LIHAO MACHINE

Bhattarahalli, Bangalore, Karnataka

Payment Terms : L/C, D/A, D/P, T/T, Western Union, ,

Packaging Details : Steel recoiler uncoiling machine uncoiler equipment suitable for continuous metal punching

Product Description


1. With metal rod conduction and electronic jiggle induction

2. Metal rood conduction induction: suitable for continuous punching for all kinds of metal and electronic components

3. Electron fine motion induction: suitable for continuous punching of all kinds of metal and nonmetal

4. With simple structure and low malfunction

Delivery Time : 30

Payment Terms : L/C, D/A, D/P, T/T, Western Union,

Packaging Details : High Speed Roller Feeder

Structures of the machine

1. unilateral bearing(Made in Germany)

Embedded in the ultra-carbide, and with roller bearings and wear resistance, It is safety, high precision and long life. The gears are re-grinding by heat-treated HRC600 with high transmission accuracy.

2. Roller wheel

Applies hollow, light weight, small swing inertia, can be stopped immediately, to ensure the accuracy of feed. Heat-treated HRC60. Hard chrome re-grinding, high hardness, excellent wear resistance, long life.

3. Disc brakes(General brake)

Applies advanced clutch to make the two sides fullcontact, long life, good stability, high precision.

4. Reverse facing device

(1)The structure is like the one-way device, can control the wheel with considerable precision, and will not cause the next wheel to have the slightest retrogression phenomenon after the long-term use, the stability and precision is quite high.

(2).Will not lead to condition that down roller reverse when the brake failure and the distance is not correct caused by the residual oil spilled during the stamping,

(3)It is not easy to exist high temperature.

(4)Comes with super-carbide and rollers, which are not easy to wear.

(5)The action way is the circular motion of the roller, rather than the straight motion of the four guide posts, so there will be no bite-killing.

(6)The twisting power required for small friction is reduced, and the rotating mechanism is less likely to be damaged.

(7)The reverse device can be configured at a speed of up to 30 m/min, generally 20 m/min, and increases 50% efficiency .

(8)Special structure, increased service life.



Advantages

1. Continuity: continuous processing for multiple engineering

2. High speed: up to 600 times per minute

3. Universality: regardless of the width and thickness of the material, just adjust the feeder to fit the mold can be used.

4. Simple and practical construction.

5. Low failure rate and easy maintenance.

Form:

Single type: suitable for coil (thickness of 0.15mm or more) single product or continuous punching products.

Double: suitable for coil(thickness 0.15mm or less) short-foot material, single-product continuous punching products.



Feeding accuracy:

Depending on the number of swings and the length of the feed varies (generally its accuracy is 0.03m), if the end of the road positioning, but also can get 0.01mm accuracy.

Delivery Time : 30

Payment Terms : L/C, D/A, D/P, T/T, Western Union,

Packaging Details : Uncoiler & Leveler 2 in 1
Features :

1. Material decoiler and straightener function together in one structure , does not take up too much space.

2. Suitable for various of metal coils uncoiling and straightening .

3. It can adopt variable speed device , to control the discharge speed.

4. The material rack and straightener are integrated, chain drive, chrome plated roller, special endless speed change device controls the discharging speed, with strong durability.

5. The uncoiling adopts splint on both sides, driven by the feeding roller, which is pulled by leveling part to control the speed.

6. Leveling roller adopts chromium steel 40CR, after conditioning , high frequency quenching , hard chromium plating. Surface hardness HRC60 degree, chrome plating thickness unilateral 0.05mm, high hardness, strong durability.

7. Leveling adjustment adopts four independent fine-tuning, which is controlled by scale, simple and practical.

8. Use L type iron frame induction frame induction, Mainly suitable for the material is lighter and smaller, the surface requirements are not high stamping production, It is often used with air feeder, with an economical punching automatic production line.

Delivery Time : 30