Bharat Industries

Wagle Estate, Thane, Maharashtra

Bolt Cuttersare used in heavy industries as cutting tools for cutting thick materials. They can be used from general purpose to heavy duty cutting for cutting rods, heavy steel wires, metal bolts, nails, screws, case hardened chains.

Bolt cuttersusually are made of smaller jaws or cutting blades and have longer handles, connected with hinges. On compression of handles, these hinges maximize force applied on jaws by increasing leverage. This enables the user to cut through thick and rigid materials relatively easily. These cutters have adjustable screws for adjusting amount of closure of handles, for blades to make contact with each other.Bharat Industriescan make available to you both general purpose as well as high tensile Bolt cutters.

Cuttersare used in heavy industries for cutting thick materials including wires, cables, rods, case hardened chains.

• Wire Cutters

Wire Cuttersare used specifically for purpose of cutting wire. These also known assnips or diagonal Pliers, as are very similar to pliers.

The most noteworthy difference between wire cutters and Pliers is that instead of grips as in Pliers, these havesharpened edges, which assists in cutting through wire. More big and heavier the Cutter, more heavier would the wire gauge it can handle.Bharat Industriescan make available to you wire cutters as well as their jaws based on your requirement.

Cable Cutters

Cable Cuttersare used mainly in cuttinginsulated copper and aluminium cableof various diameters. Jaws of Cable cutters make it possible to cut through the cable without causing any major distortion to the internal wires. These cutters have strong tubular handles with P.V.C comfort grip, which enables its users to cut through the cable with ease.Bharat Industriesmakes available to you cable cutters based on your requirement.

SR NO.	Length (inches)	Avg. Cutting length (mm)
1	14*	9
2	18	20
3	27*	15
4	30	30
6	42	50

Parrot-type Cable Cutter

Replacement Jaws can be made available for Cable Cutters

Bharat Industries prepares Charcoal Powder of excellent quality as per the customers requirement using the finest selected charcoal woods acquired from reliable vendors. Owing to our enormous experience in the Charcoal-Domain, we have developed a prominent lead over other domestic vendors in India as well as emerged asleading exporter of charcoalin the international markets.

Usage

Diamond fileshave a broad-spectrum usage in industries related togauge, mouldanddieinstruments, where these are used for grinding harder materials.

Bharat Industrieshas been engaged in producingPolishing-pinsright from the very beginning, giving us an experience of over 40 years in Polishing-pin manufacturing. We manufacture various types of Polishing-pins includingWood & Steel Polishing-Pins and Steel Lapping-Pinsfor your usage inDie-Polishing. These Pins are recognized as being useful for providing fine polish without altering their shape during polishing procedures.

We are offering pulling-in-dogs are used to drag the inlet wire around drawing blocks of machine, until there is an adequate wraps of wire around blocks for the machine to continue feeding automatically. pulling-in-dogs of bharat industries have numerous attributes, making them the best ones in market: 1. The wire is pulled tangentially, preventing any bends in it. 2. Spring loaded jaws 3. Dog-curls around block 4. Single piece body made of steel 5. Jaws made of hardened steel having radius profile as per your requirement. 6. Universal shackle enabling usage with different types of chains and rope. incase required, bharat industries can make available the following spare parts: a. Jaws b. Hooks c. Links d. Compressive springs. pulling-in-dogs are an accessory to wire-drawing process, particularly, ferrous wire drawing. These pulling-in-dogs are suggested for usage especially for lighter drawing applications, predominantly steel and other softer non-ferrous applications.

We offer tube drawing dies, pipe drawing dies, rod drawing dies. drawing dies used in tube or pipe drawing can be of any custom shapes, including commonly used round, hexagonal and square. The drawing process is very similar to wire-drawing. The major difference is usage of a mandrel. This mandrel is placed at the gorge of die and its size determines the die inner diameter as well as wall-thickness. A well-finished mandrel achieves smooth surface on the inner side of the tube or pipe. bars and rods drawing is no different than wire, tube or pipe drawing. The significant difference is that rod & bar tends to be much thicker then wires or tubes.

Need for recutting & repolishing:the usable life-span of a die depends on the geometry as well as the frictional and thermal loads it goes through while drawing. The finest and most durable hard-metal drawing die and the most compact diamond drawing die is bound to lose its flawless surface and eventually its geometry, mostly forming indents in reduction core/bearing region. A decline in excellence of wire drawn is symptomatic of initiation of wear in die being used. This is a clear sign for substitution of the drawing dies being used on an urgent basis. restoring the precision of drawing dies accurately cannot always be carried out within your own die-shop. You need to hire specialists having best working equipment with right working materials and calibrating instruments for the enlargement of diameter to be carried. repolishing:wherever feasible and also defects are not severe, the dies are just repolished removing all defects and keeping the original diameter, assuring a longer life-span recutting:in certain cases, scratches and defects develop in the cylindrical as well as conical area of the die. Recutting eliminates any such defects and wear the die might have undergone and also recalliberate the die to new diameter suggested by the client. These services are carried out with the ultramodern technology, ensuring higher productivity and finest wire quality.

Bharat Industries provides you range of Wire Die Inspection Microscopes, assisting you to maintain stringent quality control standard. Specially DesignedBI-15 & BI-25 Microscopeshelp you to examine surface finish along with wear patterns of yourdies, thereby playing a vital role in your quality control system.

Compound dies are those dies wherein more than one operation takes place on a single station. These dies are mostly used for cutting operation and hence addressed as cutting tools. These dies allow simultaneous cutting of internal as well as external part features in a single stroke in some cases. Compound dies are always more accurate and economical as compared to single operation or simple dies.

We are offering wire drawing dies. tungsten carbide dies are the foremost choice in drawing equipment of wire-industry when an economical option is desired over better wear resistance and wire-surface finish. Tungsten carbide dies are little, ultra-hard precision tool with a small hole at its center. if you desire the ultimate-quality wire-drawing dies, at lowest price then bharat industries is your best option! we manufacture long-lasting high-quality carbide drawing dies for use in making wire, rods, pipe and bars in all standard shapes-round, hexagonal and rectangle. These dies can serve drawing of various materials including mild steel, high-carbon steel, stainless steel, as well as numerous other steel alloys. softer materials like aluminum and copper alloys can also be frequently drawn. in wire-drawing, a wire of comparatively larger diameter is drawn through a die with a smaller bore-size. This eventually, reduces the diameter of the wire to the preferred size and tolerance, keeping the volume intact. The desired wire-size is achieved by drawing the wires through a series of dies having descending bore-sizes. The final die in this series, sizes the wire to the preferred final-size. Bharat industries develops dies to achieve drawing of various steel alloys including high-carbon steel, stainless steel, mild steel and many more. bharat industries has special mastery in manufacturing fine size dies ranging in sizes from 0.15mm to 0.8mm used specially in co2 mig & stainless steel wire drawing.

We are offering polycrystalline diamond dies. polycrystalline diamond(pcd) dies are the backbone of wire industry, when longer life, predictable performance along with excellent surface finish are required. selection of any die-nib material depends on material being drawn as well as desired finish of wire-surface. However, in any case, withstanding the demanding wear of the die is a necessity. advantages of pcd: 1. Lesser downtime 2. High thermal conductivity & hardness 3. Excellent resistant to fracture & breakage 4. Uniform wear 5. Better priceperformance bharat industries, with its stringent quality provides you with polycrystalline diamond dies, with an unproblematic performance from manufacturing to refurbishing. polycrystalline diamond dies can be used in wire-drawing operations ranging from rod-size to intermediate to very fine wire sizes of various ferrous and non-ferrous metal wires including copper, aluminum, stainless steel and many other.

 

Polycrystalline Diamond(PCD) Dies are the backbone of Wire Industry, when longer life, predictable performance along with excellent surface finish are required.

We are offering cutters are used in heavy industries for cutting thick materials including wires, cables, rods, case hardened chains. there are three main types of cutters based on the work-fields:1. Bolt cutters:bolt cutters are used in heavy industries as cutting tools for cutting thick materials. They can be used from general purpose to heavy duty cutting for cutting rods, heavy steel wires, metal bolts, nails, screws, case hardened chains. bolt cutters usually are made of smaller jaws or cutting blades and have longer handles, connected with hinges. On compression of handles, these hinges maximize force applied on jaws by increasing leverage. This enables the user to cut through thick and rigid materials relatively easily. These cutters have adjustable screws for adjusting amount of closure of handles, for blades to make contact with each other. there are two type of bolt cutters for general purpose as well as high tensile. 2. Wire cutters:wire cutters are used specifically for purpose of cutting wire. These also known as snips or diagonal pliers, as are very similar to pliers. the most noteworthy difference between wire cutters and pliers is that instead of grips as in pliers, these have sharpened edges, which assists in cutting through wire. More big and heavier the cutter, more heavier would the wire gauge it can handle. these cutters are available in standard size of 300mm having cutting length if 2, 5mm. 3. Cable cutters:cable cutters are used mainly in cuttinginsulated copper and aluminium cable of various diameters. Jaws of cable cutters make it possible to cut through the cable without causing any major distortion to the internal wires. These cutters have strong tubular handles with p.v.c comfort grip, which enables its users to cut through the cable with ease. these cutters are available in sizes ranging from 14"- 42" having cutting length in range from 9-50mm.

We prepare charcoal powder of excellent quality as per the customers requirement using the finest selected charcoal woods acquired from reliable vendors. Owing to our enormous experience in the charcoal-domain, we have developed a prominent lead over other domestic vendors in india as well as emerged as leading exporter of charcoal in the international markets. usage: our charcoal powder & granules are mainly used in galvanisation of wire. We produce charcoal powder having appropriate carbon content, having best combustion competence to retain high temperature needed during galvanisation. When the wire exits the lead bath, charcoal is needed as a wiping agent to minimise the lead-amount carried by it. This also reduces wire surface oxidation and endows the galvanised wire, a glossy finish.