Lemison Laundry Equipment Private Limited

hydraulic operated buck with moisture suction.  auto time release.  rocker arms , air cylinder: rocker arms moves on ball bearings. front head weight is counter balanced by springs. an hydraulic cylinder is activated by foot push paddle  affect raising & lowering of head. smooth operation of rocker arms & head.   centrifugal suction blower: centrifugal suction blower is connected with bed. 2 foot push paddle is used for easy process. one for auto recycle and other for  air suction. auto start at the time of pressing & stop at the time of the release. keeps padding dry at all times. efficient moisture suction. quick drying time.  digital time & temperature: at preset time automatic release of head. auto reset for next operation. digital temperature controller for electric heated model. safe drying & fine pressing of flat linen , garments or bed-sheets. 

» heated flatwork ironer» bed sheet press machine » hotel bed sheet press machine» flat work ironer» hospital bed sheet ironer» laundry flat bed press» automatic press machines

stainless steel cylinder & outer drum:
inner cylinder can be dismantled without dismantling outer drum. Electrically interlocked top lid stops the machine when opened. Three position drain connection with outer drum. Outer casing mounted on galvanized & hot painted heavy base frame. long rust free & strength.

 automation power injection brake:
ac  drive  (direct current low voltage) brake applies automatically after timed run of the machine. Running & braking time are digitally controlled. no foot pedals. No levers. No brake liners. No maintenance. Convenience & safety for the operator.

 direct drive. Self balancing.

cylinder is directly mounted on to a specially designed high torque heavy duty motor resting on spigot of the base frame with built-in rubber buffer cushion for self balancing. no v belts. No speed loss. Quick self balancing. Noiseless & vibration less performance.

» direct drive hydro extractor

» centrifugal hydro extractor

» hydro extractor machine manufacturer

» suspension hydro extractor

» hydro extractor direct drive

» industrial hydro extractor

» laundry hydro extractor

» fully automatic hydro extractor

» commercial hydro extractor

» heavy duty hydro extractor

» hydro extractor for laundry use

» automatic hydro extractor

» industrial hydro extractor

» hydro extractor

» landry hydro extractor

» hydro extractor machine

working roll made of 304 stainless steel, drive shaft made of galvanized steel pipe,  and can last for a long time.

both side panels of ironer have been made by 6mm steel sheet maintain efficient and stable operation during heavy duty process.

application of vf controlling technique makes it possible to adjust processing speed during operation in consonance with the requirements of different kind clothes.

transporting belt has been connected to self-tensioning force construction can maintain belt level disregarding status of power supply and fabric thickness.

beside the feed bed, there are emergency stop panel, will immediately stop the rolls rotation,  retract the beds to protect operator.

combined roll cabinet design, numbers roll combination selection.

lubricating oil injector installed on major roll cabinet for easy maintaining of shaft bearing.

equipped emergency stop button.

both sides of roller use heat preservation treatment.

with a reversing device.

heating type:  electric

hydraulic operated buck with moisture suction.  auto time release.  rocker arms , air cylinder: rocker arms moves on ball bearings. Front head weight is counter balanced by springs. An hydraulic cylinder is activated by foot push paddle  affect raising & lowering of head. Smooth operation of rocker arms & head.   centrifugal suction blower: centrifugal suction blower is connected with bed. 2 foot push paddle is used for easy process. One for auto recycle and other for  air suction. Auto start at the time of pressing & stop at the time of the release. Keeps padding dry at all times. Efficient moisture suction. Quick drying time.  digital time & temperature: at preset time automatic release of head. Auto reset for next operation. Digital temperature controller for electric heated model. Safe drying & fine pressing of flat linen , garments or bed-sheets. 

» heated flatwork ironer» bed sheet press machine » hotel bed sheet press machine» flat work ironer» hospital bed sheet ironer» laundry flat bed press» automatic press machines

Working roll made of 304 stainless steel, drive shaft made of galvanized steel pipe,  and can last for a long time.

Both side panels of Ironer have been made by 6mm steel sheet maintain efficient and stable operation during heavy duty process.

Application of VF controlling technique makes it possible to adjust processing speed during operation in consonance with the requirements of different kind clothes.

Transporting belt has been connected to self-tensioning force construction can maintain belt level disregarding status of power supply and fabric thickness.

Beside the feed bed, there are emergency stop panel, will immediately stop the rolls rotation,  retract the beds to protect operator.

Combined roll cabinet design, numbers roll combination selection.

Lubricating oil injector installed on major roll cabinet for easy maintaining of shaft bearing.

Equipped emergency stop button.

Both sides of roller use heat preservation treatment.

with a reversing device.

Heating type:  Electric

Working roll made of 304 stainless steel, drive shaft made of galvanized steel pipe,  and can last for a long time.

Both side panels of Ironer have been made by 6mm steel sheet maintain efficient and stable operation during heavy duty process.

Application of VF controlling technique makes it possible to adjust processing speed during operation in consonance with the requirements of different kind clothes.

Transporting belt has been connected to self-tensioning force construction can maintain belt level disregarding status of power supply and fabric thickness.

Beside the feed bed, there are emergency stop panel, will immediately stop the rolls rotation,  retract the beds to protect operator.

Combined roll cabinet design, numbers roll combination selection.

Lubricating oil injector installed on major roll cabinet for easy maintaining of shaft bearing.

Equipped emergency stop button.

Both sides of roller use heat preservation treatment.

with a reversing device.

Heating type:  Electric

Working roll made of 304 stainless steel, drive shaft made of galvanized steel pipe,  and can last for a long time.

Both side panels of Ironer have been made by 6mm steel sheet maintain efficient and stable operation during heavy duty process.

Application of VF controlling technique makes it possible to adjust processing speed during operation in consonance with the requirements of different kind clothes.

Transporting belt has been connected to self-tensioning force construction can maintain belt level disregarding status of power supply and fabric thickness.

Beside the feed bed, there are emergency stop panel, will immediately stop the rolls rotation,  retract the beds to protect operator.

Combined roll cabinet design, numbers roll combination selection.

Lubricating oil injector installed on major roll cabinet for easy maintaining of shaft bearing.

Equipped emergency stop button.

Both sides of roller use heat preservation treatment.

with a reversing device.

Heating type:  Electric

Flatwork Ironing machine for ironing bed sheets, quilt cover, tablecloth.

Stainless Steel Roller, Large diameter Φ800mm, Roller thickness 4mm, International safety standard.

High-quality steel carbon structures, strong and durable.

Finger protection and emergency stop for more safety.

Sealed rotary joints prevent leakage, safety and reliability, save energy.

Pressure roll with guiding ribbons, superior ironing quality, antistatic ironing belts.

Variable frequency, variable speed, according to fabric, moisture, steam supply etc.

Three-phase electrical system, overload protection, voltage and short circuit protection, emergency stop switch.

Ironing direction: front in back out / front in front out

Roller quantity, one, two, three, four, you can choose.

Heating:Steamer 

Working roll made of 304 stainless steel, drive shaft made of galvanized steel pipe,  and can last for a long time.

Both side panels of Ironer have been made by 6mm steel sheet maintain efficient and stable operation during heavy duty process.

Application of VF controlling technique makes it possible to adjust processing speed during operation in consonance with the requirements of different kind clothes.

Transporting belt has been connected to self-tensioning force construction can maintain belt level disregarding status of power supply and fabric thickness.

Beside the feed bed, there are emergency stop panel, will immediately stop the rolls rotation,  retract the beds to protect operator.

Combined roll cabinet design, numbers roll combination selection.

Lubricating oil injector installed on major roll cabinet for easy maintaining of shaft bearing.

Equipped emergency stop button.

Both sides of roller use heat preservation treatment.

with a reversing device.

Heating type:  Electric

Easy to operate High quality and It is suitable for hotel, hospital

It Use for flatwork, bed sheet, bath towel, towel, table cloth and so on. Steam or electrical heat, advanced frequency transmission.

Large roller made in high quality SS304 stainless steel.

Large roller with 800mm in diameter, with well-guided feeding design, the fabrics to be ironed are in good contact with more than 75% of the roller surface, thus giving good ironing result.

Roller are rotated through gear movement, thus the drive is smooth, low noise level and steady.

Adjusting heating temperature and fabric thickness freely guarantee any fabric ironing out.

Advanced speed reducer linkage device keep the machine work stable and reliable.

This machine is suitable for hotel, hospital, school, guest-hotel and garment manufacturer.

Heating type:  Natural gas or LPG.

Easy to operate High quality and It is suitable for hotel, hospital

It Use for flatwork, bed sheet, bath towel, towel, table cloth and so on. Steam or electrical heat, advanced frequency transmission.

Large roller made in high quality SS304 stainless steel.

Large roller with 800mm in diameter, with well-guided feeding design, the fabrics to be ironed are in good contact with more than 75% of the roller surface, thus giving good ironing result.

Roller are rotated through gear movement, thus the drive is smooth, low noise level and steady.

Adjusting heating temperature and fabric thickness freely guarantee any fabric ironing out.

Advanced speed reducer linkage device keep the machine work stable and reliable.

This machine is suitable for hotel, hospital, school, guest-hotel and garment manufacturer.

Heating type:  Natural gas or LPG.

Easy to operate High quality and It is suitable for hotel, hospital

It Use for flatwork, bed sheet, bath towel, towel, table cloth and so on. Steam or electrical heat, advanced frequency transmission.

Large roller made in high quality SS304 stainless steel.

Large roller with 800mm in diameter, with well-guided feeding design, the fabrics to be ironed are in good contact with more than 75% of the roller surface, thus giving good ironing result.

Roller are rotated through gear movement, thus the drive is smooth, low noise level and steady.

Adjusting heating temperature and fabric thickness freely guarantee any fabric ironing out.

Advanced speed reducer linkage device keep the machine work stable and reliable.

This machine is suitable for hotel, hospital, school, guest-hotel and garment manufacturer.

Heating type:  Natural gas or LPG.

Stainless Steel Spotting Table
1. The dirty spot on the garment can be treated on the spot table with the help of special cleanser. The dirt such as lipstick, paint smudge, blood, ink, coffee and milk should be removed easily.
2. A jet gun and tow dirt removing guns are provided. The jet gun can be applied to the garment either in cold or hot according to the dirt type.
3. Equipped with spot-removing gun and hot wind gun, and the gun is suitable to your hands. The fluid is concentrate. Touch style button is very sensitive and convenient.
4. Equipped with a set of air filter, which prevent the second pollution to garments. Hot wind and steam are controlled by magnetic valve, which can fully utilize the eradicator and strengthen spot-removing effect.
5. Equipped with stainless steel table.

Stainless Steel Spotting Table
1. The dirty spot on the garment can be treated on the spot table with the help of special cleanser. The dirt such as lipstick, paint smudge, blood, ink, coffee and milk should be removed easily.
2. A jet gun and tow dirt removing guns are provided. The jet gun can be applied to the garment either in cold or hot according to the dirt type.
3. Equipped with spot-removing gun and hot wind gun, and the gun is suitable to your hands. The fluid is concentrate. Touch style button is very sensitive and convenient.
4. Equipped with a set of air filter, which prevent the second pollution to garments. Hot wind and steam are controlled by magnetic valve, which can fully utilize the eradicator and strengthen spot-removing effect.
5. Equipped with stainless steel table.

Efficient Airflow. Padding Remains Dry At All Times. Form High Porosity Padding. Connected To Table Top. Mounted On A High Torque Electric Motor For Quick Start. Activated By Spring Loaded, Full Length Foot Pedal. Low Noise & Vibration Less Performance. Efficient Moisture Suction. Quick Drying Of Table Top & Padding.

All Stainless Steel:
Front inner cylinder, loading door, outer drum & chemical dispenser all in S.S. Electrically interlocked door stops the machine when opened. Hot painted structure frame. Front & back service. Requires little space on sides. Long rust free life.

Electrical Control Panel:
Mounted on top front. Individual controls for automatic time of wash. Auto reverse. Automatic digital temperature control. Solenoid operated  steam valves. Reduced number of rinses. Saves water, time & labor.

 Motorize  Drain Drain Valve:
Non Clog Full Clear Port manual drain valve flushes all the lint during drain. Easily accessible electric motor is splash proof. Feel safe, rust free operation throughout its life.

•  Laundry Plant


•  Laundry Machine


•  Industrial Washer


•  Commercial Washer


•  Dry Cleaning machine


•  Hotel Laundry Machines


•  Vertical Washing Machine


•  Hospital Laundry Machine


•  Laundry Washing Machine


•  Industrial Washing Machine


•  Industrial Laundry Machine


•  Commercial Laundry Machine


•  Heavy Duty Laundry Machine


•  Heavy Duty Washing Machine


•  Commercial Washing Machine


•  Front Load Washing Machine


•  laundry Machine Manufactures


•  Front Loading Washing Machine


•  Commercial laundry Equipments


•  Commercial Washing Equipment


•  Vertical Laundry Washing Machine


•  Laundry Equipment Manufacturers


•  Laundry Front Loading Washing Machine

Stainless Steel pressure vessel.

- Automatic and electric steam generator.

- Automatic water feeding by means of a water pump.

- Automatic water level control.

- Two safety devices fitted onto the boiler.

- Pressure switch and safety Swinging arm with suction and heated sleeve shape.

-Built in auto storage tank.

-Steam solenoid valves with flow control knobs.

Stainless Steel pressure vessel.

- Automatic and electric steam generator.

- Automatic water feeding by means of a water pump.

- Automatic water level control.

- Two safety devices fitted onto the boiler.

- Pressure switch and safety Swinging arm with suction and heated sleeve shape.

-Built in auto storage tank.

-Steam solenoid valves with flow control knobs.