White Cement Based Wall Putty

Listing ID #4311263

Iris Paints White Cement Based Wall Putty encompasses a superior formulation, based on white cement. It is water based and specially designed for leveling and smoothening the undulations on interior walls and exterior walls. It provides a smooth surface for paint application.It is available in powder form.

• Area of Application : Interior Wall Masonry, Exterior Wall Masonry.
• Physical State : Powder
• Method Of Application : Apply with putty knife
• Drying Time : Touch Dry - 30 Minutes, Hard Dry - 4 to 5 Hours
• Shades Offered : White
• Packing : Woven Bags - 1Kg, 5Kg, 20Kg, 40Kg

• Take required quantity of Iris Wall Putty in a pan. 35-40% water by volume is required to prepare paste of 
  good consistency.
• Mix half of required water quantity into it. Knead/Mix the Putty & wait for few minutes.
• Mix remaining quantity of water to get desired consistency.
• Mix vigorously for 5-10 minutes for making a lump-free and uniform paste.
• Mix the product in such quantities that it should be used within 2 hours of preparation.
• Mixing may be done manually or by using a suitable electric mixer.
• Clean the surface thoroughly by sanding with suitable emery paper to free from dust, dirt etc.,
• Ensure that surface plastered or made with cementitious material
• The surface should be moderately rough and in just-wet condition.
• Apply first coat of Iris Wall Putty (1.5 mm thickness) using a blade / spatula on the wall.
• Apply second coat of Iris Wall Putty (1.0 mm thickness) preferably after 4 hours in summers and after 
  12 hours in winters.
• Second coat shall be applied in horizontal manner to even out application marks of first coat, if any.
• Allow complete drying overnight and then use a fine emery paper to remove application marks, if any.