Marvel Products

Mahim, Mumbai, Maharashtra

Antistatic Bags are made of flexible polythelene material rendered antistatic by the use of special anti static agents. The surface resistivity is maintained below 1010 ohms per square. These bags are made from tubes of standard widths. The standard thickness of the bag is 0.1mm (100microns). Bags can be easily heat sealed to protect the contents within. Each bag carries a standard caution message. Additional user messages, monograms can be printed on request.

This product has an inner layer made of soft conductive rubber which ensures 100% efficient conductive contact with the skin of the user. The hook and the loop fasteners facilitate adjustment to the size of the wrist while maintaining comfort for working long hours. This wrist strap is very rugged in construction. A coiled ground is provided with each wrist strap. The cord carries 1 megaohm resistor in series, moulded into the snap female connectors. Various end connectors are offered to suit requirements

The elastic band is made of polyester and woven stainless steel/nickel fibers on interior surface. Each unit comes with a 2m coil grounding cord with a built-in one mega ohm resistor for safety.

Knitted Glove with ESD Version made with very appropriate material which has anti-static electricity.ESD PU Palm Coated is Polyurethane coated on palm; ESD PU Fingertips Coated is Polyurethane coated on end fingers of gloves.Highly flexible for dexterity, ergonomic fit, and open knit back allows air-flow to hand.Good elasticity, ventilation and durability as well as excellent resistance against wearing out, water, and slipping by sweat.Light weight and reusable.

Conductive sole footwear are very effective for mobile personnel. A constant ground path is maintained at all levels of humidity. Made from Conductive Expanded PU, High Aesthetic Value combined

Antistatic shoes have the characters of handiness, ventilation and wear comfortably, also environmental Conservation its upper made by genuine Leather and the middle sole have deodorant, anti-mustiness, anti-bacterium, ventilate, sweat-absorbing function.SPECIFICATION:Upper cover material PVC/PU/leather/canvas/ ESD FabricsOutsole Material PVC/PU/EVAElectric Resistance(Ohms) 10^710^Style Requirement Booties/shoes/slippers

Antistatic sole footwear are very effective for mobile personnel. A constant ground path is maintained at all levels of humidity.The surface resistivity of Antistatic Slip-ons is in the range of 108-109

Electro dissipating time:0.1s 2.Acurrent liiting 1MresisterFits all shones, durable, long life. 4.Permanent conductive properties.RecommendPuton both feet for use on anti-static flooring. Be carefui when removing strap to avoid damage

These bags offer extra protection to delicate electronic components from impact and shock in addition to protection from ESD. These bags are available in any non-standard sizes. Also available are box shaped bags and sheets of 1.5 M width.

Static Shielding Bags provide complete protection from electrostatic discharges. The material is constructed out of Polyester, Vacuum Deposited Aluminum and Polythene, coated with Static Dissipative Lacquer on both sides. The material is high on Optical Clarity and low on ionic contamination.

The use of Antistatic Conductive Fibre brush eliminates Static Electricity by grounding the charges generated in Textile Machinery, Paper Processing and Printing Machinery and Pharmaceutical machinery. The Brush is fitted on the machine to allow the soft conductive fibres to touch or be in close proximity of the material on which the static charges are being generated. The Static Charges are picked up by the fibre and are conducted to the metal holder of the brush which in turn grounds them through the Earthing of the machine. The Brushes are available in standard lengths of 250, 300, 350mm combinations of which are adaptable to most machines.

The generation and accumulation of unwanted electrostatic charges especially on moving surfaces, poses a serious problem in various industries and processes. For example, static charges can lead to sticking and crumpling of polyester films while being processed on the machines. Collection of dust and other particulate contaminants on surfaces due to static is another example.These shock-less static discharge bars are designed for elimination of electrostatic charge on moving surfaces. The bar is powered by a high voltage power source. The design is compact, yet rugged and is a very effective static eliminating tool for most industrial applications.These AC static eliminating bars generate ions of both polarities, thereby ensuring effective static elimination of positive and negative charges from moving surfaces. Features barShockless and hence no chance of hazard even if electrode is touchedElectrodes protected from short circuit; no damage even if accidentally earthedGood discharge range 10 40 mmRugged and reliableEasy installation and start-upNo maintenance, except for periodic cleaningStandard 2 meters HV interconnecting cableOptional: Adjustable mounting bracket

Conductive Bins offer complete safety for sensistive components while being stored or carried in-house. The surface resistance of these bins is less than 106.StackableHeavy Duty Re-inforced base and stacking rimSlot for identification card holdersEasy access to contents

Conductive Boxes provide protection to sensitive Components from electrostatic discharges while being stored or transported. Surface Resistivity of the material is less than 106 ohms/sq.

Conductive Tool Boxes are ideal for visiting engineers. The Surface resistivity of the boxes is in the conductive range i.e. < 106 ohms/sq. The tool box can be used to carry tools and is safe enough to be placed in Static sensitive environments.

Conductive Trays with risers help to organise items in a static safe area. Tools, Components, Documents can be stored easily while providing sensitive components safety from electrostatic discharges.

Economical racks for handling clinched SMDs, Soldered or bare boards of any Size. Tapered slots to keep PCBs in taper position.and Easy to carry.

Conductive Component Organiser provides systematic storage of electrostatic sensitive devices. It consists of a cabinet with 25 small drawers.Size of Cabinet: 400mm x 250mm x 160mmSize of the Drawers: 150mm x 75mm x 35mm

This instrument is designed to measure the Static Voltages carried on a human body. It is a good auditing tool to verify whether Personnel entering an ESD safe area are carrying any hazardous charges on themselves. It can also serve to verify whether all the ESD protection measures which have been taken to make a particular area ESD safe are effective. By such measures we mean conductive flooring, antistatic table mats, wrist straps, static sheilding bags, ionizing equipment, conductive containers and bins etc.It is very simple to use and only requires the personnel under test to touch the Button on the instrument and directly read the charge level in volts on the meter.

This is an ultra wide-range, battery operated, Potable instrument for measuring surface Resistivity of virtually any flat surface. In the circuit industry, products such As packing materials, component storage Bags and trays, work bench surfaces, table and floor mats, conveyor belts, etc., have Resistance value, which need to confirm to Stringent specifications. Moreover, these Values are expected to fall within specified limit. The surface Resistivity meter can play a vital Role in monitoring and checking the Resistivity Characteristic of the above items. It also has unique additionalfeatures of surfaceto-ground measurement capability Wherein the Resistivity differential between any Surface and any chosen ground can be determined. The surface Resistivity is conveniently indicated by a row of LEDs covering a total of 10 decades from 10E3 to 10E13 ohms/sq.SPECIFICATIONS:Measurement Range : 10E3 to 10E13 ohms & ohms/sqMeasurement Accuracy : Half decadeResolution : One decadeIndication : Visual by different color LEDsPower supply : 9 Volt BatteryLow battery : Warning at 7.5 VDimensions : 135 x 70 x30 mmWeight : 160 GMS (With Battery)Calibration : Recommended every 12 monthsWarranty : 12 Months

Wrist strap is the first line of defence against electrostatic charges builds up on the human body. it is designed to carry away this charge as soon as it is generated. At the same time wrist strap must remain electrically safe for the user. Thus, it is important to test every wrist strap regularly. In order to protect the sensitive electronic components the maximum wrist strap resistance should not be more than 10 Meg ohms on the other end, the resistance should not be less than 0.75 Meg ohms as protection to the wearer from dangerous level of the voltage and current flow. The wrist strap tester checks these parameters under actual operating conditions with the strap on the wrist. It clearly indicates weather or not the resistance of the wrist strap system including the wearer is at least 0.75 Meg ohms and not more than 10 Meg ohms respectively.SPECIFICATIONS:Range : Wrist strap 0.75 to 10 Meg ohmIndications : Pass GREEN LEDLOW & High fail RED LED With Audible alarmTest actuation : By gently pressing metal sensor plateAccuracy : +/- 10%Power supply : 9 Volt BatteryLow battery : Warning at 7.0 VDimensions : 135 x 70 x 30 mmWeight : App. 150Gms with batteryCalibration : Recommended every 12 monthsWarranty : 12 MonthsOptional : Instruction Board, Carry Case & Door Locking System.

Foot wear is the first line of defence against electrostatic charges builds up on the human body. It is designed to carry away this charge as soon as it is generated. At the same time Foot wear must remain electrically safe for the user. Thus, it is important to test every Foot wears regularly. In order to protect the sensitive electronic components the maximum Foot wear resistance should not be more than 100 Meg ohms on the other end, the resistance should not be less than 0.75 Meg ohms as protection to the wearer from dangerous level of the voltage and current flow. The Foot wear tester checks these parameters under actual operating conditions with the Foot wears. It clearly indicates weather or not the resistance of the Foot wears system including the wearer is at least 0.75 Meg ohms and not more than 100 Meg ohms respectively.SPECIFICATIONS:Range : Foot Wear 0.75 to 100 Meg ohmsIndications : Pass GREEN LEDLOW & High fail RED LED With Audible alarmTest actuation : By gently pressing metal sensor plateAccuracy : +/- 10%Power supply : 9 Volt BatteryLow battery : Warning at 7.0 VDimensions : 135 x 70 x 30 mmWeight : App. 150Gms with batteryCalibration : Recommended every 12 monthsWarranty : 12 MonthsOptional : Instruction Board, Foot Plate, Carry Case & Door locking System.

Wrist Strap & ESD foot wears are the first line of defence against electrostatic charges build up on the human body.They are designed to carry away this charge as soon as it is generated. At the same time wrist strap/foot wear must remain electrically safe for the user. Thus, it is important to test every wrist strap / footwear regularly. In order to protect the sensitive electronic components the maximum wrist strap resistance should not more than 10 Meg ohms and foot wears resistance should not more than 100 Meg ohms. On the other end, the resistance should not be less than 0.75 Meg ohms as protection to the wearer from dangerous level of the voltage and current flow. The wrist strap and the footwear tester checks these parameters under actual operating conditions with the strap on the wrist or foot wear to the foot. It clearly indicates weather or not the resistance of the wrist strap/foot wear system including the wearer is at least 0.75 Meg ohms and not more than 10/100 Meg ohms respectively.SPECIFICATIONS:Range : Wrist strap 0.75 to 10 Meg ohmsFoot Wear 0.75 to 100 Meg ohmsRange Selection : By slide switchIndications : Pass GREEN LEDLOW & High fail RED LED (With Alarm)Test actuation : By gently pressing metal sensor plateAccuracy : +/- 10%Power supply : 9 Volt BatteryLow battery : Warning at 7.0 VDimensions : 135 x 70 x 30 mmWeight : App. 150Gms with battery

The Static Alarm senses changes in electrostatic fields. The static alarm is ideal for scanning the electrostatic field in critical areas of production and testing of electronic circuit, plastic and textile industries.SPECIFICATIONS:Detection method : charge coupling by field InterceptionDetection sensitivity : +/- >100VRange selection : Auto ranging and auto resettingIndication : Prominent for LED visual Indication with Audible alarmPower supply : 9V BatteryDimensions : 135 x 70 x 30mmWeight : Approximately 135G (with battery)NOTE: The specifications mentioned in this datasheet are subject to change without prior notice due to our continuous program of product development. Buyer or User shall be responsible for deciding the suitability.

Reliable on-the-spot measurement of static charges has been easier than with the portable SCM-01. Hand-held, yet highly accurate and low drift, the MPSCM-02 answers three basic questions:Is static present and on what Surfaces, Materials or people ?How much static?What is the polarity of the Charge ?The instrument is ideal for use in such static sensitive environment as electronic component production and assembly areas, clean rooms, computer, medical and R&D Laboratories, surgical rooms, medical device manufacturer, printing pres, packing and production lines, etc.SPECIFICATIONS:Measurement Range : +/- 10kV At 1 InchMeasurement Accuracy : +/- 10%Indication : 2 Digit LCD DisplayTest actuation : Press TO readPower supply : 9 Volt BatteryLow battery : warning at 7.0 voltsCalibration : Recommended every 12 monthsDimensions : 135 x 70 x 30mmWeight : 180 GmsWarranty : 12 Months

The Surface Resistivity Meter measures both surface resistance and resistance to ground. This is meant for use in evaluating a wide variety of ESD protective materials including tablemats, floor mats, and hard ESD laminates. It measures and displays Surface Resistivity as well as surface to ground and point-to-point resistances. These measurements can be done in the range of 10E12 ohms by using two 2.5-kilo (5lb) heavy electrodes or through internal probes. To check whether surface Resistivity is in accordance with EOS/ESD Association standards S-4.1.SPECIFICATIONS:Measurement Range (LCD) : 1X10E3 to 1X10E12 ohms & ohms/sqMeasurement Range (LED) : < 10E3 to > 10E12 ohms & ohms/sqMeasurement accuracy (LCD) : 0.1 decadeMeasurement accuracy (LED) : 0.5 decadeProbe Voltage : 100V +/- 5%Battery indicator : Green when battery is fully charged

The model SRM-02 surface Resistivity meter is a portable, versatile, instrument designed to accurately measure resistance between two points, surface to ground, and surface Resistivity is accordance with EOS/ESD Association standard S-4.1. The Surface Resistivity meter (included TESTING & MEASURING PROBES) is designed to make all the measurements. SPECIFICATION:Measurement Range : 1012 Ohms or Ohms/sqMeasurement Accuracy : Half decadeResolution : One decadeTest Voltage : 100V.Indication : Different Color LEDsTest actuation : Press To TestPower supply : 9 Volt BatteryLow battery : Warning at Test Voltage Of 80VDimensions : 135 x 70 x 30mmWeight : App. 200 Gms (With Battery)Calibration : Recommended every 12 monthsWarranty : 12 MonthsAccessories included : Surface to Ground cordOptional : Testing & Measuring Probes

Reliable on-the-spot measurement of static charges has been easier than with the portable SCM-01. Hand-held, yet highly accurate and low drift, the SCM-01 answers three basic questions:Is static present and on what Surfaces, materials or people ?How much static?What is the polarity of the Charge ?The instrument is ideal for use in such static sensitive environment as electronic component production and assembly areas, clean rooms, computer, medical and R&D Laboratories, surgical rooms, medical device manufacturer, printing pres, packing and production lines, etc.SPECIFICATIONS:Measurement Range : +/- 5kV At 2.5 CMSMeasurement Accuracy : +/- 10%Indication : Analog DialTest actuation : Press TO readPower supply : 9 Volt BatteryDimensions : 125 x 65 x 35 mmWeight : 180GMS (With Battery)Calibration : Recommended every 12 monthsWarranty : 12 MonthsOptional : Instrument Carry case

The Wrist strap Cum Dual Footwear tester is a jig type arrangement to test the validity of ESD Wrist strap; Slippons and Shoes and Independent measurement is taken simultaneously wrist_strap_dual_footwear_testerof both right, left foot and wrist strap at the same time. Other Footwear testers can only measure two foot at a time, or the combined resistance of both foot. The wrist strap cum Dual Foot Tester reduces the testing time by half, and offers the operator a visual and audible measurement of Pass or fail of both foot and wrist strap before entering the EPA. Operation of Wrist Strap: Connect the wrist strap cord to the instrument with the strap on the wrist; press gently on the metal sensor of the instrument. The instrument comes on automatically when this is done. The operator can check whether the resistance of the wrist strap falls within the acceptable range (0.75 to 10 Meg ohms), This is indicated by green (pass) LED lighting up. Operation of foot wears: Simply stand on the two stainless steel footprints and push the press to test button. The instrument comes on automatically when this is done. The operator can check whether the resistance of the Foot wears falls within the acceptable range of 0.75 to 100 meg ohms, This is indicated by green (pass) LED lighting up.Specifications:Wrist Strap Range : 0.75 to 10 Meg OhmsFoot Wear Range : 0.75 to 100 Meg ohms

The Model WSM-01 has independent circuitry designed to continuously monitor the connections to ESD earth of Wrist strap & Work surface.WRIST STRAP: This section continuously monitors the wrist strap to detect loss of continuity between operator and monitor. Conditions such as broken coils cords and improper contact with the skin are detected instantly to alert the operator before serious and expensive ESD damage can occur. As there is no resistance return path from the wrist strap, it uses the capacitive AC pulse principle to check if the operator is adequately grounded. The wrist strap section is automatically activated when it is plugged in. continuous monitoring reduces the need for periodic checks andalso ensures greater security. ESD WORK SURFACE: The work surface is monitored by a DC Resistive principle and a warning is given in case the surface to ground resistance exceeds the safe threshold value of 10 Meg ohms.

Easily mounts under the bench surface and offers 2 banana 4mm socket a single grounding cord from the bench mount connects both banana sockets to thebenchmount-copy earth. Each of the banana socket can be used to terminate ground cords of either table mats or wrist straps. Each operator working on a long table can be provided a bench mount socket for easy and convenient ground connection

The 3 pin plug is useful in situations where a ready made ground connection for antistatic products is not available. It can be plugged into any 3 pin Ac socket having proper earth connections. The phase and neutral pins are made of insulating polymer pins, while the metal earthing pin is directly connected to the banana socket underneath. A wrist Strap or a table mat can be easily grounded using any 3 pin AC outlet