Post Buy Requirement
MS
Mumbai, Maharashtra, India
Verified Add Review

Mild Steel Bar #2962686

MS Square Bars

Mahavir Steel supplies a wide range of Mild Steel (MS) Square Bars. MS Square Bars are used in cranes gantry, bullock carts axles, conveyors, truck trailers and tippers, bright bars, anchor bolts and many more engineering industries.


MS Square Bars : 10mm to 56 mm


Chemical compositions & Mechanical properties


The data given above is indicative. Actual weights may vary.


MAHAVIR STEEL INDUSTRIES developes specific sections. Specific sizes in any section can be developed for economical and feasible quantity, in Mild Steel, High Tensile, En 8 / En 8D / EN 9 / EN 16 material.



Size in mm Average Weight
KG/MTR KG/FT
10 x 10 0.80 0.20
12 x 12 1.10 0.30
14 x 14 1.50 0.50
16 x 16 2.00 0.60
17 x 17 2.27 0.69
20 x 20 3.14 1.00
25 x 25 4.90 1.50
32 x 32 8.00 2.40
40 x 40 12.60 3.80
42 X 42 13.85 4.22
50 x 50 19.60 6.00
53 X 53 22.05 6.72
56 x 56 24.60 7.50
63 x 63 31.20 9.50

 

Rolling Tolerances
Size Out of squareness Weight Length
up to 25 mm ± 0.5 mm
25 mm to 35 mm ± 0.6 mm
35 mm to 50 mm ± 0.8 mm
50 mm to 80 mm ± 1 mm
80 mm to 100 mm ± 1.3 mm
100 mm and above ± 1.6 % of side width.
± 75 % of total tolerance Specified on the size. Size 10 to 16 mm ± 5 %
16 mm and above ± 3 %
For fixed length : ± 100 mm






View Complete Details

MS Flat Bars

Mahavir Steel supplies a wide range of Mild Steel (MS) Flat Bars. MS Flat Bars are used by Grating manufactures, cable trays, bright bar industries, automobile and auto-ancillaries, Truck trailers, Tippers, Railways, bus body, elevators and escalators, Scaffolding manufacturers, Base plates, Earthing material, Ship building, washers, flanges, clamps and many more engineering industries.


MS Flats : Width 25 to 300 mm. & Thickness 5 to 50 mm.


Chemical compositions & Mechanical properties


The data given above is indicative. Actual weights may vary.


MAHAVIR STEEL INDUSTRIES developes specific sections. Specific sizes in any section can be developed for economical and feasible quantity, in Mild Steel, High Tensile, En 8 / En 8D / EN 9 / EN 16 material.


Size in mm Average Weight
KG/MTR KG/FT
20 x 4 0.79 0.24
20 x 5 0.79 0.24
21 x 6 1.00 0.30
25 x 5 0.98 0.30
25 x 6 1.18 0.40
25 x 8 1.57 0.50
25 x 10 1.9 0.60
25 x 12 2.36 0.70
28 x 6 1.30 0.40
30 x 5 1.18 0.40
30 x 6 1.40 0.40
32 x 5 1.26 0.40
32 x 6 1.50 0.50
32 x 8 2.00 0.60
32 x 10 2.50 0.80
32 x 12 3.00 0.90
38 x 3 0.90 0.30
38 x 5 1.50 0.50
38 x 12 3.60 1.10
40 x 5 1.57 0.50
40 x 6 1.90 0.60
40 x 8 2.50 0.80
40 x 10 3.10 1.00
40 x 12 3.77 1.20
40 x 16 5.00 1.50
40 x 20 6.30 1.90
40 x 25 7.85 2.40
45 x 12 4.20 1.30
50 x 4 1.57 2.00
50 x 5 1.96 0.60
50 x 6 2.36 0.70
50 x 8 3.14 1.00
50 x 10 3.90 1.20
50 x 12 4.7 1.40
50 x 16 6.28 1.90
50 x 20 7.85 2.40
50 x 25 9.80 3.00
50 x 32 12.56 3.83
63 x 6 3.00 0.90
65 x 6 3.06 0.93
65 x 8 4.08 1.20
65 x 10 5.10 1.60
65 x 12 6.10 1.90
65 x 16 8.16 2.50
65 x 20 10.20 3.10
65 x 25 12.80 3.9
65 x 32 16.33 4.98
65 x 40 20.41 6.22
65 x 50 25.51 7.78
75 x 6 3.53 1.10
75 x 8 4.71 1.40
75 x 10 5.89 1.80
75 x 12 7.07 2.10
75 x 16 9.42 2.90
75 x 20 11.80 3.60
75 x 25 14.70 4.50
75 x 32 18.90 4.50
75 x 40 23.60 7.20
75 x 50 29.44 8.97
100 x 6 4.71 1.40
100 x 8 6.28 1.90
100 x 10 7.85 2.40
100 x 12 9.42 2.90
100 x 16 12.56 3.80
100 x 20 15.70 4.80
100 x 25 19.60 6.00
100 x 32 25.12 7.66
100 x 40 31.40 9.57
100 x 50 39.25 11.96
125 x 6 5.90 1.80
125 x 8 7.90 2.40
125 x 10 9.80 3.00
125 x 12 11.80 3.60
125 x 16 15.70 4.80
125 x 20 19.60 6.00
125 x 25 24.50 7.50
125 x 32 31.40 9.57
125 x 40 39.25 11.96
130 x 12 12.25 3.73
150 x 6 7.07 2.20
150 x 8 9.42 2.90
150 x 10 11.80 3.60
150 x 12 14.10 4.30
150 x 16 18.80 5.70
150 x 20 23.60 7.20
150 x 25 29.40 8.90
150 x 32 37.68 11.48
150 x 40 47.10 14.36
178 X 6 8.38 2.56
178 X 8 11.18 3.41
200 x 6 9.40 2.90
200 x 8 12.56 3.80
200 x 10 15.70 4.80
200 x 12 18.80 5.70
200 x 16 25.10 7.70
200 x 20 31.40 9.60
200 x 25 39.20 12.00
250 x 6 11.80 3.60
250 x 8 15.70 4.80
250 x 10 19.60 6.00
250 x 12 23.60 7.20
250 x 16 31.40 9.60
250 x 20 39.20 12.00
250 x 25 49.10 15.00
300 x 6 14.10 4.30
300 x 8 18.80 5.80
300 x 10 23.55 7.20
300 x 12 28.30 8.60
300 x 16 37.70 11.50
View Complete Details

MS Bright Bars

  • Size in mm 14
MS bright bars Specific sizes in any section can be developed for economical and feasible quantity, in Mild Steel,
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Ranjiit Chakraborty (Mahavir Steel Industries Limited)
  • 417-419 Vyapar Bhavan. Mumbai400009, Masjid Bunder, Maharashtra, India
  • Share us via
  • Call 08068051364 Ext. 246
Retailer of Mild Steel Bar from Mumbai, Maharashtra by Mahavir Steel Industries Limited
Post Buy Requirement
MS
Mumbai, Maharashtra, India
Verified Add Review

Mild Steel Bar #2962686

MS Square Bars

Mahavir Steel supplies a wide range of Mild Steel (MS) Square Bars. MS Square Bars are used in cranes gantry, bullock carts axles, conveyors, truck trailers and tippers, bright bars, anchor bolts and many more engineering industries.

MS Square Bars : 10mm to 56 mm

Chemical compositions & Mechanical properties

The data given above is indicative. Actual weights may vary.

MAHAVIR STEEL INDUSTRIES developes specific sections. Specific sizes in any section can be developed for economical and feasible quantity, in Mild Steel, High Tensile, En 8 / En 8D / EN 9 / EN 16 material.

Size in mm Average Weight
KG/MTR KG/FT
10 x 10 0.80 0.20
12 x 12 1.10 0.30
14 x 14 1.50 0.50
16 x 16 2.00 0.60
17 x 17 2.27 0.69
20 x 20 3.14 1.00
25 x 25 4.90 1.50
32 x 32 8.00 2.40
40 x 40 12.60 3.80
42 X 42 13.85 4.22
50 x 50 19.60 6.00
53 X 53 22.05 6.72
56 x 56 24.60 7.50
63 x 63 31.20 9.50

 

Rolling Tolerances
Size Out of squareness Weight Length
up to 25 mm ± 0.5 mm
25 mm to 35 mm ± 0.6 mm
35 mm to 50 mm ± 0.8 mm
50 mm to 80 mm ± 1 mm
80 mm to 100 mm ± 1.3 mm
100 mm and above ± 1.6 % of side width.
± 75 % of total tolerance Specified on the size. Size 10 to 16 mm ± 5 %
16 mm and above ± 3 %
For fixed length : ± 100 mm






View Complete Details

MS Flat Bars

Mahavir Steel supplies a wide range of Mild Steel (MS) Flat Bars. MS Flat Bars are used by Grating manufactures, cable trays, bright bar industries, automobile and auto-ancillaries, Truck trailers, Tippers, Railways, bus body, elevators and escalators, Scaffolding manufacturers, Base plates, Earthing material, Ship building, washers, flanges, clamps and many more engineering industries.

MS Flats : Width 25 to 300 mm. & Thickness 5 to 50 mm.

Chemical compositions & Mechanical properties

The data given above is indicative. Actual weights may vary.

MAHAVIR STEEL INDUSTRIES developes specific sections. Specific sizes in any section can be developed for economical and feasible quantity, in Mild Steel, High Tensile, En 8 / En 8D / EN 9 / EN 16 material.

Size in mm Average Weight
KG/MTR KG/FT
20 x 4 0.79 0.24
20 x 5 0.79 0.24
21 x 6 1.00 0.30
25 x 5 0.98 0.30
25 x 6 1.18 0.40
25 x 8 1.57 0.50
25 x 10 1.9 0.60
25 x 12 2.36 0.70
28 x 6 1.30 0.40
30 x 5 1.18 0.40
30 x 6 1.40 0.40
32 x 5 1.26 0.40
32 x 6 1.50 0.50
32 x 8 2.00 0.60
32 x 10 2.50 0.80
32 x 12 3.00 0.90
38 x 3 0.90 0.30
38 x 5 1.50 0.50
38 x 12 3.60 1.10
40 x 5 1.57 0.50
40 x 6 1.90 0.60
40 x 8 2.50 0.80
40 x 10 3.10 1.00
40 x 12 3.77 1.20
40 x 16 5.00 1.50
40 x 20 6.30 1.90
40 x 25 7.85 2.40
45 x 12 4.20 1.30
50 x 4 1.57 2.00
50 x 5 1.96 0.60
50 x 6 2.36 0.70
50 x 8 3.14 1.00
50 x 10 3.90 1.20
50 x 12 4.7 1.40
50 x 16 6.28 1.90
50 x 20 7.85 2.40
50 x 25 9.80 3.00
50 x 32 12.56 3.83
63 x 6 3.00 0.90
65 x 6 3.06 0.93
65 x 8 4.08 1.20
65 x 10 5.10 1.60
65 x 12 6.10 1.90
65 x 16 8.16 2.50
65 x 20 10.20 3.10
65 x 25 12.80 3.9
65 x 32 16.33 4.98
65 x 40 20.41 6.22
65 x 50 25.51 7.78
75 x 6 3.53 1.10
75 x 8 4.71 1.40
75 x 10 5.89 1.80
75 x 12 7.07 2.10
75 x 16 9.42 2.90
75 x 20 11.80 3.60
75 x 25 14.70 4.50
75 x 32 18.90 4.50
75 x 40 23.60 7.20
75 x 50 29.44 8.97
100 x 6 4.71 1.40
100 x 8 6.28 1.90
100 x 10 7.85 2.40
100 x 12 9.42 2.90
100 x 16 12.56 3.80
100 x 20 15.70 4.80
100 x 25 19.60 6.00
100 x 32 25.12 7.66
100 x 40 31.40 9.57
100 x 50 39.25 11.96
125 x 6 5.90 1.80
125 x 8 7.90 2.40
125 x 10 9.80 3.00
125 x 12 11.80 3.60
125 x 16 15.70 4.80
125 x 20 19.60 6.00
125 x 25 24.50 7.50
125 x 32 31.40 9.57
125 x 40 39.25 11.96
130 x 12 12.25 3.73
150 x 6 7.07 2.20
150 x 8 9.42 2.90
150 x 10 11.80 3.60
150 x 12 14.10 4.30
150 x 16 18.80 5.70
150 x 20 23.60 7.20
150 x 25 29.40 8.90
150 x 32 37.68 11.48
150 x 40 47.10 14.36
178 X 6 8.38 2.56
178 X 8 11.18 3.41
200 x 6 9.40 2.90
200 x 8 12.56 3.80
200 x 10 15.70 4.80
200 x 12 18.80 5.70
200 x 16 25.10 7.70
200 x 20 31.40 9.60
200 x 25 39.20 12.00
250 x 6 11.80 3.60
250 x 8 15.70 4.80
250 x 10 19.60 6.00
250 x 12 23.60 7.20
250 x 16 31.40 9.60
250 x 20 39.20 12.00
250 x 25 49.10 15.00
300 x 6 14.10 4.30
300 x 8 18.80 5.80
300 x 10 23.55 7.20
300 x 12 28.30 8.60
300 x 16 37.70 11.50
View Complete Details

MS Bright Bars

  • Size in mm 14
MS bright bars Specific sizes in any section can be developed for economical and feasible quantity, in Mild Steel,
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Ranjiit Chakraborty (Mahavir Steel Industries Limited)
  • 417-419 Vyapar Bhavan. Mumbai400009, Masjid Bunder, Maharashtra, India
  • Share us via
  • Call 08068051364 Ext. 246