Other Products / Services #5469825

TIGMIGSAW 120 : Cr-Ni austenitic filler rod with controlled ferrite content for TIG weldingTIGMIG 120 H : Fully austenitic stainless steel filler rodTIGMIGSAW 120 S : Austenitic, columbium-stabilized, stainless steel filler rodTIGMIG 120 Si : Fully austenitic stainless steel filler rodTIGMIG 120 S Si : Austenitic, columbium-stabilized, stainless steel filler rodTIGMIGSAW 121 : Austenitic Cr-Ni-Mo stainless steel filler rod for TIG MIG weldingTIG 121 LF SPL : Fully austenitic Cr-Ni-Mo alloyed stainless steel filler rod for TIG MIG welding of AISI 316 L and 316 grades of stainless steels

Size/Range: 50x25 x 5 to 150 x 100 x 12 Thickness: 3 to 12mm. Specification: ASTM A276, A484

Standard : ASTM A276, A484Condition: HRAPSize Range: Base: 80 to 150 mm Side: 40 to 75 mmThickness: 3 to 6 mm (depending on size)Width (mm): 20, 25, 30, 32, 40, 50, 65, 75, 90, 100Thickness: 5mm to 32mmGrades: 304, 304L, 316, 316L, 202

We are manufacturing and exporting pipe fittings along with seamless tubes, seamless titanium tubes and molded seamless tubes. Apart from this, we are also supplier and dealer of a wide range of ferrous & non - ferrous metal products.

Product Range: The following table represents size range, product standards and material grades of Sheet, Plates & Coils

Pipe FittingsCustomized as per the specifications of our clients, our range of Pipe Fitting (But weld Fitting, Elbow, Tee, Reducer) is in wide demand across the market. All the products are manufactured using superior quality ferrous and non ferrous metals and have following specifications:

SizeRange: 20 x 20, 25 x 25, 30 x 30, 40 x 40, 50 x 50, 65 x 65, 75 x 75, 100 x 100Thickness: 3 to 12mm.Specification: ASTM A276, A484SizeRange: 50x25 x 5 to 150 x 100 x 12Thickness: 3 to 12mm.Specification: ASTM A276, A484

• T-304 is standard stainless Fine, Medium, Coarse

• T-316 is premium stainless Fine, Medium, Coarse

• Stainless Welded Mesh

• Stainless Hex Mesh

• Micronic Mesh

• Use bolting cloth for sifting

• Stainless Steel Filter Discs

• Very widely used, most popular type of metal mesh

• Used from outer space to underwater and everywhere in between

Stainless steel shims, SizeRange: 12 MM to 100 MMThickness: 0. 3 to 8 MMGrades Available: ASTM 240 ASME SA 240 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316H, 316L, 316 TI, 317, 317L,

TIGMIGSAW 120 : Cr-Ni austenitic filler rod with controlled ferrite content for TIG weldingTIGMIG 120 H : Fully austenitic stainless steel filler rodTIGMIGSAW 120 S : Austenitic, columbium-stabilized, stainless steel filler rodTIGMIG 120 Si : Fully austenitic stainless steel filler rodTIGMIG 120 S Si : Austenitic, columbium-stabilized, stainless steel filler rodTIGMIGSAW 121 : Austenitic Cr-Ni-Mo stainless steel filler rod for TIG MIG weldingTIG 121 LF SPL : Fully austenitic Cr-Ni-Mo alloyed stainless steel filler rod for TIG MIG welding of AISI 316 L and 316 grades of stainless steels

• TIG/MIG/SAW 120 : Cr-Ni austenitic filler rod with controlled ferrite content for TIG welding
• TIG/MIG 120 H : Fully austenitic stainless steel filler rod
• TIG/MIG/SAW 120 S : Austenitic, columbium-stabilized, stainless steel filler rod
• TIG/MIG 120 Si : Fully austenitic stainless steel filler rod
• TIG/MIG 120 S Si : Austenitic, columbium-stabilized, stainless steel filler rod
• TIG/MIG/SAW 121 : Austenitic Cr-Ni-Mo stainless steel filler rod for TIG / MIG welding
• TIG 121 LF SPL : Fully austenitic Cr-Ni-Mo alloyed stainless steel filler rod for TIG / MIG welding of AISI 316 L and 316 grades of stainless steels
• TIG/MIG/SAW 122 Fully austenitic chromium-nickel steel filler rod for TIG welding
• TIG/MIG/SAW 123 : Austenitic stainless steel filler rod
• TIG/MIG 123 LMo : Austenitic stainless steel solid wire for welding of dissimilar metals
• TIG/MIG 124 : Fully austenitic stainless steel filler rod
• TIG/MIG 125 : Solid duplex stainless wire for welding 2205 type duplex stainless steels
• TIG/MIG 126 : Austenitic Cr-Ni-Mo stainless steel filler rod for TIG/MIG welding
• TIG/MIG 127 : TIG welding of 13% Cr stainless steels
• TIG/MIG 128 : Ferritic chromium steel filler rod for TIG/MIG/SAW welding
• TIG/MIG/SAW 129 :Filler rod for MIG, TIG, plasma-arc and submerged-arc welding
• TIG/MIG 130 : Austenitic-ferritic Cr-Ni-Mn steel filler rod for TIG 131 Austenitic-ferritic Cr-Ni-Mn steel filler rod for TIG/MIG welding
• TIG/MIG 132 : Chromium alloy with ferritic microstructure
• TIG/MIG 133 : Austenitic stainless steel wires with manganese for MIG welding
• TIG/MIG 135 : Flux cored wire for welding of AISI 409 ferrite stainless steels

Supply condition: Soft Annealed (Matt/ Bright) 1/4 hard, 1/2 hard, full hard Spring hard EPQ Size range: 0.6 mm to 16.0 mm Coil weight:10 kg to 650 kg Packing:Coils with/without metal carriers Core packing with palletDrum packsCheese wound/Euro CoilsSpools

Grandness: 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316H, 316L

Size:

• 0. 02 MM thickness x SS 316 Shim
• 0. 03 MM thickness x SS 316 Shim
• 0. 04 MM thickness x SS 316 Shim
• 0. 05 MM thickness x SS 316 Shim
• 0. 06 MM thickness x SS 316 Shim
• 0.07 MM thickness x Ss 316 Shim
• 0. 15 MM thickness SS 316 Shim
• 0. 20 MM thickness x SS 316 Shim
• 0. 25 MM thickness x SS 316 Shim
• 0. 30 MM thickness x SS 316 Shim
• 0. 35 MM thickness x SS 316 Shim
• 0. 40 MM thickness x SS 316 Shim

SizeRange: 20 x 20, 25 x 25, 30 x 30, 40 x 40, 50 x 50, 65 x 65, 75 x 75, 100 x 100Thickness: 3 to 12mm.Specification: ASTM A276, A484SizeRange: 50x25 x 5 to 150 x 100 x 12Thickness: 3 to 12mm.Specification: ASTM A276, A484

Size/Range: 1250x2500, 1500x3000, 1250x6000, 1500x6000, 2000x4000, 2000x6000 Thickness: 4.0mm to 100mm Specification: ASTM A 240/480 finished No.1 hot rolled annealed and pickled finished 2B in some sizes

Size/Range: 1000mm, 1250mm, 1500mm, 2000mm. Thickness: 0.5 to 8 mm Specification: ASTM A240/A480 Finished: No.1, No.2, No.2B, BA, No.3, No.4, No.8, Scotch Brite, Mirror, PVC & Non PVC.

Size/Range: 1250x2500, 1500x3000 Thickness: 3mm to 6mm Specification: ASTM A-240, ASME SA-240

Size/Range: 20 x 20, 25 x 25, 30 x 30, 40 x 40, 50 x 50, 65 x 65, 75 x 75, 100 x 100 Thickness: 3 to 12mm. Specification: ASTM A276, A484

Stainless grades: 304 - 304L - 316L Length: 20" to 22" Random lengthI-Beams are inventoried in 304/304L and 316/316L. Beams are primarily rolled or extruded up to 6 height x 3.332 flange with web thickness up to .232.Larger beams in excess of 6 can be manufactured utilizing laser fusion technology, which also enables engineers and metal buyers to mix thickness or even material grades. Laser fused beams can also be supplied in Duplex 2205 and lean Duplex 2101

Size/Range: 4", 5", 8" as per requirement Thickness: 0.5 to 100mm Specification: ASTM 240

Grades : E308LT1-1, E316LT1-1, E309LT1-1, E347T1-1. E-309LMoT1-1, E-2209T1-1

We offer a complete range of high tensile fasteners that are made as per the standard dimensions and international quality standards. These fasteners are widely applied in engineering, construction industry etc.

SizeRange: 20 x 20, 25 x 25, 30 x 30, 40 x 40, 50 x 50, 65 x 65, 75 x 75, 100 x 100Thickness: 3 to 12mm.Specification: ASTM A276, A484 izeRange: 50x25 x 5 to 150 x 100 x 12Thickness: 3 to 12mm.Specification: ASTM A276, A484

SizeRange: 20 x 20, 25 x 25, 30 x 30, 40 x 40, 50 x 50, 65 x 65, 75 x 75, 100 x 100Thickness: 3 to 12mm.Specification: ASTM A276, A484SizeRange: 50x25 x 5 to 150 x 100 x 12Thickness: 3 to 12mm.Specification: ASTM A276, A484

Austenitic: AISI 303, AISI304 / 304L, AISI310, AISI316 / 316L, AISI321, AISI347 Martensitic (ss): AISI431, AISI410, AISI420, AISI 416 F series: F1, F5, F9, F11, F22 etc. Super Duplex Steel: Uns 32205 / F-51 Hot Die Steel: H-10, H-11, H-12, H-13 Age Hard enable Steel: 17-4PH, 15-5 PH