Chennai, Tamil Nadu, India GST : 33AAAFM4453D1ZS Verified Supplier
We are leaders in the market for providing best range of Lancom 4 Data Acquisition & Analysis Software, Lancom Portable Gas Analyser Sample Probes, Coal Pile Hotspot Detection, 5E-HGT2320 Automatic Mercury Analyser and 5E-MAG6700 Automatic Proximate Analyzer
Insight is a Windows™ based data acquisition software program, used for logging stack emissions measurement data directly from a LANCOM portable gas analyzer. Emissions data can be analyzed either as it is collected in real time, or during review of logged data. A range of statistical and graphical tools allow the user to perform measurements, manipulate, report, present and print data.
The Lancom range of Portable Flue Gas Analysers features gas sample probes for varying applications. In applications where a standard probe is not suitable, or there is a special measurement requirement – select one of these alternative probes.
Storing coal in large piles has the inherent risk of spontaneous combustion. There are many industry guidelines to the best method for storing coal in piles. These guidelines include avoidance of spontaneous combustion with regard to pile angles, compression and surface smoothing. Even strict adherence to these guidelines (particularly with the more volatile coals) may in some circumstances not be enough. An early warning system to prevent the onset of fire remains the best and most reliable solution.
5e-mag6700 automatic proximate analyzer（also called thermogravimetric analyzer, tga）is used to determine the moisture, ash, volatile matter in coal, coke, biomass, limestone and iron ore, food and feedstuffs by thermogravimetric method. It can also determine residual ash and slag combustibles in accordance with astm, which is widely applied in power plants, coal mines, metallurgy, food industry, chemical industry, commercial inspection, scientific research, education, etc. It could work both simultaneously and independently.
5E-MACIV Automatic Proximate Analyzer (thermo gravimetric analyzer, short for TGA) is used to determine the moisture, ash, volatile matter and fixed carbon in coal and coke. It can also determine residual ash and slag combustibles in accordance with ASTM, which is widely applied in power plant, coal mine, metallurgy, chemical industry, commercial inspection, scientific research, education, etc. (The result for Volatile Matter is just for reference).
5E-MVC6700 Automatic Volatile Matter Analyzer (thermo gravimetric analyzer, short for TGA) is used to determine volatile matter in coal and coke. It can also determine residual ash and slag combustibles in accordance with ASTM, which is widely applied in power plant, coal mine, metallurgy, chemical industry, commercial inspection, scientific research, education, etc.
5E-AF4000 Ash Fusibility Determinator is used to determine ash cone deformation temperatures in coal ash, coke ash, biomass ash and mold powders automatically, which are critical to the boiler functioning properly and to avoid slagging and fouling.
5E-AF4105 Ash Fusibility Determinator is used to determine ash cone deformation temperatures in coal ash , biomass ash and mold powders automatically, which are critical to the boiler functioning properly and to avoid slagging and fouling.
5E-PL300B Automatic Plastometric Indices Determinator (aslo called Spozhnikov Plastometer) is used to determine the plastometric indices of bituminous coal (maximum thickness of plastic layer Y, final contraction value of plastic layer X) and describe technical characteristics of coke, which helps to guide coking and coal blending. It is widely applied in coal mining, metallurgy, chemical industry and verification institution of coal quality.
5E-PL360 Automatic Coal Cup Cleaner is specially used to clean the coke breeze inside of coal cup after the plastometric indices testing. Free adjustment of impeller rotating speed and cleaning times. Clean coal cup back and forth continuously to ensure full cleaning. Safely operation with sensitive switch, power-off when loading the coal cup. Equipped with position detection and resetting when switched on. Vacuum cleaner connection availabe.
5E-APS Fully Automatic Sample Preparation System is designed to produce specified coal samples automatically with unattended operation, which applies to coal sample preparation in power plants, coal mines, chemical industry, metallurgy, construction material, geography, environmental protection, scientific research, etc.
5E-SSB200 Sieving Shaker is used for grade sieving of particulate materials, which is widely applied in power plants, coal mines, chemical industry, metallurgy, foodstuff and geology. Effectively reduce dust leakage with dust cover. Available to store three modes. Easy installation of sample sieve, easy to clean and no sample mixing.
The PPA500 joins Newtons4th’s Precision Power Analyzer range addressing a need for high performance power analysis at low cost. Primarily aimed toward applications that require precision measurement without complex features, the PPA500 series is ideally suited to a production or test environment. The unit benefits from a full colour TFT display that provides greater flexibility than fixed numeric displays and combines a level of performance, ease of use and value beyond any comparable product.
The N4A range of Programmable AC+DC Power Sources provide breakthrough low distortion performance previously unseen from a â��Switched Topologyâ�� Source, the implementation of a proprietary â��6 legged output stageâ�� effectively creates a very high switching frequency for waveform construction â�� thus providing lower distortion. The N4A offers the unique ability to generate both high frequency power waveforms up to 1kHz as well as low frequency power waveforms down to 0.01Hz. This feature enables the engineer to simulate low frequency power devices such as wind turbines with very low fundamental frequencies. Up until now, switching topologies have suffered from higher distortion levels than that of the more established Linear approach. The introduction of the N4A power sources signifies a new chapter in low distortion AC Power Source technology.
Light-915 mercury analyzer is a compact instrument designed to address the problems of mercury pollution in a workplace environment and sanitary control. As with all the other lumex mercury analyzers, the principle of measurement of light-915 is based on atomic absorption spectrometry with zeeman background correction, which eliminates the effect of interfering impurities. It is the only instrument with high sensitivity and selectivity that enables direct real-time measurements (with response time 1 second). Built-in performance verification test cell and automatic zero check procedure makes operation of light-915 really simple. The instrument is compact, weighs just 3, 3 kg, and provides full capabilities for field monitoring, i.e. 12 h battery operation, telescopic probe, datalogger, bluetooth interface for remote control and data transfer.
Our new FT mid-IR spectrometer InfraLUM FT-08 has been designed basing on our extensive R&D and expertise in the IR spectroscopy (infrared spectroscopy). This multipurpose and easy-to-operate instrument provides a well suited option for various analytical laboratories. The high-quality misalignment-proof optics, high-resolution DTGS, and a wide variety of accessories ensure the users’ absolute confidence in the high accuracy of the measurement data and make it an ideal tool for routine measurements at low inventory investment and running costs.
Rapid analysis of grain quality parameters (determination of protein, moisture, gluten content, vitreousness and other parameters of wheat). Determination of oil content, protein and other quality parameters of interest in cereal grains and oilseeds, and processed products. Analysis results are obtained within 1.5 minutes, no reagents required.
CKAT-1 analyzer is designed for continuous automatic monitoring of content of suspended particles and petroleum products in water samples (turbidity measurements) and for monitoring of water color. Analyzer performs automatic monitoring of water stream for technological processes of water treatment, power generation industry, for environmental monitoring. The analyzer does not consume any chemicals during measurement. The analyzer may be incorporated in a complex control system of water treatment process.
The Transducer Display ETD is a readout suitable for all RWT transducers. Although it is primarily used to display torque and peak torque, it can also display speed and power, provide access to the analog outputs from the transducer and connect the transducer to a PC for use with TorqView and the Transducer Control Program.
TorqView is an easy to use advanced torque monitoring software application available to operate in conjunction with the RWT420 and RWT440 Series Transducers and any of the E102, E202 and E302 series Transducer Display Interfaces to provide a flexible display, real time plotting and data recording facility.
The wireless receiver is used in conjunction with the wireless Load Sensor. It provides the user with an easy way to receive and output data from the Load Sensor. Enclosed in a hardwearing aluminium box the receiver is suitable to be installed into environments where it may be subjected to harsh conditions. The receiver is easy to install as it only requires DC power to be supplied to the unit. An SMA connector allows the use of an external antenna. The wireless LoadSense HandHeld Receiver Display is used in conjunction with the wireless Load Sensor. It provides the user with an easy way to receive and view data from the Load Sensor. Up to 9 Load Sensors can be selected from the HandHeld Receiver and individually displayed. These Load Sensors can be named by plugging the Load Sensor into a PC via USB and using the Load Sensor software. They can then be easily distinguished on the display, which will show the current name of the Load Sensor being read.
The LoadSense Cabin Display is a small, lightweight, cabin window mounted unit which is used in conjunction with our LoadSense Wireless Load Sensors to display the reading from the load sensor. Our range of Load Sensors up to 25 tonnes are shown in datasheet WLS3625R. Using the 2.4GHz licence free band to receive the Load Sensor signal, it can display the load value in several views which are user selectable. It also allows the user to tare off any equipment weight to display just the load value of the cargo.
The wireless receiver is used in conjunction with the wireless Load Sensor. It provides the user with an easy way to receive and output data from the Load Sensor. Enclosed in a hardwearing aluminium box the receiver is suitable to be installed into environments where it may be subjected to harsh conditions. The receiver is easy to install as it only requires DC power to be supplied to the unit. An SMA connector allows the use of an external antenna.
Tecora offers a wide range of isokinetic probes, integrated and dividable, plus a wide range of accessories to perform different kinds of samplings (manual, isokinetic, micropollutants, acids, etc), in accordance with EN and USEPA norms.
EASY GAS is equipped with a large silica gel trap and a protective filter. This solution allows you to avoid pump damage from aggressive stack gases or simply from accidental suction of adsorbing solution. EASY GAS is supplied with a battery chargerpower supply and can also be used from the mains.
The DDSEG probe is equipped with a heated filter holder and a heated dilution chamber. Only stainless steel parts are in contact with gas. Sampling tubes are available in different shapes and lengths, according to standard sampling methods. The probe is supplied with a carrying case containing a 220110-12 V power supply and a battery that allows it to work even if there is no power.
Bravo Basic is the economic portable constant flow rate sampler suitable for dust and gas sampling either in stack or in ambient. It is equipped with an LCD-type week-based timer, allowing you to turn the pump on and off. The digital thermometer shows the measured temperature of the gas at the dry gas meter. The sampled flow rate is set and read through two rotameters.
Flowcal Air allows you to perform all the necessary controls to verify the calibration of certain parameters which are normally measured by a sampler, like flowrate, pressure and temperature. This characteristic makes Flowcal Air unique for testing the accuracy of an instrument and following a quality system procedure.
The world's most accurate hot-wire anemometer with a 2% accuracy - a research-grade multi-function instrument with detachable compatible probes. Probe Compatibility feature allows you to have spare probes. Detachable probe. Automatic Flow Rate Calculation function. Large data storage, stores up to 20, 000 measurements. Differential Pressure available as an option.
Economical palm-size and feather-weight standard hot-wire anemometer; easy one button operation; probe is replaceable in the field without the need to recalibrate.Temperature compensation circuit for high accuracy. Display readings in both metric and imperial units
High velocity (up to 50 ms), multi-function hot-wire Anemometer; the 6113 includes a built-in printer. Probe Compatibility feature allows utilization of a spare probe. Simultaneously measures of air velocity, temperature, and pressure measurements. Large, easy-to-read LCD
The Series 200 monitor is a cost-effective portable monitor that can be used to accurately measure a range of gases at different concentrations. It is an entry level air quality testing device designed for spot checking outdoor air pollutants, for personal exposure monitoring or for education purposes. The display can be configured to show the real-time gas concentrations or to display the minimum, maximum and average readings.