Other Products / Services #2161808

We are offering bar straightener machine.Specifications:capacity5-12 mm 5-10 mmworking speed 15 mmin 18 mmingear ratio 30:1 30:1motor 4 hp 3 phase 4 hpweight 300 kg 90 kg

Specifications:Model No.TDCM 120Drum Dia 740 mmDrum Length 860 mmDrum Blade Size 4 mmDrum Opening Size 460 mmHandle Dia (Rotating Handle) 600 mmTyre Capacity (each) 230 kg Tyre CapacityWheel Shaft 41mm (Dia) Length 840mmWheel Size 400 mmDrum Gear 32 mmRequired Power 3 km (4 HP)Mixing Drum Speed 21-25 RPMCharging Capacity 300 Ltr.Drum Volume 350 Ltr.Discharge Capacity 120 Ltr.

Specifications:Model No.JZ 350B Mortar MixerType Pan Mixer Tilting DrumMax. Output 8M Hr 5MHrCharging Cap. 350 Ltr 250 LtrDischarging Cap. 250 Ltr 200 LtrPower Aggregate 3Kw 415V 3Kw 415VMax. Grain Size 20 mm 10 mmRotation Speed 30 rpm 30 rpmDimension (LxWxH) cm 112x112x40 100x75x160

Specifications:Model No.GQ-16 OY-22 RC-25GQ25Max. Steel Bar Dia 16 mm 22 mm 25 mmTMT Steel Bar Dia 12 mm 16 mm 20 mmMotor 1.5 Hp 1300 Watt 220 v 1300 Watt 220 vStrokes Min. 30 4 4Blade Thickness 12 mm 11 mm 15 mmWeight 80kg 15kg 25kgOverall size in mm 650x400 x540 500x200x300 565x230 x345

We are offering vibrating impact rammers.Features :special 4- stroke engine for the rammer.The guide handle built-in shock mount reduces hand- arm vibration.Handle kit for easy transportation.Special crank and rod system for increased durability.Double cleaner system.Heavy-duty shock rubber absorbs kickbacks.High-density polyethylene fuel tank eliminates corrosion.Rack and pinion throttle lever.

Specifications:Model No.HQL-18QX500D YT-400 HQR-400APower Source Electrical Diesel Engine (Handle Start) Petrol EnginePower 7.5 Kw. 15 Hp 13 HpBlade Size 400 mm 400 mm 400 mmMax. Cutting Depth 180 mm 170 mm 140 mmWater Tank Capacity 45 Litre. 55 Litre 18 LitreWeight 130 Kg 155 Kg. 125 Kg.

We are offering steel stub bar straightening machine.Specifications:modelsbs 4-12straightening dia 4-12 mmstraightening speed 28 mminstraightening length 500-3000mmpower 4 kwweight 320 kgoverall size 970x640x1130 mm

We arte offering coil straightening machine.Specifications:modelsc 4-12straightening dia 4-12 mmstraightening speed 25-35 mminrevolving speed of main shaft 680 rminpower 5.5 kwweight 240 kgoverall size 1650x500x930 mm

We are offering bar straight thread rolling machine.Features ; 1. Hgs-40 rib peeling and thread rolling machine is compact in structure, stablein operation, and has an automatic opening and closing mechanism for rib peeling. Cycle time is only 30 seconds to finish a threaded end. 2. Adopts cold thread rolling technology.Does not cut the rebar parent metal, the strength of rolled thread is much higherthan the parent metal. 3. Widely used, is able to process rebar of grades ii and iii with diameters 16mm-40mm. 4. Easy to operate, no skilled technicians required. 5. Economic, low investment for the equipment. 6. Threading saves at least 20% wastage of expensive rebars compared to theconventional splicing lap procedure.

We are offering mechanical bar splice.Features ;* couplers are designed and manufactured in compliance with aci318, jgj107, ubc1997, bs8110, nf35-20-1, din1045, isowd 15835 (draft).* under full-tension the bar breaks during tensile tests, but coupler the remainsunbroken.* easy to operate and maintain, high production efficiency and fast installation, noneed for skilled technicians.* the splices can be produced in advance saving valuable construction time.* inexpensive to purchase, maintain and repair.* couplers and threaded bars are protected by plastic cover.* full traceability of material origin and production batch. benefits ;* no staggering of spliced bars required.* practical alternative to lap splicing.* solves bar congestion problems.* shortens construction cycle time.* reduces steel wastage.

We are offering bar welder machine.Specifications:phase single phasecurrent 263 amp.Capacity 100 kvamax. Bar dia 6-26 mmcurrent type dc

Features :Compact design, strong and robust steel construction.Heavy-duty twin chains for better load stability Top quality hydraulic pump and cylinderHeavy duty 1 piece double lipped C Sections forks for greater strengthBuilt in top of stroke bypass valveNeutral valve allows the operator to manoeuver the equipment safely And effortlesslyHydraulic regulator for automatic lowering speed controlAll stackers are fitted with large Diameter 8" steering wheels