less Mortar in Plaster.
8. Natural Concrete : Gains strength over time.
9. Natural Concrete : Walls can be left exposedun plastered.
10. Light weight : Faster and easier transportation
11. Light weight : Faster and easier brickwork
12. Light weight : saves structural concrete by 35%
13. Better heat & sound insulation compared to red Bricks
14. Far Lesser breakage during handling & transportation.
15. Better Vibration resistance compared to red Bricks.
More Details Call Our Toll Free No :- 1800 200 11 71