We are the ace Manufacturer and Supplier of Tile Grout Silica Based Mortar from Vijapur in Gujarat. The tile grout silica based mortar that we offer is a blend of Portland cement, graded aggregates, fortifiers and colorfast pigments. This is extensively used for porous & absorbent type tiles, non- vitreous clay tiles, and marble and glazed wall tiles. The advantage of using Tile Grout Silica Based Mortar are:

Area of Applications : Tile Grout are used for porous & absorbent types tiles, non vitreous clay tiles, marble and glazed wall tiles.

Features & Benefits :

• Color fast

• Weather resistant and easy maintenance

• Non- shrinking and non- cracking.

• Easy to apply and clean.

• No wet curing required when used with latex.

Method Applications :

Step 1

• Allow adhesive bed to set 24 hr. before grouting commences.

• Ensure that joints are dry, Clean or free of contaminants

Step 2

• Colour Grout with clean water as per the recommended mix ratio

• Mechanical mixing is recommended to obtain a uniform coloured mortar.

• Ensure pigments are throughly dispersed during mixing.

Step 3

• Apply grout into joints using a grout float /rubber squeegee

• Apply to a small areas at time

Step 4

• Clean excess or residue grout promptly using a damp cloth or sponge; before it dries out

Step 5

• When grout is sufficient firm, Polish tile surface with a clean dry cloth toremove grout film / haze

• Allow grout to set for 24-48 hours.

• The Paste should be kept away form direct sunlight, heat and used

Technical Data

• Application Temp. : Above 5 ^ºC -50 ^ºC

• Working time (Pot Life) : 45 min

• Setting Time : 24 hours

• Density : 1.68 g/cm3

• Joint Width : up to 3 mm wide.

Application Mixing : Just add 27% -30% water.

Packing : 500gm, 1Kg Available in more than 20 colours.

Coverage : 20-30 Running ft. per 1kg

Precaution & Limitation :

• Contains Portland Cement and silica sand. May irritate eyes and skin. Avoid contact with eyes or prolonged contact with skin. In case of contact, flush thoroughly with water.

• Do not take internally. Silica sand may cause cancer or serious lung problems. Avoid Breathing dust. Wear a respirator in dusty areas.

• Protect finished work form traffic or damage by other trades for an extended period of time during cold weather conditions. At room temperature conditions 70 ºF (20 ºC), protect overnight.

• Keep out of reach of children.

Shelf life

• Factory sealed bag of this product are guaranteed to be of first quality for one (1) year* if stored off the ground in a dry area.
• *High humidity will reduce the shelf life of bagged product.

Other Products Categories Available : Brings the Widest range of Construction Material & Chemical.

We are a well-known Manufacturer and Supplier of Jointer Silica Based Mortars from Vijapur in Gujarat. The Jointer Silica Based Mortar is manufactured using German technology. This mortar comprises of Portland cement, special silica sand and polymers. It is a masonry mortar, which can be used in laying various types of fly ash / concrete bricks, AAC blocks, concrete blocks and stone.  It is an ideal substitute to the conventional jointing mortar which is 12-18 mm thick and Jointer Silica based Mortar is only 3-5mm thick.  This superior quality Silica based mortar is manufactured under stringent quality control, it is easy to handle and transport (40 kg BOPP bags), minimal wastage and doesnt require any special expertise to use.

Areas of Application : Jointing mortar is a masonry mortar for use in laying various types of fly ash/concrete bricks, AAC block, Concrete block and stones.

Features & Benefits :

• Uniform quality and strength due to quality control and produce under strict supervision in factory.

• Easy to handle, mix, transportation save lot of energy which is required in conventional method/ system.

• Available in convenient packing of 40Kg which are easy for company self transportation, handling & use.

• No special / Skill person required for joining of AAC blocks, Concrete block masonry.

• Wall join with Jointer can be plaster or paint earlier compare to wall join with conventional mortar

• Wall in which Jointer  has been used gets more strength in lesser times as compare to other materials

• Skip the activities of supervision & monitoring the quality of mortar at site.

Method of Application :

• Easy to mix and use dry mortar savers Water, Sand, Cement & Time.

• Join thickness minimum 3/5 mm against 12 mm to 18 mm in other material.

• No curing required to the joints after installation in ACC Block Masonry against other conventional Cement.

• No wastage during use against conventional cement mortar.

Application Mixing : Just add 27% -30% water in 40kg Block Jointing bag.

Packing : 40 Kg BOPP Export Quality Bag. Company also provide trowel in very bag.

Precaution & Limitation :

• During cold weather, protect finished work from use until fully cured.

• Contains Portland cement and silica sand. May irritate eyes and skin. Avoid contact with eyes or prolonged contact with skin. In Case of contact, flush thoroughly with water.

• Do not take internally. Silica sand may cause cancer or serious lung problems. Avoid Breathing dust. Wear a respirator in dusty areas.

• Keep out of reach of children.

Shelf Life : Factory sealed bags of this product are guaranteed to be of first quality for one (1) year* if stored off the ground in a dry area, at 21^oC and 50% RH

Other Products Categories Available : Brings the widest range of Construction Material & Chemical

 We are a celebrated Manufacturer and Supplier of Plastering Silica Based Mortar from Vijapur in Gujarat. This is a premixed ready to use cement-based mortar for external as well as internal plaster. Plastering Silica Based Mortar is a mixture of graded inert fillers, additives and binders and has excellent impermeability, thus increasing the plastic life of mortar & reducing dry shrinkage cracks. As it is anti corrosive can be safely used in plastering machines.   The superior manufacturing values ensure consistency in the mortar, the convenient packaging makes transporting and handling easy, it is easy to use and apply and also cures faster than the regular wall plasters.

Areas of Applications : It is a premixed ready to use cement based mortar for external as well as internal plaster which ensures quality consistency. It is a mixture of graded inert fillers, additives and binder, has excellent impermeability characteristic, increases plastic life of mortar and reduces drying shrinkage cracks. It is free from corrosion inducing substances and can be used with plastering machines

Features & Benefits :

• Uniform quality and strength due to quality control and produce under strict supervision in factory.

• Easy to handle, mix transportation save lot of energy which is required in conventional method / system.

• Available in convenient packing of 40 kg which are easy for company self transportation, handling & use.

• Wall Plaster with Plastring can be paint earlier compare to wall plaster with conventional mortar.

• Wall in which Plastring has been gets more strength in lesser time & lesser curing as compare to other materials

• Skip the activities of supervision & monitoring the quality of mortar at site.

• Labour cost can be reduce.

• Preparation is simple, just add water.

• Mix the product with water in the ratio of approx. 1:4

• Mixing can be done manually or by stirrer

Method of Application :

• Easy to mix and dry mortar saves Water, Sand, Cement & Time.

• Joint thickness minimum 8/12 mm against 15 mm to 25 mm in other material.

• No wastage during use against conventional cement mortar

Packing : 40kg BOPP Export quality bag.

Application Mixing : Just add 22% -25% water in 40 kg Lion Plastring bag.

Coverage : Coverage of Lion Plastring is 18-20sq ft./40kg bag.

Precaution & Limitation :

• During hot weather, cure the surface with light spraying of water.

• Contains Portland cement. May irritate eyes and skin. Avoid contact with eyes or prolonged contact with skin. In Case of contact, flush thoroughly with water.

• Do not take internally. Avoid Breathing dust. Wear a respirator in dusty areas.

• Keep out of Reach of Children

Shelf Life : Factory sealed bags of this product are guaranteed to be of first quality for one (1) year* if stored off the ground in a dry area, *High Humidity will reduce the shelf life of bagged product.

Other Products Categories Available : Brings the widest range of Construction Material & Chemical.

We are a recognised Manufacturer and Supplier of High Bond Adhesive Silica Based Mortar from Vijapur in Gujarat. This High Bond Adhesive Silica Based Mortar is a high tensile polymer modified product and is ideal for fixing marble or any other natural and heavy stones on floors, walls and ceilings. It is easy to mix and use, doesnt need too much preparation time, it is self-curing and non-hazardous. High Bond Adhesive Silica Based Mortar comes in easy to handle packaging and this also enhances its shelf life.

Area of Applications : Bond Adhesive mortar is a masonry mortar for use to file heavy stone, heavy marble on Floor, wall, ceiling.

Features & Benefits :

• Preparation is simple, just add water

• Although cement based, requires no Curing. This product is self curing

• It can be used in frame / wall- celling border areas.

• Excellent Tensile adhesion strength.

• Polymer modified formulation enhance its durability.

• Being ready to use, the product saves considerable time and labour.

• Non- Hazardours.

Method Applications :

• Easy to Mix and use dry mortar saves water, Sand, Cement & Time.

• Mix the product with water in the ratio of approx. 1:4

• Mixing can be done manually or by stirrer.

• Mixing to be done till homogeneous mix is obtained.

• The Paste should be kept away form direct sunlight, heat and used with in 2 hr. of preparation (after mixing with water)

Application Mixing and Placing : Just add 25% - 27% water in 20kg bag.

Packing : 20 Kg in BOPP Export Quality Bag.

Coverage : 30-35 sq. ft per 20Kg with notch trowel for a bed of 3-4 mm.

Precaution & Limitation :

• Contains Portland Cement and silica sand. May irritate eyes and skin. Avoid contact with eyes or prolonged contact with skin. In case of contact, flush thoroughly with water.

• Do not take internally. Silica sand may cause cancer or serious lung problems. Avoid Breathing dust. Wear a respirator in dusty areas.

• Protect finished work form traffic or damage by other trades for any extended period of time during cold weather conditions. At room temp. conditions 70 ºF (20 ºC ), protect overnight

• Keep out of reach of children

Shelf life :

• Factory sealed bag of this product are guaranteed to be of first quality for one (1) year* if stored off the ground in a dry area.
• *High humidity will reduce the shelf life of bagged product.

We are a renowned Manufacturer and Supplier of Glass Mosaic Adhesive Silica Based Mortar from Vijapur in Gujarat. This is a multipurpose polymer-modified thin set powder, which has multiple uses that include applications on interior floors & walls as well as exterior floors & wall installations. Glass Mosaic Adhesive Silica Based Mortar is a cementitious thin set powder, to be mixed only with water to install various types of tiles & stones on variety of substrates using method of installation.

Area of Application : Glass Mosaic Adhesive is a multipurpose, polymer modified thin set power offering vast utility including applications on interior floor & wall as well as exterior floor & wall installations, Swimming Pool.

Feature and Benefits :

• Single Component, just add water.

• High strength, polymer modified

• Economical & Easy to use.

• Water and shock resistant.

Suitable Substrates :

• Concrete

• Cement Plaster

• Cement Backer Board

• Concrete Masonry

• Tile and Stone

• Cement Terrazzo

• Cement Mortar Beds

• Brick Masonry

• Exterior Grade Plywood

Method of Application :

• The Glass Mosaic adhesive shall be applied to the surface to be tiled with a notched trowel using a scraping motion to work the adhesive into good contact with the surface to be covered.

• Notch trowel with notches approx. 4mm is recommended to get a bed thickness of 1.5-2mm. V-notch of 3mm also can be used to get bed thickness of 1.5mm.

• Apply only so much that can be covered with tile within 10-15 min or while the adhesive surface is still tacky.

• The Glass Mosaic tiles shall then be set in place and beaten gently with mallet or grounding float to insure 100% full bedding.

• Tiles shall be aligned to achieve uniform joints and then allowed to set until firm.

• The face of the sheets of front mounted glass mosaic titles shall then be dampened and the face mount paper can be removed.

• Excess adhesive must be cleaned form the surface of the tile with a wet cloth or sponge while the adhesive is fresh and has not hardened.

Grouting : Grout installation after a minimum of 24 hr. Curing time at 70 ºF (21 ºC).

Packing : 20 Kg in BOPP Export Quality Bag.

Application Mixing : Just add 27% -30% water.

Coverage : Approx. 55-60 sq. ft per 20 kg bag with 1 /4” x 1 /4” (6mm x 6mm) square notched trowel for a bed of 3mm.

Precaution & Limitation :

• During cold weather, protect finished work from traffic until fully cured.

• Contains Portland Cement and silica sand. May irritate eyes and skin. Avoid contact with eyes or prolonged contact with skin. In case of contact, flush thoroughly with water.

• Do not take internally. Silica sand may cause cancer or serious lung problems. Avoid Breathing dust. Wear a respirator in dusty areas.

• Keep out of reach of children.

• Not for use directly over particle board, luan, Masonite or hardwood floors.

Shelf life :

• Factory sealed bag of this product are guaranteed to be of first quality for one (1) year* if stored off the ground in a dry area.
• *High humidity will reduce the shelf life of bagged product.

Other Products Categories Available : Brings the Widest range of Construction Material & Chemical.

We are the famous Manufacturer and Supplier of Crack Seal Silica Based Mortar from Vijapur in Gujarat. This is a dry powder and is effective in repairing cracks in plasters, concrete and structural cracks as well. It is a cost effective substitute to expensive sealants, plasters and putties and can also be used for cracks in parapet wall junctions, roof slabs and ceilings because of its viscosity.

Areas of Applications : Crack Seal is ideally suited for repairing of superficial plaster cracks as well as structural cracks.

Feature and benefits:

• Crack Seal is ideally suited for repairing of superficial plaster cracks as well as structural cracks.

• Crack Seal can be used for repairing ceiling cracks and plasters with ease because of its viscosity.

• Cracks at parapet wall junction and roof slabs are also sealed with Crack Seal.

• The product suitable for rendering.

Method of Application :

• It is essential that the surface of the concrete to be repaired is sound, clean and uncontaminated.

• Chase the crack and form a neat “V” shaped groove at least 6 mm wide on surface

• Damaged plasters can be cut out in more or less square sides.

• Defective material must be removed carefully using reducing tools, needle guns or sharp tap is and chipping hammers Force must.

• Not be applied as it will damage the sound material beneath.

 Application Mixing : Just add 275 -30 % water in 1kg bag.

Packing : 1kg Bag (Gray and White)

Coverage : In crack Repair 1Kg of crack seal repairs 14 linear feet of crack chased to width of 6mm

Precaution & Limitation :

• Contains Portland Cement and silica sand. May irritate eyes and skin. Avoid contact with eyes or prolonged contact with skin. In case of contact, flush thoroughly with water.

• Do not take internally. Silica sand may cause cancer or serious lung problems. Avoid Breathing dust. Wear a respirator in dusty areas.

• Protect finished work from traffic or damage by other trades for an extended period of time during cold weather conditions. At room temp. conditions 70 ºf (20 ºC),

• Keep out of reach of children.

Shelf life :

• Factory sealed bag of this product are guaranteed to be of first quality for one (1) year* if stored off the ground in a dry area.
• *High humidity will reduce the shelf life of bagged product.

Other Products Categories Available : Brings the Widest range of Construction Material & Chemical.