Roll Forming & Bending Machines #5335703

Standard Accessories: 4 edge blade, front back & side gauge, sheet hold-down with built-in finger guard, oil can.C. I. Body (except Model: CTS-6 which is of steel body)- Permanent blade clearance setting (which enables burr free cuts on thin and silicon sheets), Supplied with Built-in Finger Guard, - Four Edge Blade.

Enriched with vast industrial experience, we are involved in manufacturing and supplying a wide range of Bolt Making Machines. Our machines are precisely engineered in accordance with world class standards and using best quality components. These machines are widely used for free work flow and maximum productivity. Our machines are acclaimed for uninterrupted performance and maximum efficiency.

FEATURES:

- Machines comprise of six / ten work rolls arranged in pairs- Rolls quickly and easily adjustable angularly to give perfect contact between the tube and the roll, over the maximum effective roll profile- Simple setting of the machine for different sizes of tubes- All rolls driven by two identical electric motors- Machines fitted with indicators for vertical and angular setting of rolls- Machines available in Single Speed and Variable Speed Options

To obtain best results from the machine, correctly designed inlet and outlet through are essential because the tube rotates at high speed and must be controlled before and after straightening.

ROLLS: Made from Alloy Steel, Hardened, Hyperbolic Profile Ground and Lapped. Hyperbolic Profiles designed to accept wide range of tube diameters

ROLL CARRIERS: Designed to give maximum Roll Stability even when fully extended

MAIN DRIVE: Drive to the rolls by two totally enclosed gear boxes, each having three/five output shafts, connected by universal joints. Bottom rolls and Upper Rolls driven independently. Gears are single helical made from Alloy Steel, hardened & ground. Motors connected to the input shaft of the gear boxes by flexible coupling / V belts

ENTRY GUIDES: Entry guides made from Special Elastomer provided for the entire range

GUARDS: Perspex transparent screen guard provided in front of the rolls.

CONTROL PANEL: A control panel housing all electrical controls for running the machine provided.

- Used for cutting printed sheets with accuracy- Model: CTS-3L- C. I. Body- Permanent blade clearance setting (which enables burr free cuts on thin and silicon sheets)- Capacity Width: 1000 mm- Capacity Thickness: 1.0 mm- Net Weight: 275 kgs.- Dimensions: 1.38 x 0.69 x 1.00 m- Shipping Volume: 0.96 m3

Standard Accessories: 4 edge blade, front back & side gauge, sheet hold-down with built-in finger guard, oil can.

Machines comprise of six ten work rolls arranged in pairs, Rolls quickly and easily adjustable angularly to give perfect contact between the tube and the roll, over the maximum effective roll profile, Simple setting of the machine for different sizes of tubes, All rolls driven by two identical electric motors.

Suitable for small batch production jobs in lieu of big blanking dies and punches, Useful for Sheet Metal Fabrication Industry, Electric Control Panel Makers, Cabs and Vehicle body makers, automobile fabrication manufacturers, etc.Length of tool stroke easily adjusted on variable steps, Different operations need different tools, The upper and bottom tools are changed in operation of beading, folding, flanging and punching, The working principle of the nibbling machine is that the sheet is cut or formed between the fast reciprocating motion of the upper tool (powered by an electric motor and driven by an eccentric crank) and a stationery lower tool, by progressive punching as the sheet is fed.

Standard Accessories: Electric Motor, Starter, One Set of Toolings of any one size of Bolt, Length of Blank:12" - 2", 34" - 3", 1" - 4", 1 12" - 5", Wire Diameter Bolt Diameter: 316" - 14", 14" - 38", 516" - 12", 38" - 58".

Designed for the production of precision Spur, Helical & Worm Gears, Splines, Sprockets, Ratchet Wheels and any other form that can be hobbed, Bed and Column of Close Grain Casting, well ribbed with 'V' type guide ways, Shafts and Gears of Alloy Steel, Indexing Worm Wheel of high grade Bronze material, Machine equipped with differential mechanism for cutting Helical Gears, Provision made to remove backlash between the indexing worm and worm gear and also between feed screw and the nut of the hob slide, Oil reservoirs provided to ensure through lubrication of gears and bearings.

Features:- Automatic pre-clamping of pile of books- Automatic pile slide into cutting station- Feeding of books away from the knife zone (cutting station)- Stepless, auto-adjustable, hydraulic book clamping- Electromagnetic drive clutch & brake system- Automatic cycle control- Quick change knife setting- Easy set-up & job change over- Centralized lubrication system

Electric motor, V-belt, Starter, Lubrication pump, One set of blades, Side rack (to support the wheel) Capacity:1", Main Gear: 26", Fly Wheel Diameter: 20"

Owing to our rich industry experience, we are offering Portable Pipe Threading Machine to the clients. This machine is portable and used for threading the pipes in the industries. The excellent quality components provided in this Portable Pipe Threading Machine are responsible for the smooth operation of this Portable Pipe Threading Machine. This Portable Pipe Threading Machine is coated with corrosion resistant material.

C. I. Body (except Model: CTS-6 which is of steel body), Permanent blade clearance setting (which enables burr free cuts on thin and silicon sheets), Supplied with Built-in Finger Guard.

This shear strikes slowly by hydraulic cylinder. The shear comprises a fixed lower knife beam and upper moving knife beam actuated by one hydraulic cylinder. A Spring operated sheet clamp will be provided to hold the sheet during the shear operation. A Hydraulic Unit provides hydraulic power for the shear. It comprises a hydraulic pump and A.C. motor mounted on a mild steel tank base plate. The unit is complete with oil filter, filler cap, oil level indicator with dial and the necessary supply and return flanges. A control station is supplied and is situated in a convenient position. The station contains the necessary pressure gauge, control valves, other hydraulic valves and necessary piping.

Heavy Cast Frame, Ribbed for strength, Cast Tapered Central Ram and machined Guide ways, Top end of screw with hexagonal tapered reception for the wheel to ensure no slip, Mild Steel screw with heavy duty square angular thread, Bed provided with T slots and adjustable steel die holding clamps.

JMTC Hand Operated Shearing Machine is available in a wide variety of Sheet Shearing Capacities and different metals. Hand Operated Shearing Machines are heavy duty in design and designed to work for long periods without maintenance and breakdown. The materials used in the these machines are of high quality to ensure mass production and long life.

Electric Motor, Starter, One Set of Toolings of any one size of Bolt Length of Blank:12" - 2" , Wire Diameter Bolt Diameter:316" - 14"

Sections smaller then the machine capacity should not be cut. A separate section blade with plate guide for section should be purchased for every size of section

- All fabricated design- Supplied with hydraulic power pack with 3 HP motor complete with 15 Tons hydraulic cylinder double acting, hydraulic pump, foot switch, limit switch, etc.- Capacity maximum chambering length x width: 1800 x 100 mm- Supplied with one set of die and punch for hot leaves chambering

Operation: - The downward Movement of the press is operated by a foot switch. On releasing the foot switch, the press goes upwards and stops at the position of the limit switch. By adjusting the position of the limit switch, we can control the stroke of the hydraulic cylinder.- The position of the bottom die can be lowered by fitting it in the additional holes provided on the side beams.

- Machine made of M.S. sections and flats. An all steel body, nut bolted and welded structure- Used for cutting EN-45 steel spring flats- Equipped with alloy hardened cutting blades- Shaft and pinion are of forged steel. Gears of Cast Iron (hobbing machine cut)- Speed: 38 strokes a minute- Operation by clutch system, operated by a foot lever- Drive through a 5 HP electric motor with necessary pulley and 'V' belts- Capacity to cut maximum 200 mm wide x 20 mm thick EN-45 flats

- Machines are gear driven and the speeds can be changed by pulley- They are suitable for inside as well as outside threading with taps & round split dies respectively- In the Vertical model machine, the spindle of machine travels automatically with the help of a suitable lead screw (as per the threading job). The travel of the spindle can be reversed and stopped with the help of limit switches provided- All the gears and shafts are tempered and ground and the pillar shafts are hard chromed- In the Horizontal model machines, the tailstock moves with gunmetal bushes on Hard Chromed Shafts- In the Horizontal model machines, the threading can be controlled to the desired position and reversed by a built-in stopper (in model Horizontal TR-20/25) and by limit switches control stopper (in model Horizontal TR-20/40).

Standard Accessories: Electric Motor, Panel Board, Jig Fixture, one set of lead screw, die holders for round split dies for outside threading of size 1", 1.5" and 2", tap holders for inside threading of range up to 13 and 40 mm, coolant system including electrical pump, tank, filters, etc.Optional Accessories: 150 mm Self Centering Chuck in lieu of jig fixture, additional sets of lead screw as per job requirement