Why Pre-Engineered Building ?
Best aesthetic look, fast, economical & high quality were the base requirement for Pre-Engineered Buildings. Though, It's been a best option to choose, because of its following benefits like cost effectiveness, less time consuming as compared to other conventional buildings. Also, it's faster than conventional buildings, thus, it takes 25 % less time consuming and also it has been 30% lighter than conventional buildings. Firstly, the plan and load on the building was calculated, and then it was manufactured in factory and then assembled on actual site at the time of construction.

Because of its speed, quality value it appeals to all parties involved in the project as one of its advantages.Design and build was a practice that differentiate it from all other buildings. It well suited to the industries. It was found to be cheap, fast to erect and can move to another site .such structures are also known as "Metal Boxes", "Tin Sheds" they were in rectangular shaped closed with corrugated with metal sheeting's.

A turnkey project solution is that kind of a solution that can be effortlessly deployed into a present system, business or a process by a third-party member. This solution can be used after it gets implemented and installed, the same as that of a billing system or a training program. A turnkey project solution eliminates the burden and headaches of setting up your own solution. So simply a turnkey project solution is a contract under which a resistant accepts to construct and design a business or a service facility for turning it over to the buyer when it is fully ready to work.

What is meant by the term peb?
peb is the abbreviation for a pre-engineered building. Peb with civil work is designed by a peb manufacturer or a supplier and is forged using the best-quality resources and raw materials which come from various sources. In the peb process, many manufacturing methods are implemented to satisfy a wide range of services and requirements. These buildings can also be known as pre-engineered metal buildings or engineered metal buildings. But out of all pre-engineered buildings are becoming popular because of the increase in demand for computer-aided designs.

Advantages of peb with civil work
* less expensive: the erection, design and the manufacturing cost is less.
* quality: usually a pre-engineered building is designed under good monitoring. So the quality of peb is assured.
* flexible: peb with civil work is very flexible as expanding and contracting can be done very easily.
* less maintenance: peb's provide lower maintenance costs and long durabilities.
* time-taken: the time taken for the construction of peb's is faster and also the construction cost tends to be lower due to faster occupancy.
* sizeable spans: a peb will civil work can easily be given up to 90 meters which are equal to clear column space.

What are mezzanine buildings?
mezzanine buildings are the ones with an intermediary floor in-between the main floors of a building so that there won't be any confusion among the other floors of a building. Mezzanine buildings usually have low-level ceilings and balcony included in their projects. Mezzanine is a term that is also used to describe the shortest theatre balcony or the starting rows of the theatre. Mezzanine buildings are inspired by the italian term "mezzanine" which means middle.

Mezzanine buildings have floor systems that are temporary ones and can be installed within the building that is constructed between two native floors. Such kind of structures can be easily relocated or collapsed in many cases. There are three main materials used for the construction of mezzanine buildings and they are fiberglass, steel, and aluminum. These three materials are the best suited in building perfect mezzanine buildings. There will be a variation in the applications for both flooring and decking. They have control over wood products, b-deck underlayment, aluminum, fiberglass gratings, and heavy-duty steels.

Puf Panel Buildings consist of the panels which are appropriate for a wide range of applications. Puf Panel Buildings usually comprise a rigid core, mettalic structured boards. These are sandwich panels that merge studs, vapors, insulations, barriers, joists, etc. together. Puf panels are very efficient and easy for installation. They are very much affordable and serve a big-time purpose for roofs, exterior walls, foundations, meat and poultry industries, commercial spaces, industrial buildings, warehouses, fruit, and vegetable storages, telecom shelters, clear rooms, chambers, seafood storages, floriculture industries, dairy and, milk storages, etc.

Features Of Puf Panel Buildings
Limitless dimensional requirements can be satisfied.
Acoustic insulation and thermal insulation will be improved.
Economical benefits will be there due to energy savings.
High bearing of load capacity.
Durability will last for a lifetime.
Water and vapor resistance is top-ranking.
The design options are very flexible.
Requirements are of low maintenance.
Overall installation is very simple and easy.
The Puf panels are ready to use and very pleasing.
There won't be any need for masonry due to the structure of the panel.
Weatherproof guarantee lasts for a lifetime.
Fire emergencies can be controlled due to the existence of a self extinguisher which reduces the flames automatically and eliminates the damage that can be caused.
The panels used here are 100% eco-friendly and do not harm the environment at any cost. Eg: Polyutherane foam panels.
Puf panel buildings are resistant to bacteria, fungus, etc.
These panels are also unaffected by any sorts of physical impacts like corrosion, termites, etc.

Schools are places where children come to learn things. This is why school needs to be a place where they can sit and learn things in a comfortable manner. For this, the schools should be built with proper planning. The structure and layout should be planned with diligence and keeping in mind all these aspects. Prefabricated schools are the schools that are designed in keeping modern day world in mind. There are many facilities that one can experience in a prefabricated school.

The prefabricated buildings are a lot in the trend these days. They are created using the process of prefabrication. The units are mostly factory made. These units are assembled on the site to form the complete structure which is called prefabricated buildings.

Steel structured buildings are those type of buildings which are built in a metallic structure by using steel. These steel structured buildings are built for supporting many purposes like exterior cladding and interior support. Buildings which are meant for living accommodations, storage, work areas, etc. can be constructed with steel so that there will be a sense of security and support.

The business of the warehouse is increasingly addressing the specific needs of the customers such as providing open storage, food storage, storage with crane facilities, storage with multi-level stacking and bare storage. The concept of PEB technology has started to become the center of attraction across the country especially in the industry of Agro and Food and Beverages, because of the series of measures that have been announced by the government in order to offer appropriate warehousing as well as cold storage facilities for the different types of food grains, fruits and vegetables, etc. Lack of available temperature controlled warehouses that are located close to the farms and transportation of the same in the temperature controlled vehicles is becoming a major cause of concern as it significantly affects the quality, integrity as well as longevity of the goods.

The well maintained PEB warehouse even helps to enhance the life of the product because the PEB technology acts as a significant contributor. The reason for this is the environmentally friendly nature along with the temperature control environment capacity of the PEB warehouse.

In the modern day busy working environment, the priority of any business house is the need to have an economical and commercial construction. This is where the Pre Engineered Buildings, especially the Factory /PEB sheds completely fit the need of time. The PEB factory sheds have revolutionized the market in the area of construction, by using build ups in the place of the traditional building techniques. Considered to be one of the very sophisticated factory sheds, theses Pre Engineered Building is created from the structural members which are lighter in weight and provide a number of notable advantages

When you are planning to use prefabricated buildings, there are so many advantages over other building materials. It can be customized as per your requirements; the speed of the construction is extremely good and the maintenance cost and effort are comparatively less for the prefabricated metal buildings. Everyone say, nothing can beat a metal building that is true in the case of prefabricated metal buildings!

Stronger And Customized Metal Buildings
The intended use of prefabricated metal buildings are warehouses, retail spaces, homes and event centers. It is simply created with the help of steel at the Manufacturing Plant and can be immediately delivered at the job site when put together. It is a wonder in architecture as we can create separate panels with desired textures and colors to retain the strength of the steel.

Being a certified ISO 9001: 2015 company, we are serving customers for the past decade with an aim to deliver best-in-class infrastructural services.

Multi story buildings are in high demand because people like to reside in multi-story buildings. It is said that theres a limit of four-storey constructions. Multi-story building is something which is a 3-dimensional building that has multiple storeys as the name infers. It will contain vertical circulation with the help of stairs and lift. Based on the preliminary analysis, the buildings will be in a certain height. It is generally designed for commercial purposes and residential purposes.

Cold storage is something that withstands excess amount of cold and there are a lot of businesses that handle perishable amount of cold or temperature sensitive business. Cold storage warehouses are in trend now where the business owners will find time to store the products safely.

Cold storage is not only about storing the product, it is the way of shipping too. If you are running a temperature sensitive business, then you might need a work place that is cold resistant. You should have a cold storage room in your company when your building the company. Ensure that the room will fit all the products you prefer. If you are just starting just a small cold storage will do your job. When your business is quite big, then comes the cold storage warehouses. When you need to store substantial number of products, these will help you grow and expand your business.

Industrial sheds are something al the industry owners are aware of. There are a lot of technicalities involved when constructing industrial sheds. The materials used for construction have direct effect on the stability of the buildings and sheds. Steel frames are the best choice for these types of constructions.

Industrial sheds will deal with a lot of heavy metals hence it has to be stronger than those metals. Using steel frames for these buildings will make it exceptionally stable and strong. Structural steel is the best construction material and is mostly used for industrial sheds. It should be used efficiently and properly to make the building strong, rigid and durable.

A place where stock items are stored is nothing but a go down. Any business will surely have a go down. Raw materials, finished goods will be stored on go downs. Few businesses who have big turn around will also have separate go downs for each. It is a commercial building used for storing finished products or raw materials. When compared with warehouses, it will take less space and usually not organized. It will have no proper safety measures followed. No one really takes care of a go down as it is used for short-term storage.

Go Down Should Be Given Its Due Value
Take care of your go down, it will take care of your business. A go down is something which will usually be built underground, since it is easily accessible. Employees should feel easy to commute from go down to the selling place. Else, shipping them will become a problem. Easy access to other places from go down is very important. We at Mak Building, create durable and quality god owns. Usually god owns are not given any importance but we would say that it must be given the utmost importance of all other places. It is a place where our business grows and hence it must be taken care. Any go down built must be stronger, durable and should be weight resistant. From the godown, there should be 3-4 ways to exit. Any emergencies will put you on stake. Since it is preferred to be underground, we should use steel for weigh resistance.

Petrol filling pumps and CNG pumps are often covered with a different canopy which is known as the petrol pump canopy. A petrol pump canopy is a very essential part of a petrol pump for ensuring safety. This canopy should be of very high quality and it is to be installed under professional guidance and supervision. These canopies must be quality tested and assured before being installed for safety purposes. Before manufacturing a petrol pump canopy to the client, the manufacturer should check controllers on several parameters and then deliver the product.

Toll plaza shed is a very important construction that is necessary for highways since it creates segregation on the path. The shed provides various help to the people travelling on the highway. It not only works for the travellers but also for the workers since it provides shed for them in adverse condition.