Our Products
Water Proof Paper Best Indian brand CUMI - Carborundum
Silicon carbide water proof paper.[Made In India ]
Brand:- Carborundum / CUMI
Size of Sheet 9" X 11" [ 225 mm X 275 mm ]
Mitutoyohas an established reputation for reliable, high-quality products, andMitutoyo Micrometers
are no exception. A wide range of Mitutoyo Micrometers with versatile
features ensure that you always have the right tool for the job. Thread
Check features a full line of Mitutoyo Micrometers including digital
micrometers, outside micrometers, coolant proof micrometers, ratchet
thimble micrometers, Quickmike micrometers, V-Anvil micrometers,
Quantumike micrometers, blade micrometers, caliper type micrometers,
indicating micrometers disk micrometers, caliper type micrometers, screw
thread micrometers, and many more kinds of mitutoyo micrometers. Please
browse through our extensive inventory of Mitutoyo micrometers to find
the micrometer that best suits your needs. Contact our knowledgeable
sales engineering staff for any questions or assistance regarding our
selection ofMitutoyo micrometers.
Pikal Liquid for Metal Cleaning
Introduction:Pikal Liquid is a recognized name with those needing to polish delicatemetal surfaces for nearly 100 years. It is a unique product that is unlike anyother. It has been formulated with a smaller size aluminum oxide abrasiveparticle than its sister product, Pikal Paste. Hence, it will not be as effectiveof a remover of caked on dirt as Pikal Paste or Pikal Care but it willresult in a high liquid with minimal abrasive damage to the polishedsurface.Applications:The applications in high vacuum and UHV and electron microscopeapplications, we recommend Pikal Paste instead of Pikal liquid. If yourapplication is not so demanding, and you don't need this kind of highperformance in a metal polish, and there are some who do not, then wewould suggest you consider the lower cost Wenol or POL metalpolishes, also available from SPI Supplies.Non-technical applications:Pikal Liquid is known for giving high luster to home hardware like doorknobs and brass kitchen utensils or fireplace hardware. It also workswonders on metal tableware, musical instruments, irons and other productsmade of stainless steel, nickel, chrome, and aluminum.It is also effective in the polishing of precious metals, ivory and tortoise-shell objects, plastics. It is usedwidely by coin collectors for the polishing but without damaging precious coins. It is used widely for theNon-technical applications:Pikal Liquid is known for giving high luster to home hardware like doorknobs and brass kitchen utensils or fireplace hardware. It also workswonders on metal tableware, musical instruments, irons and other productsmade of stainless steel, nickel, chrome, and aluminum.It is also effective in the polishing of precious metals, ivory and tortoise-shell objects, plastics. It is usedwidely by coin collectors for the polishing but without damaging precious coins. It is used widely for thechrome plates parts of automobiles, especially antique automobiles.Pikal liquid is also used in hospitals and medical clinics for the polishing of stainless steel instruments, partsof medical equipment, hardware of ships, fire engines, and ambulances. In the home kitchen it is also widelyused for removing dirt from enameled surfaces such as on refrigerators and stoves.Always think of Pikal liquid as being the "gentle alternative" to Pikal Paste or Pikal Carechrome plates parts of automobiles, especially antique automobiles.
C I Foot Valve Ball Type NORMAX MAKE
Normex Ball Foot Valve (Flanged)
Product Specification
Size | 50 mm to 300 mm |
Model | B-05(N) |
Brand | Normex |
Pressure Rating | PN 1.6 |
Temperature | Up to 80 C |
Body Material | Cast Iron (CI) |
Installation | Vertical/Horizontal |
Product Description Normex Ball Foot Valves are regarded as the only reliable, 100% leakproof foot valves. These valves are the solution to priming problems.
In the application where foot valve is involved, the main concern of the user is draining of water by the foot valve. This calls for the priming of the the pump which is time consuming tedious job. If the on-off frequency is more, the trouble rises multifolds. A heavily leaking footvalve can also give rise to start up trouble to pump as suction line is empty. A leaking footvalve can cause not only time wastage but also delay in process industry where water is required at particular instant.
In typical case of Fire Fighting application, if the foot valve leaks, the pump is not started can cause damage to property as well as life. Even in application in irrigation / agriculture sector, where electricity is available for limited time, intermittent priming of the pump every time, day and night, is not possible.
With Ball Foot Valve (Threaded or Flanged) installed, priming is totally avoided. Normex Ball Foot Valves are recommended by many Plumbing, Fire, HVAC & Irrigation contractors and consultants for their life-long reliability.
Product Image
Brand | PikalCare |
Usage/Application | Metal |
Packaging Size | 150 Gram Tube |
Color | White |
State/Form | Paste |
Packaging Type | Tubes |
Grade Standard | Industrial Grade |
Product Description
Metal polishing : Pikal care / 1tube 150gThe Pikal
professional metal polishing and cleaning compounds are well known for
their excellent results in many applications with a positive track
record of nearly 100 years. The original formulation with aluminum oxide
as abrasive material still serves well today. Pikal metal polishing
compounds are widely used for polishing:
Supplied in a tube and is specially suitable for stainless steel
products and surfaces. Can be applied directly on the products and
polished with wipes.
Specifications:
Available in:
Zoloto Forged Brass Ball Valve (Screwed) ART NO 1008B
Salient Features:-
Test Pressure (Hydrostatic) :
Shell : 25 kg/cmg (350 psig)
Seat : 16 kg/cmg (225 psig)
Maximum Working Temperature : 220C
TECHNICAL INFOMATERIALS USED
Body | Forged Brass | IS 6912 Gr. FLB | 1 |
Bonnet | Forged Brass | IS 6912 Gr. FLB | 1 |
Ball | Forged Brass (Hard Chrome Plated) | IS 6912 Gr. FLB 1 | 1 |
Body Seat Ring | PTFE | BS EN 12086 1 | 2 |
Thrust Washer | PTFE | BSEN 12086 1 | 1 |
Gland Packing | PTFE | BSEN 12086 1 | - |
Stem | Forged Brass | IS 6912 Gr. FLB | 1 |
Gland | Forged Brass | IS 6912 Gr. FLB | 1 |
Lever | Mild Steel | 1 | |
Nut | Brass (Chrome Plated) | IS 6912 Gr. FLB | 1 |
SIZES / DIMENSIONS
8 | 47 | 1/4" | 37 | 90 |
10 | 47 | 3/8" | 37 | 90 |
15 | 50 | 1/2" | 40 | 106 |
20 | 58 | 3/4" | 43 | 132 |
25 | 67 | 1" | 51 | 132 |
32 | 76 | 1 1/4" | 65 | 166 |
40 | 87 | 1 1/2" | 72 | 180 |
50 | 104 | 2" | 80 | 216 |
65 | 139 | 2 1/2" | 102 | 216 |
80 | 155 | 3" | 110 | 280 |
100 | 177 | 4" | 124 | 280 |
KRANTI MAKE Woltman type Water Meters
Features
Buy Kranti 65 mm Kflow Cast Iron Body Flow Water Meter online in India at wholesale rates. If you have been looking for Kranti 65 mm Kflow Cast Iron Body Flow Water Meter dealers, your search ends here as you can get the best Kranti 65 mm Kflow Cast Iron Body Flow Water Meter distributors in top cities such as Delhi NCR, Mumbai, Chennai, Bengaluru, Kolkata, Chennai, Pune, Jaipur, Hyderabad and Ahmedabad. You can purchase Kranti 65 mm Kflow Cast Iron Body Flow Water Meter of the finest quality and rest assured to get the best in terms of both durability and performance. If you are bothered about the Kranti 65 mm Kflow Cast Iron Body Flow Water Meter prices, you can be totally sure to get the best rates as Industrybuying brings you genuine Kranti 65 mm Kflow Cast Iron Body Flow Water Meter rates and quality assured products only from the best of brands with exclusive brand discounts you wont find anywhere else. Procure Kranti 65 mm Kflow Cast Iron Body Flow Water Meter today and avail the best offers on your purchase.
KRANTI MAKE Woltman Type Water Meter
KRANTI MAKE Woltman type Water Metersare manufactured with State of art technology. Our Meters are MID marked and with Copper Can measuring Register thus ensuring IP68 Protection Category. The size range available is 50mm to 500mm.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union
Packaging Details : STD CARTOON PACKED
Delivery Time : EX STOCK
Double Window Sight Flow Indicators |
Being a client-centric organization, we are engaged in offering a wide range ofDouble Window Sight Flow Indicators.
Available in the sizes of 15 mm to 200 mm in all types of flanged &
threaded process connections, double window sight flow indicators can
be supplied optionally at max. op. temp. 200 C.
Features:
Other details:
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union
Packaging Details : STD
Delivery Time : EX STOCK
pnumatic die grinder sumake st 3170
S S Water Meter Flanged End ACCU FLOW MAKE
Woltman Water Flow Meter, which we offer, is manufactured using the best quality materials and components. These Woltman Water Flow Meter are used in Labs, Institutions, Industries, Residences, among others. These Woltman Water Flow Meter comply with set industrial standards for quality. Acclaimed for low pressure loss, dimensional accuracy, vacuum sealed registers and high sensitivity, these Woltman Water Flow Meter assure cleaner reading of the values.
Availability
Hot Cold
Class A Class B.
Size (50mm to 150mm)
Features Of Woltman Water Flow Meter
Cold water 0o-50oC
Hot water 50o-90oC
Max working pressure 16 bar
Mechanical transmission.
Direct reading by numerical rolls.
Low Head Lo
Product Image
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Delivery Time : EX STOCK
Specifications
model # | st-5552 (3/8" ratchet wrench) st-5553 (1/2" ratchet wrench) |
---|---|
square drive | 3/8" (#st-5552); 1/2" (#st-5553) |
capacity bolt size | 3/8" (#st-5552); 1/2" (#st-5553) |
free speed | 150 rpm |
max torque | 45 ft-lb (61n-m) |
overall length | 6-1/2" (165 mm) |
air consumption | 4. 0 cfm (113 l/min) |
recommend air pressure | 6. 5 kg/cm2 |
air lnlet (pt) | 1/4" |
air hose(id) | 3/8" |
net weight | 1. 2 kgs(2. 7 lbs) |
Details :
Specifications
P.No. | Name of Part | Material of Construction | Specification | Quantity |
---|---|---|---|---|
1 | Body | Bronze | IBR 282 (a) (iv) Gr. B | 1 |
2 | Screen (Ø1 mm Perforation) | Stainless Steel | Type 304 | 1 |
3 | Gasket | Steam Jointing Sheet | IS 2712 Gr. W/3 | 1 |
4 | Cover | Bronze | IBR 282 (a) (iv) Gr. B | 1 |
Temperature & Pressure Relief Valve
Temperature & Pressure Relief Valve (WYA-15)
Designed and checked Based on American ANSI Z21.22 Standard.
Using MethodTemperature and Pressure Relief Valves is suitable for Installing at the Pressurized solar water heater, gas heater, electric water heater , water heater of fuel, heat pump water heater , sensitive function heater, etc. various kinds of heaters( such as the boiler) and hot water containers . The valve will be opened at the set temperature and pressure to protect the water tank.
Technical Parameter
Set Pressure(Psi): 75, 87, 100, 125, 150psi (0.50.60.70.81.0MPa)
Set Pressure Tolerance: +5%, -10% of the set pressure.
Set Temperature: From 65 to99. (As youre required)
Set Temperature Tolerance: 99-5; other set Temperature is 5
PS: We can made different type of valves as youre required.
Dimensions/Weights
How to Installation
Temperature and Pressure Relief Valves should be installed on the top of the water heater top or side. The Temperaturesensing element must be immersed in the water within the top 6of the tank.
The eliminating pipeline should be installed under the relief valve. Its terminal station distance in floor drain should begreater than 6to make it easily remove and observe water
Direct Installed on the Top Direct Installed in the Side
How to Safeguard And Maintenance:
After installing water heater the users must lift the relief valve handle once at least every year, so as to ensure thatunblocked things in the waterway of the relief valve.
Before operating handles, please check the elimination pipeline which joining the relief valve, guaranteed that the hot waterfrom the relief valve discharge the proper place, otherwise it may cause the bodily injury.
If the handle is lifted, without water flowing out, it proves that the relief valve is invalid. Then it should turn off the waterheater immediately and check the valve.
Kobe 10mm Quick Change Reversible Pistol Air Drill FDP3175 |
Suitable for drilling and screwdriving. Rubber handle provides grip
and operator comfort. 3/8 Jacobs industrial keyless chuck. Stall
resistant. Short gear case design. Heavy duty gearing system with
oil-less bushing. Spring loaded rotor vanes. Rear exhaust. Ball bearing
construction for a long tool life. Comes with comprehensive
instructions.
Specifications:Free speed: 1, 800rpm.Chuck size: 3/8 (10mm)Air inlet thread: 1/4 NPT.Minimum air hose size (ID): 3/8 (10mm).Air pressure: 90PSI/6.2Bar.Air consumption: 3.35CFM*.Sound pressure level: 95 dB(A).Sound power level: 100 dB(A).Vibration level: 0.7 m/s2.Overall length: 188mm.Net weight: 1.39kg.
*Based on a 15 second cycle per minute average use.
SURFACE CONDITIONING & FINISHING Kit ( Kobe Make )
KBE-270-7000K
Multi-purpose
kit containing: one of each of the following surface preparation discs -
fine, medium & coarse. 2x abrasive disc grades - P36, P60, P80
& P120. 1x 6mm diameter shank to fit the backing pad. One Kobe angle
die grinder with 1/4" NPT air inlet thread for 10mm air hose, 90PSI air
pressure, 4CFM* air consumption. Supplied in a sturdy plastic carry
case.
*Based on a 15 second cycle per minute average use.Surface Conditioning & Finishing )
Helo Coil Tang Break-Off & Extraction Tools |
The driving tangs of helicoil inserts should be removed to eliminate their interference with the end of the assembled bolt. Their removal provides greater latitude in the depth location of the bolt. Manual tang break-off tools are available for use with inserts up through 18mm / 3/4" nominal diameter. Auto /spring loaded tang break-off tools are available for use with inserts up through 12mm / 1/2" nominal diameter. The operation of auto tang break-off tools is automatic, having a spring loaded, easily triggered punch that strikes a sharp, uniform blow against the tang of the installed insert. It can be operated with one hand. For larger sizes use long nosed pliers. Bend tang up and down to snap off at notch. Tools to remove helicoil inserts are available for ranges M1. 6, M2 M2. 2, 2. 5 - 4. 5mm, 3 - 8, . 5 - 10mm, 10 - 3/8", 11 - 24mm, 7/16" - 1", 27 - 39mm, 1-1/8" - 1-1/2". Extraction is done by applying the tool to the insert, striking the head of the tool a light blow and turning it counterclockwise, maintaining steady downward pressure. | |
SUMAKE MAKE Micro AIR Grinder KIT
MODEL NO -ST-3170 K (1/8"), KIT
Specifications:
MODEL NO -ST-3170 K (1/8"),
Free speed: 58, 000 RPM
Overall length: 5. 2" (132 mm)
Dimension: 0. 8" (20. 5 mm)
Air lnlet (pt): 1/4"
Air hose(id): 3/8"
Net weight: 0. 13 kgs(0. 28 lbs)
Air pressure: 6 kg/cm2 (90 psi)
Packing:30pcs/ctn/14 kgs/1. 31 cuft
Character:
* remain high torque and stabilize under high speed running.
* pu made handle with ergonomic design to ensure the lightness and handy under long time operation and precisely usage.
* low vibration, quietness and reduce heat energy by special design of the body.
* reduce the grinding dust by advance design of rear exhausting.
Wholesale Supplier of5 Way Teein India. Our 5 Way Tee
comes with an assurance of efficient working. Owing to their superior
quality, our 5 Way Tees are widely acclaimed for reliable performance
and high functional life.
Known For
Specifications
Technical data Rated power input 600 WNo-load speed 0 - 2800 rpm Power
output 301W Weight without cable 1, 7 kg Torque (soft screw driving
applications) 10, 8 Nm Rated torque 1, 8 Nm Drill spindle connecting
thread 1/2" 20 UNF Chuck capacity 1, 5 - 13 mm Length 266, 0 mm Height
180, 0 mm Impact rate at no-load speed 0 - 44800 bpm Drilling range
Drilling dia. in concrete 13 mm Drilling dia. in wood 25 mm Drilling
dia. in steel 10 mm Drilling dia. in masonry 15 mm Speed trigger with
electronic control for exact pilot drilling Rotating brush plate for
constant power in reverse and forward rotation Higher dynamic load rated
ball bearing for long life Auxiliary handle with depth stop for better
control Functions Infinitely variable speed control Forward/reverse
microelectronics.
We offer a wide assortment of polyester webbing slings woven from high tenacity 100% polyester yarn. These polyester webbing slings are manufactured to appropriate standards. These webbing slings are specially designed keeping in mind their delicate nature and functions.
Helio- coil save-a-thread thread repair kits are the easiest way to
permanently repair stripped spark plug hole threads, and is the only
thread repair product that can be used to repair both taperseat and
gasket type spark plug assemblies. The helicoil save-a-thread insert is
serrated at the top. When this portion of the insert is expanded, it
embeds itself into the spark plug port and will never come out! Helicoil
sav-a-thread repair kit contents: a helicoil piloted reamer tap. With
the tap, no drilling is necessary perfect alignment of the tapped hole
can be achieved three helicoil insert lengths, short, medium, and long,
are available to accommodate all spark plug reaches an expanding tool
Virtually
all engines built today have aluminum cylinder heads. This, combined
with the growing number of diy users, and the need for quick, easy,
on-the-spot repairs, make helicoil save-a-thread repair kits a must for
every store and shop.
Cordless Drill Driver GSR 10.8-2-lI ( Bosch MAKE ) |
Torque, max. (hard screw driving applications) 30 Nm Torque, max. (soft
screw driving applications) 13 Nm No-load speed (1st gear/2nd gear) 0 -
350 / 1300 rpm Chuck clamping range 1 - 10 mm Battery voltage 10, 8 V
Weight incl. battery 0, 95 kg Torque settings 20+1Drilling diameter Max.
drilling diameter in wood 19 mm Max. drilling diameter in steel 10 mm
Screw diameter Max. screw diameter 7 mm Unique Bosch Premium lithium-ion
technology for 400% longer lifetime and unbeatable battery runtime
Bosch Electronic Cell Protection (ECP): protects the battery against
overload, overheating and total discharge10mm Auto-lock chuck to cater
many types of accessories without an adapter.
Bag Closer Sewing Machine - Single Needle, Sing( Revo Make ) |
Revo Bag Closer Sewing Machine - Single Needle, Single Thread DA-R
Revo
DA is a single-thread chain-stitch portable filled bags closing sewing
machine. This robust machine stands up to the most demanding sewing jobs
on all types of paper, textile and poly bags made from HDPE/PP, etc. It
is simple to operate, even for inexperienced users. The reinforced feed
mechanism consisting of wider presser foot and feed dog with a bigger
throat plate than conventional single thread chain-stitch bag closing
machines helps achieve smoother, even and better looking plain and
folded top closures.
Revo bag closing machine housing is cast and
machined to close tolerance and the parts undergo suitable heat
treatment processes making them wear resistant, thus reducing downtime
and repair costs. This machine is dependable even under the most adverse
operating conditions in an agricultural or industrial environment.
Following features and benefits allow Revo bag closing machines to
handle the toughest bag closing jobs with reliable performance: