Other Products / Services #2135831

Infrared Thermometers (Gun Type) Dual Input Thermometer & Infrared Thermometer Thermo Hygrometer & Hygro Anemometer LUX Meter & RPM Meter Electrosmog Meter Environment Testing Instruments (Mini Series)

• Infrared Thermometers (Gun Type)

• Handheld Thermal Imaging Camera

• Electrosmog Meter

• Digital Sound Level Meter

• Environmental Testing Instruments

We are one of the famous company, who are manufacturer of solar analyzers.

Electronic energy meter, power transducer, precision power meter and other power and energy monitoring devices, Over current protection circuit of motor and other electrical appliances.

Model, Input Range, CTR PTR, Scale Display, Data Hold (Optional), Auxiliary Supply, Accuracy Class and Display Height

Max. solar system power (Pmax) search by Auto-scan: 1000V, 12A (12000W capability), The analyzer and the Remote Solar Detector is connected by Bluetooth wireless communication (Bluetooth 2.1 + EDR Class 1), The Remote Solar Detector is moisture-proof, Intelligent test logic with no personnel attendance required in the field, Solar system analyzer waits and tests the system until appropriate sunlight irradiance is detected, Max. voltage (Vpm) at Pmax, Max. current (Ipm) at Pmax.

In Electrical System, sometime without identification of Phase Sequence it is impossible to proceed further. The Phase Sequence Indicator is used to determine the Phase Sequence R, Y & B of 3 Phase Voltage. It is important that Phase Sequence is known properly prior to energizing electrical motor & other equipment, as incorrect connection could cause damage to the equipment. The correct operation of measuring instrument like 3 Phase Energy Meter, 3 Phase Power Meter and Automatic Control of devices also depend on the Phase Sequence.

Calibration of AC Volt, Amp, Frequency Meters, Calibration of DC Volt, Amp Meters, Calibration of Resistance Meters, Insulation Testers, Step adjustment of Output Signal : 10 %FS, 1 %FS, 0.1 %FS, 0.05 %FS

Moving Iron Meter of 90 Deflection with Interchangeable Scale Facility, Moving Iron Spring Mounted Jewel Bearing Suspension, Model, Input Range, CTR PTR, Scale

9V Eveready Type 216 or Equivalent & External Battery Pack (6 x 1.5 V AA Batteries), 4 and 5 Digits with Annunciator, Operating Environment :- 0 C to 50 C (32 to 122 F), RH < 85%.

Current Measurement, Monitoring and Protection for Electrical Wiring and Equipment, Current and Power Measurement for Electric Motors, Lighting, Air Compressor, Heating and Ventilation System, Air - Condition Equipment and Automation - Control System, Current, Power and Energy Monitoring Device, Relay Protection Device, Wide Inner Window, Allowing Clamping of Big Cables or Bus - Bar, Clamp - On Design, Fastening Safe, Easy to Install, Portable.

Battery Tester which can check the capacity condition of different types of Motorcycle and Motorcar batteries from 2 to 200Ah. The product consists of a DC Voltmeter, Load Resistor and Testing Clip. The state of the battery is indicated on the meter dial as 'FULLUP' (White), 'NORMAL' (Green), 'RECHARGE' (Yellow), 'DISCHARGE' (Red) directly.

Set FunctionRange switch to desired current type (DC or AC) and range. If magnitude of current is not known, set switch to the highestrange and reduce until a satisfactory reading is obtainedTurn off power to the device or circuit being tested and discharge all
capacitors. Open the circuit in which current is to be measured. Now securely
connect test leads in series with the load in which current is to be
measured.Turn on power to the device or circuit being tested.For current measurment of 200mA or greater, connect the red test lead
to 20 A input terminal & black test lest lead to the COM input terminal.
If the resistance being measured is part of a circuit, turn off power to
the circuit and discharge all capacitors.Overrange indicationHighest digit of(1) or (-1) is diplayed
at MSDTest leads (pair) x 1, spare fuse 0.8A
250V x 1, battery (installed) x 1,
instruction manual x 1 &
carring case x 1 Single, standard 9-volt battery, Eveready 216 or equivalent. displayed when the battery
voltage drops below the operating
voltage

Temperature 40C 1000C -40F 1832F
Power : Two 1.5 V 'AA' Battery
Low Power Indication
Battery Life 200 hours typical
Dimensions : 180 x 90 x 52mm (approx), Test Leads (Pair), Holster, Battery (installed), Instruction Manual & K Type Thermocouple (upto 260C).Power : Two 1.5 V 'AA' Battery
Low Battery Indication
Measuring Category : CAT III 1000V, CAT IV 600 V

Models :PG08T

We are supplying products like as SPLIT CORE CURRENT TRANSFORMERS

Analysis of 3P4W, 3P3W, 1P2W, 1P3W Systems, Display of 35 Parameters in one screen (3P4W), Programmable CT (1 to 600) and PT (1 to 3000) Ratios, Analysis of total Harmonics Destortion (THD-F), Facility to retrieve Power Data & Harmonics on Meter Screen, Facility to retrieve Power Data & Harmonics on Meter Screen

We are engaged in supplying of calibrating equipments.

Digital panel meters and modules power line transducers analog panel and switchboard meters multifunction meters.

• Digital Multimeters

• Digital Clampmeters

• Analog & Digital Insulation Testers

• Leakage Current Tester and Clamp-On Earth / Ground Resistance Tester

• Micro - Ohmmeter / Milli - Ohmmeter

• LCR Meter

Clamp-on power meter harmonics analyser.

 

• Clamp-On TRMS Power Meter

• Harmonics Analyser, Harmonic Tester, Energy Auditor

We are leading supplier of analog panel.

We are an eminent and leading trader of digital clampmeters.

We are an eminent and leading trader of INFRARED THERMOMETERS

We are engaged in supplying of INFRARED THERMOMETER