Wet blaster works on induction-suction principle of blasting. It is self-contain System which uses slurry of abrasive media  & water  to, descale  , clean and degrease surfaces in a single operation.  Fine abrasive particles are suspended in water and then pumped to a nozzle as slurry. The slurry is introduced into air-stream and propelled against the job , at the nozzle. The process is free of dust and is close-loop. Water acts as a buffer between metal & media to cushion the shock on delicate components. In this method cabinet hopper contains the slurry of abrasive and water(liquid). The slurry is continuously agitated to ensure a through mining of the abrasive and the liquid.  Slurry is drawn up by pump through flexible pipe to the nozzle of the blast gun. Where it is propelled by compressed air to increase the velocity. The hopper like bottom of blast cabinet, collected fired slurry from nozzle, from where it is passed to slurry pump for recycling. In blasting chamber  provide valve , which controlled the quantity of slurry to the blast nozzle. After wet blasting, washing gun will be provided for cleaning of job. Wet blaster machine is useful in tool room to remove feather burrs from multi tooth cutting tools such as milling   cutters,   taps eliminating hours of hand honing time and broaches. The machine surface can be treated without damage to sharp edges and exact tolerances.

Available in two standard models:
MMB-9182
MWB-12090

Options available on request:Higher output blast guns in place of standard.ON / OFF fitted with optional accessories.Foot operated treadle switches for blasting.High capacity slurry pump for high output.

Super Blaster works on induction-suction principle of abrasive delivery.Suction blaster  is recommended for light and medium sized components where the surface is to be cleaned. Suction Blaster is the simplest and most effective way to remove corrosion and old paint. Super Blaster is useful for heat treatment shops, tool, dye and mould makers and shot peening of light metal components etc. When the cabinet and power module are correctly set-up, the cabinet is ready for operation by actuation of the foot pedal. air to flow through the blast gun , when fully depressing the foot pedal. Air moving through the gun draws media into the blast gun mixing chamber. The media mixes with the air and is propelled out the nozzle. After striking the object being blasted, the blast media, along with fines, dust, and by products generated by blasting, fall through the grate into the cabinet hopper for separation, the particles are drawn into the reclaimer. Dust and fines are  separated in the reusable blast media , then  media is screened of oversize particles, and returned to the reclaimer hopper for reuse.  Dust and fines are drawn from the reclaimer into the dust collector which traps the dust. Discharging clean air , when the foot pedal is released the blasting stop.

Available in three standard models :

• MSB-6060
• MSB-9182
• MSB-12090

Options available on request :

• Reverse jet cartridge filter dust collectors.
• ON / OFF Fitted with optional accessories.
• Rubber lining inside walls of cabinets.
• Higher output blast guns in place of standard.
• Foot operated treadle switches for blasting.

Chilled iron shots are  used for cleaning in foundries, in castings for sand removal, for air blast applications, for removing of old paints, cleaning of castings, metallurgical materials, blasting for rolled steel before and after heat treatment, blasting of stone and for cutting of stone. Furthermore, these are also suitable for etch structural steel and components prior to coating with paint, metal spray & plastics. It is also used in surface preparation for electroplating, enameling, painting.

Lead shot is small balls of lead, traditionally made using a shot tower. They are mainly used for shielding atomic radiation from nuclear reactor. It is used for a variety of purposes.

Macro Fox Industries is the foremost destination in Jodhpur (Rajasthan) that has been trusted for its matchless sandblasting job work. We help clients attain a product with a specific design or shape, which we obtain through the sandblasting process for which we have set up a full-fledged facility in-house. We have different kinds of conventional as well as modernistic sandblasting equipment, which enable us to clients mid-sized requirements to the bulky ones.

Wet blaster works on induction-suction principle of blasting. It is self-contain System which uses slurry of abrasive media  & water  to, descale  , clean and degrease surfaces in a single operation.  Fine abrasive particles are suspended in water and then pumped to a nozzle as slurry. The slurry is introduced into air-stream and propelled against the job , at the nozzle. The process is free of dust and is close-loop. Water acts as a buffer between metal & media to cushion the shock on delicate components. In this method cabinet hopper contains the slurry of abrasive and water(liquid). The slurry is continuously agitated to ensure a through mining of the abrasive and the liquid.  Slurry is drawn up by pump through flexible pipe to the nozzle of the blast gun. Where it is propelled by compressed air to increase the velocity. The hopper like bottom of blast cabinet, collected fired slurry from nozzle, from where it is passed to slurry pump for recycling. In blasting chamber  provide valve , which controlled the quantity of slurry to the blast nozzle. After wet blasting, washing gun will be provided for cleaning of job. Wet blaster machine is useful in tool room to remove feather burrs from multi tooth cutting tools such as milling   cutters,   taps eliminating hours of hand honing time and broaches. The machine surface can be treated without damage to sharp edges and exact tolerances.

Available in two standard models:
MMB-9182
MWB-12090

Options available on request:Higher output blast guns in place of standard.ON / OFF fitted with optional accessories.Foot operated treadle switches for blasting.High capacity slurry pump for high output.

Super Blaster works on induction-suction principle of abrasive delivery.Suction blaster  is recommended for light and medium sized components where the surface is to be cleaned. Suction Blaster is the simplest and most effective way to remove corrosion and old paint. Super Blaster is useful for heat treatment shops, tool, dye and mould makers and shot peening of light metal components etc. When the cabinet and power module are correctly set-up, the cabinet is ready for operation by actuation of the foot pedal. air to flow through the blast gun , when fully depressing the foot pedal. Air moving through the gun draws media into the blast gun mixing chamber. The media mixes with the air and is propelled out the nozzle. After striking the object being blasted, the blast media, along with fines, dust, and by products generated by blasting, fall through the grate into the cabinet hopper for separation, the particles are drawn into the reclaimer. Dust and fines are  separated in the reusable blast media , then  media is screened of oversize particles, and returned to the reclaimer hopper for reuse.  Dust and fines are drawn from the reclaimer into the dust collector which traps the dust. Discharging clean air , when the foot pedal is released the blasting stop.

Available in three standard models :

• MSB-6060
• MSB-9182
• MSB-12090

Options available on request :

• Reverse jet cartridge filter dust collectors.
• ON / OFF Fitted with optional accessories.
• Rubber lining inside walls of cabinets.
• Higher output blast guns in place of standard.
• Foot operated treadle switches for blasting.

Chilled iron shots are  used for cleaning in foundries, in castings for sand removal, for air blast applications, for removing of old paints, cleaning of castings, metallurgical materials, blasting for rolled steel before and after heat treatment, blasting of stone and for cutting of stone. Furthermore, these are also suitable for etch structural steel and components prior to coating with paint, metal spray & plastics. It is also used in surface preparation for electroplating, enameling, painting.

Lead shot is small balls of lead, traditionally made using a shot tower. They are mainly used for shielding atomic radiation from nuclear reactor. It is used for a variety of purposes.

Macro Fox Industries is the foremost destination in Jodhpur (Rajasthan) that has been trusted for its matchless sandblasting job work. We help clients attain a product with a specific design or shape, which we obtain through the sandblasting process for which we have set up a full-fledged facility in-house. We have different kinds of conventional as well as modernistic sandblasting equipment, which enable us to clients mid-sized requirements to the bulky ones.