Mumbai, Maharashtra, India
Verified
Add Review
Our Products
In electronic systems, a heat sink is a passive heat exchanger that cools a device by dissipating heat into the surrounding medium.Heat sinks are used with high-power semiconductor devices such as power transistors and optoelectronics such as lasers and light emitting diodes (LEDs), where the heat dissipation ability of the basic device is insufficient to moderate its temperature.
We are having many kind of battery which are use for multipurpose used by user. we are offering lithium battery, non-lithium battery , rechargeable battery. coin type battery.etc.
A malfunction indicator lamp (MIL), also known as a check engine light, is a tell-tale to indicate malfunction of a computerized engine management system. It is found on the instrument panel of most automobiles.
A power strip (also known as an extension block, power board, power bar, plug board, trailer lead and by many other variations) is a block of electrical sockets that attaches to the end of a flexible cable (typically with a mains plug on the other end), allowing multiple electrical devices to be powered from a single electrical socket. Power strips are often used when many electrical devices are in proximity, such as for audio/video and computer systems. Power strips often include a circuit breaker to interrupt the flow of electric current in case of an overload or a short circuit. Some power bars provide protection against electrical power surges
Zero insertion force (ZIF) is a type of IC socket or electrical connector that requires very little force for insertion. With a ZIF socket, before the IC is inserted, a lever or slider on the side of the socket is moved, pushing all the sprung contacts apart so that the IC can be inserted with very little force - generally the weight of the IC itself is sufficient and no external downward force is required. The lever is then moved back, allowing the contacts to close and grip the pins of the IC. ZIF sockets are much more expensive than standard IC sockets and also tend to take up a larger board area due to the space taken up by the lever mechanism
Timers are used whenever electrical equipment must be periodically switched on and off at preprogrammed daily or weekly times. The programmed events are then repeated during the next periods accordingly. They find broad application in heating and refrigerating systems, boilers, ovens, dryers, defrosting equipment, swimming pools, hatcheries, illumination, etc.
TestPath features a complete line of modular test leads and probe bodies for general purpuse electronic test equipment. Modular test accessories allow any test lead to be interconnected with any other probe body, test clip that has a banana jack termination. This system permits an almost unlimited number of test lead configurations that is constantly expanding as new probe bodies and DUT (device under test) interfaces come to market.
The wire may be wrapped directly under the head of a screw, may be held by a metal plate forced against the wire by a screw, or may be held by what is, in effect, a set screw in the side of a metal tube. The wire may be directly stripped of insulation and inserted under the head of a screw or into the terminal. Otherwise, it may be either inserted first into a ferrule, which is then inserted into the terminal, or else attached to a connecting lug. which is then fixed under the screw head.
I HAVE MANY DIFFERENT TYPE OF CUTTER WHICH IS USE FOR DIFFERENT CUTTINGS.
An IC socket, or integrated circuit socket, is used in devices that contain an integrated circuit. An IC socket is used as a placeholder for IC chips and is used in order to allow safe removal and insertion of IC chips because IC chips may become damaged from heat due to soldering.
IGBT-insulated-gate bipolar transistor, It includes all types of Igbt / Mos-fect /Industrial Diodes
A circuit breaker is an automatically operated electrical switch designed to protect an electrical circuit from damage caused by overload or short circuit. Its basic function is to detect a fault condition and interrupt current flow. Unlike a fuse, which operates once and then must be replaced, a circuit breaker can be reset (either manually or automatically) to resume normal operation. Circuit breakers are made in varying sizes, from small devices that protect an individual household appliance up to large switchgear designed to protect high voltage circuits feeding an entire city.
A cable gland (in the U.S. more often known as a cable connector or fitting) is a device designed to attach and secure the end of a cable to the equipment. All Types of CABLE GLAND & TERMINAL BLOCK
Applications:
Electric Ovens Laboratory Ovens Microwave Ovens Electric Thermal Appliances Toasters Appliances/Instruments requiring inbuilt timing indication/control
Features:
High temperature resistance Rugged metal Gears and Metal Body 15 Amps high contact capacity High operating torque Attractive Knob and Dial
A DIP switch is a manual electric switch that is packaged with others in a group in a standard dual in-line package (DIP). The term may refer to each individual switch, or to the unit as a whole. This type of switch is designed to be used on a printed circuit board along with other electronic components and is commonly used to customize the behavior of an electronic device for specific situations.
A soldering iron is a hand tool used in soldering. It supplies heat to melt solder so that it can flow into the joint between two workpieces
A USB hub is a device that expands a single USB port into several so that there are more ports available to connect devices to a host system.
* HIGH BRIGHT. * ENERGY SAVING. * ELEGANT APPERANCE. * LONG LIFE. * ULTRA THIN. * ECO FRIENDLY. * SIMPLE AND QUICK INSTALLATION.
Floodlights are broad-beamed, high-intensity artificial lights. They are often used to illuminate outdoor playing fields while an outdoor sports event is being held during low-light conditions. More focused kinds are often used as a stage lighting instrument in live performances such as concerts and plays. In the top tiers of many professional sports, it is a requirement for stadiums to have floodlights to allow games to be scheduled outside daylight hours. Evening or night matches may suit spectators who have work or other commitment earlier in the day. The main motivation for this is television marketing, especially in sports such as Gridiron which rely on TV rights money to finance the sport. Some sports grounds which do not have permanent floodlights installed may make use of portable temporary ones instead. Many larger floodlights (see bottom picture) will have gantries for bulb changing and maintenance. These will usually be able to accommodate one or two engineers. The company having ex-stock in 10W, 20W, 30W, 50W, 70W, 100W.
These applications include temperature measurement, compensation, and control. NTC thermistor probes are generally used as resistance thermometers. They are extremely versatile and accurate, which makes them ideal for a wide variety of applications that measure temperature.
An uninterruptible power supply, also uninterruptible power source, UPS or battery/flywheel backup, is an electrical apparatus that provides emergency power to a load when the input power source, typically mains power, fails. A UPS differs from an auxiliary or emergency power system or standby generator in that it will provide near-instantaneous protection from input power interruptions, by supplying energy stored in batteries, supercapacitors, or flywheels. The on-battery runtime of most uninterruptible power sources is relatively short (only a few minutes) but sufficient to start a standby power source or properly shut down the protected equipment.
The proximity switch use for distance measuring by sensor. The proximity sensor come in PNP & NPN two types. we are offering good quality of proximity switch with good brand.
A cable tie, also known as a hose tie, zap-strap, or zip tie or tie-wrap, is a type of fastener, designed for bunching electric cables or wires and to organize cables and wires. Their instant, permanent bonds tie many other applications together, as diverse as garden plumbing and law enforcement. In its common form, the nylon cable tie consists of a tape section with triangular teeth that slope in one direction. The head of the cable tie has a slot with a flexible pawl that irreversibly rides up the slope of these teeth when the tape is inserted. The pawl engages the backside of these teeth to stop removal of the tape.
A rotary switch is a switch operated by rotation. These are often chosen when more than 2 positions are needed, such as a three-speed fan or a CB radio with multiple frequencies of reception or "channels".
Computer speakers, or multimedia speakers, are speakers external to a computer, that disable the lower fidelity built-in speaker. They often have a low-power internal amplifier. The standard audio connection is a 3.5 mm (approximately 1/8 inch) stereo phone connector often color-coded lime green (following the PC 99 standard) for computer sound cards. A few use a RCA connector for input. There are also USB speakers which are powered from the 5 volts at 500 milliamps provided by the USB port, allowing about 2.5 watts of output power.
*GENERAL DESCRIPTION The ORD213 is a small single-contact reed switch designed for general control of low-level loads less than 24 V. The reed contacts are sealed within the glass tube within inert gas to maintain contact reliability. FEATURES (1) Reed contacts are hermetically sealed within a glass tube with inert gas and do not receive any influence from the external atmospheric environment. (2) Quick response (3) The structure comprises the operating parts and electrical circuits arranged coaxially. Reed switches are suited to applications in radio frequency operation. (4) Reed switches are compact and light weight. (5) Superior corrosion resistance and wear resistance of the contacts assures stable switching operation and long life. (6) With a permanent magnet installed, reed switches economically and easily become proximity switches. APPLICATIONS: 1> Automotive electronic devices. 2> Control equipment. 3> Communication equipment. 4> Measurement equipment. 5> Household appliances.
The CFL LAMP called (compact fluorescent light, energy-saving light). A new generation light. There is many different type of CLF LIGHT available in markets. The CLF light take low voltage consuming and give more brightness.
A memory card or flash card is an electronic flash memory data storage device used for storing digital information. They are commonly used in many electronic devices, including digital cameras, mobile phones, laptop computers, MP3 players and video game consoles. Most of these can be diminutive, re-recordable, and can retain data without power.
All kind of register like( MFR-REGISTER, CFR-REGISTER, MOR-REGISTER, ALUMINUM HEAT SINK WITH REGISTER, SMD REGISTER) we are having good quality of product.
Emergency vehicle lighting is visual warning lights fitted to a vehicle for use when the driver wishes to convey to other road users the urgency of their journey, to provide additional warning of a hazard when stationary, or in the case of law enforcement as a means of signalling another driver to stop for interaction with an officer.
Industrial and multiphase plugs and sockets provide a connection to the electrical mains rated at higher voltages and currents than household plugs and sockets. They are generally used in polyphase systems, with high currents, or when protection from environmental hazards is required. Industrial outlets may have weatherproof covers, waterproofing sleeves, or may be interlocked with a switch to prevent accidental disconnection of an energized plug. Some types of connectors are approved for hazardous areas such as coal mines or petrochemical plants, where flammable gas may be present.
All Types of LIGHTS 1.CFL 2.Street LIGHTS 3.LED LIGHTS An electric light is a device that produces light by the flow of electric current. It is the most common form of artificial lighting and is essential to modern society, providing interior lighting for buildings and exterior light for evening and nighttime activities. Most electric lighting is powered by centrally generated electric power, but lighting may also be powered by mobile or standby electric generators or battery systems. Battery-powered lights, usually called "flashlights" or "torches", are used for portability and as backups when the main lights fail. The two main families of electric light are incandescent lamps, which produce light by a filament heated white-hot by electric current, and gas-discharge lamps, which produce light by an electric arc through a gas. The energy efficiency of electric lighting has increased radically since the first demonstration of arc lamps and the incandescent light bulb of the 19th century. Modern electric light sources come in a profusion of types and sizes adapted to a myriad of applications.
Closed-circuit television (CCTV) cameras can produce images or recordings for surveillance. The purposes, and can be either video cameras, or digital stills cameras. Marie Van Brittan Brown was the inventor of the CCTV camera.
The soldering iron use in soldering of electronics components. The soldering iron come in different brand in different quality. I am always offer good quality of solder iron to my client.
A switched-mode power supply (switching-mode power supply, SMPS, or switcher) is an electronic power supply that incorporates a switching regulator to convert electrical power efficiently. Like other power supplies, an SMPS transfers power from a source, like mains power, to a load, such as a personal computer, while converting voltage and current characteristics.
Let your feet control the power and free up your hands to focus on work. Plug this foot switch into a grounded outlet then plug your router, saw, drill press or lathe into the foot switch. Momentary snap-action design means that you press down with your foot to turn it on and then simply remove your foot to turn the foot switch off.
Transistors are active components and are found everywhere in electronic circuits. They are used as amplifiers and switching devices. As amplifiers, they are used in high and low frequency stages, oscillators, modulators, detectors and in any circuit needing to perform a function. In digital circuits they are used as switches.
A capacitor (originally known as a condenser) is a passive two-terminal electrical component used to store energy electrostatically in an electric field. The forms of practical capacitors vary widely, but all contain at least two electrical conductors (plates) separated by a dielectric (i.e., insulator). The conductors can be thin films of metal, aluminum foil or disks, etc. The 'nonconducting' dielectric acts to increase the capacitor's charge capacity. A dielectric can be glass, ceramic, plastic film, air, paper, mica, etc. Capacitors are widely used as parts of electrical circuits in many common electrical devices. Unlike a resistor, a capacitor does not dissipate energy. Instead, a capacitor stores energy in the form of an electrostatic field between its plates. It includes all kinds of capacitors (Ac & Dc) for multi use.
The cooling fan use for exit heating of machinery. We have different make in different side.
A trademark for a waxy, opaque material, polytetrafluoroethylene, employed as a coating on cooking utensils and in industrial applications to prevent sticking. The Teflon wire in any kind of measurement we can provide best quality of teflon wire.
The fuse holder use to come power supply passing with fuse in different size and different amp. As per Fuse size you can use the fuse holder. I have Good standard with heavy quality material of fuse holder for real user.
The CRIMPING PIN use for CPU CONNECTER connect with wire by crimping tool and pass the power supply from point A to point B.
In electronics, desoldering is the removal of solder and components from a circuit board for troubleshooting, repair, replacement, and salvage.The de-soldeing pump used de-soldering of electronics components & solder wires.
The term "DB9" refers to a common connector type, one of the D-Subminiature or D-Sub types of connectors. DB9 has the smallest "footprint" of the D-Subminiature connectors, and houses 9 pins (for the male connector) or 9 holes (for the female connector). DB9 connectors were once very common on PCs and servers. DB9 connectors are designed to work with the EIA/TIA 232 serial interface standard, which determined the function of all nine pins as a standard, so that multiple companies could design them into their products. DB9 connectors were commonly used for serial peripheral devices like keyboards, mice, joysticks, etc. Also they are used on DB9 cable assemblies for data connectivity. Today, the DB9 has mostly been replaced by more modern interfaces such as USB, PS/2, Firewire, and others. However, there are still many legacy devices that use the DB9 interface for serial communication.
A multimeter or a multitester, also known as a VOM (Volt-Ohm meter), is an electronic measuring instrument that combines several measurement functions in one unit. A typical multimeter would include basic features such as the ability to measure voltage, current, and resistance. Analog multimeters use a microammeter whose pointer moves over a scale calibrated for all the different measurements that can be made. Digital multimeters (DMM, DVOM) display the measured value in numerals, and may also display a bar of a length proportional to the quantity being measured. The multimeter having ex-stock in different make with different model.
