BOPP Self Adhesive Tapes-Printed/Customised refers to any one of a variety of combinations of backing materials coated with an adhesive. Different backing materials and adhesives can be used depending on the intended use. BOPP Self Adhesive Tapes-Printed/Customised, PSA tape, self-stick tape or sticky tape consists of a pressure-sensitive adhesive coated onto a backing material such as paper, plastic film, cloth, or metal foil. It is sticky (tacky) without any heat or solvent for activation and adheres with light pressure. These tapes usually require a release agent on their backing or a release liner to cover the adhesive. Sometimes, the term "adhesive tape" is used for these tapes. Many pressure-sensitive adhesive tapes exhibit triboluminescence, observable in a dark room, when peeled off a dispenser roll or other surface. The adhesiveness of the tape does depend not only on the type of the tape but also on its macroscopic shape. Tapes with sharp corners start to detach at pointed corners. The adhesive strength can be sufficiently improved by cutting the edges as shown in the film.

Floor marking tapes are adhesive tapes used to mark hazards, divide spaces, create aisles, or provide directions. They are commonly used in industrial and manufacturing facilities for floor marking. They are made of multiple different materials, including PVC and vinyl, and vary in thickness from 5-mils to 55-mils for a wide range of durability options for manufacturing facility floor marking. The best floor marking tapes are usually 50 to 60 mils thick. Most tapes come in a variety of color options and even hazard patterns to meet U.S. Occupational Safety and Health Administration/ANSI requirements and other safety standards. Some tapes are made with higher reflectivity and may even glow in the dark. Floor marking tapes can also be useful for helping workers put materials and equipment back in the right place, making it a key 5S, Lean manufacturing implementation tools. Creating distinctions between finished goods, raw goods, to-be-repaired goods, and equipment ensures mistakes are minimized and productivity and safety are both at the highest levels.

Double-sided tape Foam is any pressure-sensitive tape that is coated with adhesive on both sides. It is designed to stick two surfaces together, often in a way which is not visible in the end product, due to it being in between the objects rather than overlaying them. This allows for neater-looking projects and better craftsmanship. Double-sided tape Foam can be either thin or dimensional. Dimensional tape is thicker, and is of particular use to retail and signage uses where it can be used to allow signs or displays to stand out with a 3-D effect. Double-sided tape Foam is created by applying a thin adhesive layer to each side of a carrier material. For example, double-sided Foam tape Foam, an easy-to-rip double-sided tape, is created by applying adhesive to two sides of Foam paper, which is then wound with a siliconed paper to avoid it sticking to itself. Most adhesive tapes are manufactured in log form, such as a large 1 to 3 meter wide roll, and then an adhesive tape converter is used to slit the rolls into the required widths.

In order to protect surface from dirt, scratch and moisture, the offered Surface Protection Tapes are used for coating panels during transportation and storage. These tapes are highly cherished among customers due to their excellent strength, high adhesiveness and tear resistant attributes. Surface Protection Tapes provide residue-free protection for any surface, whether painted, mill finished, or polished. Use on stainless steel, glass, aluminum, coated metals, and plastics. Our tapes are durable and offer excellent indoor and outdoor performance.

Tampering involves the deliberate altering or adulteration of information, a product, a package, or system. Solutions may involve all phases of product production, distribution, logistics, sale, and use. No single solution can be considered as "tamper proof". Often multiple levels of security need to be addressed to reduce the risk of tampering. Identify who a potential tamperer might be and what level of knowledge, materials, tools, etc. might they have. Identify all feasible methods of unauthorized access into a product, package, or system. In addition to the primary means of entry, also consider secondary or "back door" methods. Control or limit access to products or systems of interest. Improve the tamper resistance by making tampering more difficult, time-consuming, etc. Add tamper-evident features to help indicate the existence of tampering. Educate people to watch for evidence of tampering. Length of time available for tampering. Particularly in transit, anyone intending to tamper with tamper-evident-protected goods, valuables, cash and confidential documents generally only has a window of opportunity of a few minutes before discovery is likely. This makes it both difficult and unlikely that they will have time to open the packaging, examine or remove the items, and restore the packaging to its original untampered condition.

BOPP Self Adhesive Tapes-Plain refers to any one of a variety of combinations of backing materials coated with an adhesive. Different backing materials and adhesives can be used depending on the intended use. BOPP Self Adhesive Tapes, PSA tape, self-stick tape or sticky tape consists of a pressure-sensitive adhesive coated onto a backing material such as paper, plastic film, cloth, or metal foil. It is sticky (tacky) without any heat or solvent for activation and adheres with light pressure. These tapes usually require a release agent on their backing or a release liner to cover the adhesive. Sometimes, the term "adhesive tape" is used for these tapes. Many pressure-sensitive adhesive tapes exhibit triboluminescence, observable in a dark room, when peeled off a dispenser roll or other surface. The adhesiveness of the tape does depend not only on the type of the tape but also on its macroscopic shape. Tapes with sharp corners start to detach at pointed corners. The adhesive strength can be sufficiently improved by cutting the edges as shown in the film.

Double-sided tape Foam is any pressure-sensitive tape that is coated with adhesive on both sides. It is designed to stick two surfaces together, often in a way which is not visible in the end product, due to it being in between the objects rather than overlaying them. This allows for neater-looking projects and better craftsmanship. Double-sided tape Foam can be either thin or dimensional. Dimensional tape is thicker, and is of particular use to retail and signage uses where it can be used to allow signs or displays to stand out with a 3-D effect. Double-sided tape Foam is created by applying a thin adhesive layer to each side of a carrier material. For example, double-sided Foam tape Foam, an easy-to-rip double-sided tape, is created by applying adhesive to two sides of Foam paper, which is then wound with a siliconed paper to avoid it sticking to itself. Most adhesive tapes are manufactured in log form, such as a large 1 to 3 meter wide roll, and then an adhesive tape converter is used to slit the rolls into the required widths.

Aluminium foil (or aluminum foil), often referred to with the misnomer tin foil, is aluminium prepared in thin metal leaves with a thickness less than 0.2 mm (7.9 mils); thinner gauges down to 6 micrometres (0.24 mils) are also commonly used. In the United States, foils are commonly gauged in thousandths of an inch or mils. Standard household foil is typically 0.016 mm (0.63 mils) thick, and heavy duty household foil is typically 0.024 mm (0.94 mils). The foil is pliable, and can be readily bent or wrapped around objects. Thin foils are fragile and are sometimes laminated to other materials such as plastics or paper to make them more useful. Aluminium foil supplanted tin foil in the mid 20th century. Annual production of aluminium foil was approximately 800, 000 tonnes (880, 000 tons) in Europe and 600, 000 tonnes (660, 000 tons) in the U.S. in 2003. Approximately 75% of aluminium foil is used for packaging of foods, cosmetics, and chemical products, and 25% used for industrial applications (e.g. thermal insulation, cables and electronics). It can be recycled.

Duct tape, or duck tape, is cloth- or scrim-backed pressure-sensitive tape, often coated with polyethylene. There are a variety of constructions using different backings and adhesives. One variation is black gaffer tape, which is designed to be non-reflective and cleanly removed, unlike standard duct tape. Another variation is heat-resistant foil (not cloth) duct tape useful for sealing heating and cooling ducts, produced because standard duct tape fails quickly when used on heating ducts. Duct tape is generally silvery gray, but also available in other colors and even printed designs. During World War II, Revolite (then a division of Johnson & Johnson) developed an adhesive tape made from a rubber-based adhesive applied to a durable duck cloth backing. This tape resisted water and was used as sealing tape on some ammunition cases during that period.

BOPP Self Adhesive Tapes-Printed/Customised refers to any one of a variety of combinations of backing materials coated with an adhesive. Different backing materials and adhesives can be used depending on the intended use. BOPP Self Adhesive Tapes-Printed/Customised, PSA tape, self-stick tape or sticky tape consists of a pressure-sensitive adhesive coated onto a backing material such as paper, plastic film, cloth, or metal foil. It is sticky (tacky) without any heat or solvent for activation and adheres with light pressure. These tapes usually require a release agent on their backing or a release liner to cover the adhesive. Sometimes, the term "adhesive tape" is used for these tapes. Many pressure-sensitive adhesive tapes exhibit triboluminescence, observable in a dark room, when peeled off a dispenser roll or other surface. The adhesiveness of the tape does depend not only on the type of the tape but also on its macroscopic shape. Tapes with sharp corners start to detach at pointed corners. The adhesive strength can be sufficiently improved by cutting the edges as shown in the film.

Masking tape, also known as painter's tape, is a type of pressure-sensitive tape made of a thin and easy-to-tear paper, and an easily released pressure-sensitive adhesive. It is available in a variety of widths. It is used mainly in painting, to mask off areas that should not be painted. The adhesive is the key element to its usefulness, as it allows the tape to be easily removed without leaving residue or damaging the surface to which it is applied. The tape is available in several strengths, rated on a 1–100 scale based on the strength of the adhesive. Most painting operations will require a tape in the 50 range. Household masking tape is made of an even weaker paper and lower-grade adhesive.

BOPP Self Adhesive Tapes-Plain refers to any one of a variety of combinations of backing materials coated with an adhesive. Different backing materials and adhesives can be used depending on the intended use. BOPP Self Adhesive Tapes, PSA tape, self-stick tape or sticky tape consists of a pressure-sensitive adhesive coated onto a backing material such as paper, plastic film, cloth, or metal foil. It is sticky (tacky) without any heat or solvent for activation and adheres with light pressure. These tapes usually require a release agent on their backing or a release liner to cover the adhesive. Sometimes, the term "adhesive tape" is used for these tapes. Many pressure-sensitive adhesive tapes exhibit triboluminescence, observable in a dark room, when peeled off a dispenser roll or other surface. The adhesiveness of the tape does depend not only on the type of the tape but also on its macroscopic shape. Tapes with sharp corners start to detach at pointed corners. The adhesive strength can be sufficiently improved by cutting the edges as shown in the film.