Write a Review
Our Product / Services
We offer the best product range of Dust Extraction, Rotary Screen Separator Machine, Plaster Of Paris Plant, Ceramic Ball Mill and AAC Bricks Manufacturing Line.
Buyers can contact us for high-performance AAC Bricks Manufacturing Line! We are the noteworthy Manufacturer, Exporter & Supplier of AAC Bricks Manufacturing Line. It is used for the manufacturing of AAC (Autoclaved Aerated Concrete) Blocks, which is an ideal replacement of traditional red clay brick. Owing to its outstanding performance and low maintenance, our AAC Bricks Manufacturing Line is widely acknowledged by the clients.
Our AAC Block Plant Is Ideal For Making AAC Block:
Features Of AAC Block :
Additional Information:
Payment Terms : L/C, T/T
Delivery Time : Depend on Order
We hold expertise in manufacturing, exporting & supplying Autoclave Stirred Tanks from Gujarat, India. We are equipped with our in-house production unit for fabricating superior quality Autoclave Stirred Tanks. Customers can rely on us for handling small or bulk orders of Autoclave Stirred Tanks and ensuring their delivery within postulated time.
Details:
Additional Information:
Payment Terms : L/C, T/T
Delivery Time : Depend on Order
| Length 8. 6 X 2.6 and four mash output RPM- 18. With Reduction Gear Machine [ Gear Center 20: 1 Reito. With Electric Motor (Electric Motor Required 1 H.P.1440 RPM ) |
| 1st Mash Hole Size 1.5 MM for Dust2nd Mash Hole Size 4 MM for chilly seed3rd Mash Hole Size 8 MM for small chilly |
| Other Model |
| MS Rotary Screen Chilly cleaning Machine Model 8, 10, 12, & 14 Length and four mash output RPM- 18. With Reduction Gear Machine [Gear Center 20: 1 Reito. With Electric Motor (Electric Motor Required 2 H.P. to 7.5 H.P. in various models 1440 rpm) |
| Model No. | Reduction Gear | Size | Capacity | HP |
| LCC-14 | 5” Center | 14 feet length 6’ Die | 10 tons in 8 Hours | 5 HP & 2 HP |
| LCC-12 | 5” Center | 12 feet length 6’ Die | 7 tons in 8 Hours | 3 HP & 2 HP |
| LCC-10 | 4” Center | 10 feet length 6’ Die | 5 tons in 8 Hours | 3 HP & 2 HP |
| LCC-8 | 3” Center | 8 feet length 6’ Die | 2.5 tons in 8 Hours | 2 HP & 1 HP |
| LCC-6 | 3” Center | 6 feet length 6’ Die | 1 tons in 8 Hours | 1 HP & 1 HP |
| The Gyratory screen incorporates the advance technology in screening machine.This machine is useful to screen the dry powder or wet medium. It is useful in solid-solid separtaion, solid classificationor solid -liquid separation. Three components of mechanical vibration like horizontal, vertical and circular give an edge over conventional screen. Gyratory motion is produced by rigid screening device that vibrates with screen above its center of mass. Machine consists of a circular table, which is an assembly of the number of decks with screens, and a spacing frames equipped with discharge spout. Screen held in uniform tension in all direction by a center support. This whole mass suspended on coil springs allow unit to vibrate freely and also give thrust to screening unit by its own compression and decompression. At the same time it also prevents transmission of vibration to the floor.Vibration is motivated by specially designed vertical vibrating motor, beneath the whole assembly and inside the rigid housing. Motor has extended shaft on both side on which eccentric weights are mounted. As shaft rotates it also rotate eccentric weights and this eccentricity gives vibration to whole unit. |
| Principle: |
| Material required to be classified is charged as thin bed into the upper deck over the screen.Coarser particles remain over screen, while fines pass through the screen and enter into lower deck. Particles over each screen in each deck are discharged automatically from individual discharge spout of each deck. Rotation of top eccentric mass causes vibration in horizontal plane and if it is increased, it will increase horizontal throw on screen will cause the over size material to discharge at faster rate. The lower weight causes vibration in vertical plane and tangential plane. It is desirable to promote maximum vertical vibration in order to dislodge material and to clean the screen. The tangential component of vibration and hence circular motion of particles in the screen are controlled by the angular position of the top and bottom eccentric weights to give better screening efficiency |
Mr. Hitesh Patel (Laxmi En-fab Pvt. Ltd)
25, Nilisin Plot, Phase 1, GIDC Vatva, Ahmedabad-382 445
(Gujarat). - 382445
Share us via
