Other Products / Services #1001894

Polysulphide Sealants are widely used for various construction sites, such as airports and for expansion joints in aerospace applications, sewage plants and other applications that require high chemical and UV resistance. We are enlisted among the leading Manufacturers, Suppliers and Exporters of Polysulphide Sealants from Maharashtra. Our Polysulphide Sealants are known for their excellent resistance against chemicals and fuels. We safely and securely deliver Polysulphide Sealants to buyers.

Availability :

• MOCN SEAL : High performance, two part, Polysulphide Sealants for expansion joints where large movement is anticipated in concrete construction. Excellent weathering characterstic & UV. Conforms to BS4254-1983, DIW18450, ASTWC920-87
• MOCN SEAL (P) : Pourable consistacy two part, Polysulphide Sealants, easy to apply, excellent adhersion and weather charactersticts. Resistance to common solvent, mild acids and alsalis.

Standards : BS-4254-1967.

Engineering Grouts are widely used materials in industries. They have properties of non-shrinking and free flow. They possess high strength for bolt pockets and base plates of machines in order to make them firm and vibration free. We are named among the prominent Manufacturers, Suppliers and Exporters of Engineering Grouts from Maharashtra. The Engineering Grouts that we fabricate are known for their optimum quality and reliability.

Availability :

• Mcon Nsg 40 : Non-Shrink, high strength, free flowing & self leveling, non-metallic chloride free cementitious grout for general purpose grounting of static load, as well as centrifugal and rotary machines in cement, textile, paper, steel industries etc. attains 500 kg /cm² compressive strength at 28 days. Expansion – 0.8% to 1.5%, Density – 1800 kg/m² water powder ratio – pourable 0.17, Flowable – 0.19.
• Mcon Nsg 60 : Non – Shrink, hgih strength, free flowing & self leveling, non – metallic, chloride free cementitious grout for general purpose grouting For dynamic load. Freely flows under base plates and bolt pockets. High early & Ultimiate strenght. Attains 650 kg/cm² compressive strength at 28 days. Expansion – 0.8% to 1.5% water powder ratio Pourable 0.15, Flowable 0.16.
• Mcon Super Add : Super plasticiser, shrinkage compensating, iron free, chloride free grout additive. Produces easy flowing cohesive grout, attains higher strength ideal for static load. Dosage : 200gms. Per 50kg of cement.
• Mcon Groupt EP : Non-Shrink, High strength, free flowing, three part, high performance epoxy grout. A unique epoxy grout system even for running industry with minimum production shut down. Ideal for very heavy dynamic loads like heavy duty rails, machineries, compressors, dowel bars, studs, Non-shrink, high strength, free flowing, three part, high performance epoxy grout. Etc. High tensile & flexual strength attains 970 kg/ cm² compressive strength in 7 days.
• Mcon Grout Eplv : Two part, pre formulated, low viscosity epoxy resin. It is used for injection of craks and cold joints in concrete structures. It bonds efficiently with substrate and with its ultra high strngth values restors structural integrity. It is suitable for damp or dry surface. The compressive strength of Mcon grout eplv is 75N/mm² at 7 days.
• Mcon Fix grout : High strength thixotropic, two part polyester resin grout. Vibration and corrosion resistant. Attains ultra high compressive and pull ut strength. Rapid setting and can be used under water. Designed for grouting of steel bars bolt into concrete, stones, machinery and brick work where speed of installation and early load bearing capacity is required.

We offer an optimum quality Water Reducing Admixture to our valuable buyers. The Water Reducing Admixture, we make available, is formulated from finest quality ingredients which are obtained from trusted vendors, thus, it is highly effective. Water Reducing Admixture is used in construction applications for the purpose of reducing concrete permeability. We are listed among the leading Manufacturers, Suppliers and Exporters of Water Reducing Admixture from Maharashtra.

Availability :

• Mcon Lnp : A water reducing admixture, ready to use aqueous solution of highly purified lignosulphonates which promotes complete hydration of cement. Chloride free, formulated to meet Astm C – 494 type a, IS : 9103. addition of lnp allows water reduction of up to 8 to 10%. Dosage - 150ml to 300ml / 50 kgs of cement, however the optimum dosage to be determined by site trails.
• Mcon RP : Mcon RP admixture is a ready to use aqueous solution of hydroxylated organic compounds. Addition of RP allows water reduction of up to 10 to 15% & gives the highest compressive flexural and tensile strength in concretes. Chloride free formulated to meet Astm C – 494 type "B & D", IS : 9103. Dosage - 200ml to 800ml / 50 kgs of cement, however the optimum dosage to be determined by site trails.
• Mcon Sp (N) : It is concentrated ready to use aqueous solution of organic polymers with high plasticizing effect. Addition of SP (N) to concrete allows a water reduction of up to 25 – 30% while maintaining the same slump. Chloride free, formulated to meet ASTM C – 494 type "A&F" IS : 9103.Dosage - 200ml to 800ml / 50kgs of cement, however the optimum dosage to be determined by site trails.
• Mcon SP : It is concentrated ready to use aqueous solution of organic polymers with high plasticizing effect. Addition of SP to concrete allows a water reduction of up to 30% while maintaining the same slump. Chloride free, formulated to meet Astm C – 494 type "D&G" IS : 9103. Dosage - 200ml to 800ml / 50kgs of cement, however the optimum dosage to be determined by site trials.
• Mcon Lw : Two in one integral water proofing admixture for concrete & mortar, it improves workability of all types of mix & makes concrete & mortar, it conforms to IS 2645. It is mixed with gauging water & then added into concrete, mortar, etc.
  Dosage : 150 ml per bag of cement.
• Mcon – LWP : High workable mortar plasticiser cum water proof plaster additive in powder form. It is chloride free & seals capillary poll in concrete & cement mortar thereby ellminating seepage of water. It conforms to IS 2645. It is mixed with concrete or mortar in dry condition. Dosage - 500 gms. Per bag of cement.
• Mcon Fibre : A unique fibre reinforcement for concrete & mortar. It improves tensile & flexural strength. Polypropylene fibres available in 6 mm & 12 mm sizes to be used in plaster, concrete & floor screeds for crack free & durable substrates. Used in mortar, concrete, floor screeds. Dosage - 1 Packed of 100 gms per bag of cement

Industrial Flooring Compounds are used to provide a strong texture to floorings. They help in making the floors dust proof, wear proof and corrosion proof. The Industrial Flooring Compounds, we offer, are highly durable and cost effective. We are listed among the leading Manufacturers, Suppliers and Exporters of Industrial Flooring Compounds from Maharashtra. We smartly package and efficiently deliver Industrial Flooring Compounds to buyers, safely and timely.

Availability :

• Mcon Top Floor : Top Floor is a mixture of graded, non metallic aggregate, binder and special additives. It is an economical concrete floor hardener. It is a grey coloured powder. Top floor is to be sprinkled on wet concrete @ 4 to 5 kg. Per m². Then finish the surface by hand or machine following. It hardens concrete makes monolithic bond with concrete. Used in areas where high abrasion resistance is required like factories, ware houses, car parks, commercial and industrial facilities, public plat forms, service stations, etc.
• Dosage : Light Traffic : 3 kg / m²  Heavy Traffic : 5-6 kg / m².
• Mcon Top Floor (M) : Ready to use single pack, hard wearing, abrasion resistant, metallic, smooth finish, anti – skid industrial flooring compound for medium to heavy duty traffic floors. Resists penetration of oil & water.
• Consumption : 5 kg/m², Mho's scale hardness 7 to 8.
• Mcon Screed Ep : Three pack, abrasion, impact, chemical resistant, anti-skid, high performance heavy duty epoxy based floor screed 4mm to 6mm thickness is recommended.
• Coverage : 2.6m² at 4mm thickness per pack of 25kgs
• Mcon Screed SL : Three pack, high performance, hardwearing, excellent adhesion, hygienic epoxy based self leveling screed. Can be made more attractive by sprinkling flakes which will ensure scratch resistance. Application 2mm thickness. Primer required.
• Coverage : 3.5m² @2mm thickness per pack of 12.5 kgs.

We are listed among the reputed Manufacturers, Suppliers and Exporters of Concrete Curing Compounds from Maharashtra. Concrete Curing Compounds are used to reduce the loss of water during concrete cure, producing, cracks free, stain free and corrosion free concrete. The Concrete Curing Compounds, we make available, are produced under the supervision of skilled experts who maintain an eagle eye on the whole process, to ensure high quality.

Availability :

• MCON CURE CC : Ready fo use economical Concrete Curing Compound. Become an integral part of Concrete surface & assists the Curing process by preventing water evaporation & dose not from films. Reduces possibility of shrinkage cracks. Coverage : 5-6 m² per Ltr.
  
  
• MCON CURE WC :White pigmented ready to use, non toxic, chloride free, cost effective Concrete Curing Compounds. Reacts with free lime & seals the pores completely thus reducing the water evaporation which assists, excellent curing process single coat application. Coverage : t to 6 m per ltr.
  
  
• MCON CURE WB WHITE : Wax based white pigmented, low viscosity Concrete Curing Compounds. this system ensues that the emulsion breaks down to from a non-penetrating continouns film immeditely upon contact with a cemnetitious surface. The imperviuos film permits more efficient hydration thus reducing shrinmkage and increasing durability. Coverage : 5-6 m² oer ltr. CONFORMS TO ASTMC C 309-81
  
  
• MCON RELEASE (SPL) : Concentrated & emulsified checmial mould releas agent. Non stainign easy to use & fiar faced finish. Concentrated nature reduces storage & transportation cost. Recommended during dry weather. Coverage : 150-160m² per ltr. depending upon the surface.
  
  
• MCON RELEASE (XL) : Ready to use, oil based chemical mold release agent for quick, clean & easy strippling of moulds, high quality, fair faced surface & stain free concrete surface. Can be used with steam curing. Recommended even on wet surface abd reainy season. Coverage : 40-60m² per ltr.

Our company is a renowned Manufacturer, Supplier and Exporter of Mcon Wall Putty from Maharashtra. The Mcon Wall Putty we make available is white cement based and water resistant. Our Mcon Wall Putty is especially used to seal the pinholes and the blow holes getting exposed on concrete/plastered surfaces. It can be applied even on internal and external surfaces. The Wall Putty offered by us is known for its increased adhesion strength.

Shelf Life & Storage : MCON WALLPUTTY will have a shelf life of 12 months in unopened containers when kept in dry conditions at a temperature between 5ºC to 45ºC. Storage at higher temperature or high humidity may reduce shelf life.

Health & Safety : MCON WALLPUTTY is alkaline in nature. Avoid inhalation of dust and contact with skin and eyes. If contact with skin occurs rinse with plenty of water and seek medical advice.

Specification : MCON WALLPUTTY is a white cement based, water resistant requiring precise quantity of water for substrates and is an inert filler material available in 20 kg plastic lined sacks

Mcon Wallputty : White Cement Based Wall Putty

• Synthetically bound ready to use compound for inert filler material
• Only precise quantity of water to be added
• Ensures use on all common types of building interiors
• Excellent adhesion
• Excellent thixotropicness
• Due to good bonding property it is more durable.
• Excellent whiteness, so gives good exposure.
• Excellent finishing and easy to apply
• Completely applied putty will not allow water penetration.
• Provides smooth, silky and featheredged finish to substrate to facilitate better texture of paint
• Application of MCON WALLPUTTY with workmanship makes exterior and interior look aesthetic
• No curing is required.
• Prevents growth of algae and fungi on walls
• It is in dry powder form and does not produce any kind of filth smell at the time of application.

Uses : Mcon Wall Putty is suitable for :

• Use on both precast and concrete structures like sand cement plaster, level brick work and block work, exposed concrete.
• Plywood
• AC sheets
• Gypsum boards
• Can also be applied for redecoration on firm, old painted areas.

Application :

• Surface Preparation : Make sure that the surface is absolutely clean, dry and free from dust, grease and foreign materials. There should be a time gap of at least 10 days before MCON WALL PUTTY application is done on newly plastered surfaces. Ensure that the surface is fairly even. If concrete surfaces are to be painted, it shall be washed with a water jet at 3000 psi and all loose concrete should be getting removed and all pin holes and blow holes should get opened.
• Application : MCON WALL PUTTY is a ready to use material. Take 2.5 to 3 parts of powder to 1 part of water by volume and mix it thoroughly for 10-15 mins. Apply the prepared material with putty knife from bottom to top by ensuring complete filling of holes with putty material and featheredged finish. The coating should be about 1mm thick. Second coat of MCON WALL PUTTY depends up on the exposed surface after first coat (generally both coat do not exceed 2mm) and leave the surface to dry overnight. The drying time of each coat should be 3 hours, but will vary from surface to surface.(depending upon
• atmospheric conditions) Finishing  : Make sure that the material has fully covered the substrate and dried. If putty applied surface is rough, surface should be made smooth by rubbing suitable emery paper on it. Ensure that the paper is fine and does not cause scratches on the MCON WALL PUTTY coating area. The MCON WALL PUTTY area is now ready for painting.
• Painting : The smooth surface finished with MCON WALL PUTTY does not require any putty or primer before paint application. Just apply any paint as per the manufacturer's standard specification. Intact painting can commence within a few hours of MCON WALL PUTTY.

Packing & Coverage

• Packing : MCON WALL PUTTY is available in 5kg.and 20 kg. plastic lined sacks.
• Coverage : MCONWALL PUTTY has a coverage of 2.5 to 3m² per kg when applied at a thickness of 1mm.

Mcon WallputtyWhite Cement Based Wall Putty TM

• AN  ISO 9001 - 2008 (QMS) CERTIFIED CO
• AN  ISO 14001 - 2004 (EMS) CERTIFIED CO
• AN  ISO 18001 - 2007 (OHSAS) CERTIFIED CO

Readymix Mortar & Adhesive is widely used in construction sites to add permeability resistance and strength to surfaces. It is applied on walls and floors to reduce the risks of cracking or flaking. We are listed among the leading Manufacturers, Suppliers and Exporters of Readymix Mortar & Adhesive from Maharashtra. We use high grade materials in the production of Readymix Mortar & Adhesive and offer it at competitive prices.

Availability :

• Mcon Ready Plaster : Fibre reinforced ready mix plastering mortar for external walls in bricks, blocks & concrete walls. Reduces drying shrinkage cracks. Increase plastic life of mortar. Low mortar dropping while plastering, hence cost effective. Coverage : 12-16 sq. Ft per 40 kg. Of bag at a thickness of 15 – 16 mm.
• Mcon Mortar : Mortar is a cementitious powder available in grey colour to fix ceramic tiles. Excellent adhesive, cost effective with waterproofing characteristics. Available in 20 kg. Bag. Will cover 5-6m² with thickness of 4 to 5mm.
• Mcon Nsa Grey : Is a cementitious powder. It is a high performance, non shrink tile adhesive. It conforms to Bs 5980. used for permanene installation of ceramic, mosaic, quarry, terrazzo, vitrified tiles to masonary, cementitious substrates, dry walls & tile on tile applications. Coverage : 3-4m² / 20 kg. Bag.
• Mcon NSA White : Is a polymer modified cementitious white tile adhesive used for fixing normal & medium porosity tiles of regular size on new substrates with regular traffic. It is specially recommended for glass mosaic due to its white colour which adds to the aesthetic look. Coverage : 3 -5 kg/sqm for 3mm bed thickness depending on surface undulations.
• Mcon Grout : Tile grout is a fine, non shrink powder, available in various colours. It sets a decorative, non fading, water resistant, and crack proof grout. Grouting of tile joints in following locations : - swimming pools, toilets, bathrooms, hospitals, factories, etc. Available in 500 gm, 5, 25, kg. Packing. Coverage : 24-28 running feet / kg. @ 2 mm width.
• Mcon Screed (TA) : Three pack, epoxy based low odour chemical resitance tile adhesive, with good griping to surface. Applicable for vehicular & pedestrain traffic. Coverage : 25 kg. Covers 2.6 m² at 4mm thickness.
• Mcon TG (EP) : Thixotropic, solvent free epoxy tile grout, resistant to water, weathering & wide range of chemicals. Available in various colours.
• Mcon Wallputty : Wallputty is a white cement based powder blended with polymer and hydrophobic additives for concrete / mortar walls and ceilings. Superior adhesive strength, durability & increase life of paints. No primmer required for any kind of paints. Smooth & durable surface suitable for all kinds of paints. Used for leveling uneven concrete & mortar surfaces, interior & exterior applications. Coverage is 15-20m² / 20 kg. At 2mm thickness depending on the surface.
• Mcon super Coat : is a acrylic putty, snthetically sound, ready to use compound of inert filler material.l it is one of the best product of its kind of available in market, provides a very strong durable foundation and bring out the best performance from the finish paint both in looks and in durability.
• Mcon ultra Gyp bond : is a green colored, high viscous solution which provides mechanical as well as chemical bonding for gypsum based materials. It gives very high bond strength to all gypsum based materials. It meets the bond strength requirement of BS5270. It has great tensile and flexural strength.
• Mcon ultra Gyp bond (P) : Is a cementitious powder available in grey colour. It gives very high bond strength to all gypsum based materials. Available in 25 kg bag.
• Mcon super Tuff : Super tuff is polymerized wall texture system with micro aggregates for interior and exterior surfaces. It can be used to create a wide variety of textured patterns that will enhance any decorative system. Available in 30kg HDPE bags and covers 3 to 4 sqft approx @ 1kg depending on the surface.
• Mcon Block Fix : Is a ready to mix, self curing cementitious mortar for mounting and bonding aerated autoclaved concrete, hollow blocks & bricks. Mcon block fix is made from cement graded sand and polymeric additives which helps in providing mechanical bond as well as excellent adhesion between the blocks. Coverage : 3-5 kg/sq m² at 3mm thickness depending upon the surface.

Readymix Mortar & Adhesive is widely used in construction sites to add permeability resistance and strength to surfaces. It is applied on walls and floors to reduce the risks of cracking or flaking. We are listed among the leading Manufacturers, Suppliers and Exporters of Readymix Mortar & Adhesive from Maharashtra. We use high grade materials in the production of Readymix Mortar & Adhesive and offer it at competitive prices.

Availability :

• Mcon Ready Plaster : Fibre reinforced ready mix plastering mortar for external walls in bricks, blocks & concrete walls. Reduces drying shrinkage cracks. Increase plastic life of mortar. Low mortar dropping while plastering, hence cost effective. Coverage : 12-16 sq. Ft per 40 kg. Of bag at a thickness of 15 16 mm.
• Mcon Mortar : Mortar is a cementitious powder available in grey colour to fix ceramic tiles. Excellent adhesive, cost effective with waterproofing characteristics. Available in 20 kg. Bag. Will cover 5-6m^{2 with thickness of 4 to 5mm.}
• Mcon Nsa Grey : Is a cementitious powder. It is a high performance, non shrink tile adhesive. It conforms to Bs 5980. used for permanene installation of ceramic, mosaic, quarry, terrazzo, vitrified tiles to masonary, cementitious substrates, dry walls & tile on tile applications. Coverage : 3-4m^{2 20 kg. Bag.}
• Mcon NSA White : Is a polymer modified cementitious white tile adhesive used for fixing normal & medium porosity tiles of regular size on new substrates with regular traffic. It is specially recommended for glass mosaic due to its white colour which adds to the aesthetic look. Coverage : 3 -5 kgsqm for 3mm bed thickness depending on surface undulations.
• Mcon Grout : Tile grout is a fine, non shrink powder, available in various colours. It sets a decorative, non fading, water resistant, and crack proof grout. Grouting of tile joints in following locations : - swimming pools, toilets, bathrooms, hospitals, factories, etc. Available in 500 gm, 5, 25, kg. Packing. Coverage : 24-28 running feet kg. @ 2 mm width.
• Mcon Screed (TA) : Three pack, epoxy based low odour chemical resitance tile adhesive, with good griping to surface. Applicable for vehicular & pedestrain traffic. Coverage : 25 kg. Covers 2.6 m^{2 at 4mm thickness.}
• Mcon TG (EP) : Thixotropic, solvent free epoxy tile grout, resistant to water, weathering & wide range of chemicals. Available in various colours.
• Mcon Wallputty : Wallputty is a white cement based powder blended with polymer and hydrophobic additives for concrete mortar walls and ceilings. Superior adhesive strength, durability & increase life of paints. No primmer required for any kind of paints. Smooth & durable surface suitable for all kinds of paints. Used for leveling uneven concrete & mortar surfaces, interior & exterior applications. Coverage is 15-20m^{2 20 kg. At 2mm thickness depending on the surface.}
• Mcon super Coat : is a acrylic putty, snthetically sound, ready to use compound of inert filler material.l it is one of the best product of its kind of available in market, provides a very strong durable foundation and bring out the best performance from the finish paint both in looks and in durability.
• Mcon ultra Gyp bond : is a green colored, high viscous solution which provides mechanical as well as chemical bonding for gypsum based materials. It gives very high bond strength to all gypsum based materials. It meets the bond strength requirement of BS5270. It has great tensile and flexural strength.
• Mcon ultra Gyp bond (P) : Is a cementitious powder available in grey colour. It gives very high bond strength to all gypsum based materials. Available in 25 kg bag.
• Mcon super Tuff : Super tuff is polymerized wall texture system with micro aggregates for interior and exterior surfaces. It can be used to create a wide variety of textured patterns that will enhance any decorative system. Available in 30kg HDPE bags and covers 3 to 4 sqft approx @ 1kg depending on the surface.
• Mcon Block Fix : Is a ready to mix, self curing cementitious mortar for mounting and bonding aerated autoclaved concrete, hollow blocks & bricks. Mcon block fix is made from cement graded sand and polymeric additives which helps in providing mechanical bond as well as excellent adhesion between the blocks. Coverage : 3-5 kgsq m^{2 at 3mm thickness depending upon the surface.}