Hydraulic Press

Listing ID #13799

The Press :The LNC Injectors are available in a variety of models in 4 - Pillar and C-Frame press designs. The total clamping force of the precision engineered press is calculated to accurately off-set the forces created during injection at maximum pressures.The press is provided with several standard features. These features are built-in to enhance productivity of the machine. Optional features that take efficiency to new highs are also available. Standard Press Features :The die clamping press has several features that are aimed at higher productivity, consistency and minimising operator fatigue. These are standard features for all models of LNC wax Injectors.M8 holes in a 50mm X 50mm grid are provided on the bottom & moving platens of the press for die mounting.Provision for platen cooling is provided as standard. The moving and Bottom platens of the press are provided with paths for coolant circulation. A die aligning jig is provided. This jig enables the operator to align the die correctly with the nozzle quickly. The jig is normally used when the dies are manually handled during short runs.Optional Features available :-LNC Injectors are offered with several optional features that further enhance productivity to new high. These options are normally available for the automatic models only. Three ‘T’ slots perpendicular to the nozzle may be chosen as the preferred die mounting facility in place of the M8- hole grid. Or a “quick-change die mounting” feature with hydraulic die-clamp facility may be chosen. This facility will bring the tool or die change time down to a few minutes further increasing productivity.Temperature is one of the most important control parameter of the injection machine. Platen temperature display is provided. Platen temperature display & control along with apparatus for cooling only or heating + cooling.Accelerated Press approach & return with soft clamping feature is provided to minimise cycle time & increase productivity.