Post Buy Requirement
Mec Shot Blasting Equipments Pvt. Ltd.
Jodhpur, Rajasthan, India
Add Review

Our Products

  1. Construction Machinery & Equipment 7 Products available
  2. Abrasives & Grains 3 Products available
  3. Dust Collectors 6 Products available
  4. Cleaning Machine 7 Products available
  5. Others 79 Products available

Other Products / Services

Hanger Type Wheel Shot Blasting

Hanger Type Wheel Shot Blasting is designed for automatic efficient shot blasting, to descale and remove rust from job rotating on rotary turn table. The job is loaded on the door mounted turn table and fed in the blasting cabinet where they are blasted inside the cham.
View Complete Details

Single Screw Partial Reclaim System

A Single Screw Partial Reclaim System is the most economical floor design available. The system contains the major components heavy-duty screw, belt and bucket elevator, air-wash separator, perforated storage hopper with a caged man ladder and handrail. This is a basic "automatic" reclaim package that can be expanded to and "h", "u" or full floor reclaim system.
View Complete Details

U Shaped Partial Reclaim System

The U Shaped Partial Reclaim System adds two longitudinal metered screw assemblies along each side wall of the blast room. The position of the screw assemblies allows automatically reclaiming approx. 60 - 90% of the blast media. This floor design is typically utilized in a "flow-through" room configuration where heavy work pieces and/or material handling devices can drive into the room and position the work piece on the steel covered concrete floor located between the longitudinal screws.
This system is best suited for medium to high production.
View Complete Details

H Shaped Partial Reclaim System

The H Shaped Partial Reclaim System adds two longitudinal screw assemblies along each side wall of the blast room. The position of the screw assemblies allows the abrasive delivered from the blasting nozzle, which is either blown or rebounded off the work piece, to strike the side walls and fall into the screws, automatically reclaiming approx. 60 - 90% of the blast media.
This system is best suited for medium to high production.
View Complete Details

Acoustic Chamber

We are glad to present ourselves among the world class Acoustic Chamber manufacturers and suppliers in india. We have established several landmarks in the field of manufacturing bets quality acoustic chamber and acoustic test chambers. our acoustic chamber is provided with ventilation system that discharges fresh air in the atmosphere. Our acoustic chamber helps in reducing the noise level considerably and is also very cost effective.

to provide acoustic flame spray room for industrial application.

to reduce noise level (from noise level produce inside acoustic flame spray chamber assumed maximum 110 dba to outside acoustic flame spray room to 75 dba). Noise level reduction is appx. 35 dba. to ventilate acoustic flame spray room from fumes and dust created during industrial process and treats them in dust collector so that clean air is discharged into atmosphere.
View Complete Details

Full Floor Reclaim System

The Full Floor Reclaim System utilizes multiple screw assemblies to create a fully automatic abrasive reclaim system, where 100% of the blast media is returned to the separator system during the blasting operation.

this system is best suited for high production requirements.
View Complete Details

Stainless Steel Sheet Blasting Machine, Stainless Steel Plate Blasting Machine

We have Stainless Steel Sheet Blasting Machine and Stainless Steel Plate Blasting Machine to achieve homogeneous satin finish on both side of ss sheet glass bead blasting is carried out in the offered model : sb-151626 spl. It operates on suction-induction principle of abrasive blasting. The operator place the sheet on roller conveyor such that plate gets inserted into the vertical drive roller. The vertical drive roller conveyor carries it into blast chamber where blast gun move vertically on both the sides, thus, finishing it's external surface.

used abrasive/glass beads and dust created during blasting is sucked through suction hose to reclaimer where abrasive is reclaimed and collected in a storage tank for recycling and the dust is carried ahead and collected inside filter bags and clean air is discharged into the atmosphere. The operator has only to load and unload the sheet on and from the roller conveyor.

glass bead finishing of ss sheet to achieve homogeneous satin finish on both sides.

base material: 300-400ss
sheet size max.: 2500mm x 4000mm
sheet size min.: 600mm [w] x 1000 mm [l]
sheet thickness: 0.6 to 5 mm
blasting material: glass beads, "ad" grade upto 'o' grade
blasting required: both sides of sheet.
View Complete Details

Portable Blasting Machine

  • length 5 meters.
The abrasive blasting as a finishing process has been successfully utilized on metal, glass, and ceramics, plastic and stone. Its functions include Deburring, descaling, peening, polishing, stress relieving, Deflashing and cleaning. Portable abrasive blaster pressure feeds the system of abrasive propelling and results in higher production rates. The pressure vessels are tested to 250 psig and coded. Blast nozzles special design and tungsten carbides lined, result in long service life. It is equipped with high static and low weight blast hose. The remote control ON OFF is in operators' hand and requires no electric connection.
View Complete Details

Stone Texturing Machine

Stone Industries are advancing towards development for Sand Stones, Marble Panels, Granite, Cement Paving Blocks to achieve required roughness on one side either for good bonding strength or esthetic look after laying on the Room flooring & Road Side Pavements. Mec Shot has recently designed, developed, manufactured & successfully installed Airless Shot Blasting Roller Conveyor Machines for different usages like Sand Stones, Marble Panels, Granite and Cement Concrete Interlocking Paving Blocks. Shot Blasting is a mechanical surface preparation process or technique to improve the bonding strength of job by blasting with small balls. Roughness is formed on the surface of the job by the striking tinny spherical balls.
View Complete Details

Portable Abrasive Blasting Machine

  • Features The machine is provided with an automatic mushroom valve (filling valve) for quick refilling of abrasive.
The abrasive blasting as a finishing process has been successfully utilized on metal, glass, and ceramics, plastic and stone. Its functions include Deburring, descaling, peening, polishing, stress relieving, Deflashing and cleaning.Portable abrasive blaster pressure feeds the system of abrasive propelling and results in higher production rates. The pressure vessels are tested to 250 psig and coded. Blast nozzles special design and tungsten carbides lined, result in long service life. It is equipped with high static and low weight blast hose. The remote control ON OFF is in operators' hand and requires no electric connection.
View Complete Details

Portable Abrasive Blaster

Portable Abrasive Blaster The abrasive blasting as a finishing process has been successfully utilized on metal, glass, and ceramics, plastic and stone. Its functions include Deburring, descaling, peening, polishing, stress relieving,
View Complete Details

Rotary Indexing Machines

Rotary Indexing Machines with Rotary Indexing Hanger for surface preparation of Aluminum Dye Casted automobile engines parts. The Casted Blocks are loaded one on each Rotary.
View Complete Details

Roll Etching Machines

Roll Etching Machines is specially designed for surface etching & cleaning the rolls of variable sizes to generate desired roughness matte finish on roll out steel sheets. The machine operates on the direct pressure principle of abrasive.
View Complete Details

High Speed Airless Blast Wheel

High Speed Airless Blast Wheel a new wheel which gives an increased blast pattern and cleaning area. The casing is protected with wear resistant liners. Whole wheel assembly is designed in such a way that it is compact and easy for maintenance.
View Complete Details

Tunnel Type Wheel Shot Blasting

Tunnel Type Wheel Shot Blasting with number of blast wheels varies according to the production output available. This is the most used and flourishing series for the long structural, channels, angles, plates, gratings, pipes.
View Complete Details

Diabola Type Wheel Shot Blasting

Diabola Type Wheel Shot Blasting is engineered for inline cleaning of external surfaces of LPG cylinders. The machine is simple to operate with minimum maintenance and the operator has to simply load and unload the cylinders on rotating diabolic rollers.
View Complete Details

Tumblast Type Wheel Shot Blasting

Tumblast Type Wheel Shot Blasting They have been designed to carry out the multifarious jobs of cleaning and peening in lesser time and of a better quality than all other makes of the machine.
View Complete Details

Swing Table Type Wheel Shot Blasting

Swing Table Type Wheel Shot Blasting are sturdy, rugged and proven across a wide variety of working conditions. They have been designed to carry out the multifarious jobs of cleaning and peening in faster time and of a better quality than all other makes of the machine.
View Complete Details

Trailers Wheel Shot Blasting

Tippers and Trailers Wheel Shot Blasting get affected with variable atmospherically conditions. To protect them, these structures are blasted and required roughness is achieved good bonding strength for painting powder coating.
View Complete Details

Airless Shot Peening Machine

Airless Shot Peening Machine The operator has to place the coil springs over the adjustable leaner rollers on which it rotates and moves forward. The springs enter in the cabinet where a pair of wheels shot peen the coil springs.
View Complete Details

Blast Room Standard

The layouts of complete Blast Room System are always different from plant to plant, every blast room must be designed independently depending upon the customers requirement. MEC SHOT offers variety of Blast Room designs and system configurations which allow us to design a blast room facility uniquely tailored to meet the economic production, safety & environmental concerns of each customers.

Blast room equipment is used in a wide variety of industries that require surface preparation prior to the application of a protective coating. The surface of the work piece is cleaned by a mixture of abrasive and high pressure compressed air being directed at the work piece by blast nozzle. The blast room contains the abrasive being shot at the work piece, as well providing lighting & ventilation for the operator's safety.
View Complete Details

Pre-Heating Room

The painting and baking Oven are suitably designed to make the system eco-friendly and power saving. The painting and baking chamber are used for paint spraying the substances and baking in the same chamber. During painting the ventilating air is re-circulated by exhaust fans to keep the spray zone user friendly for the operator.

During baking operation ventilating and re-circulating air is passed through a gas oven chamber in the baking room to bake the substance at preset temperature. The acoustic panels in flame spray room have been provided for heat resistance and maintain outside and inside temperature during baking. Fumes and dust created during the process are cleaned in the inlet air filter and paint trap. Thus, clean air is discharged in the atmosphere.
View Complete Details

Tyre Mould Machine

The mold is clamped in horizontal position on the turn table using centering plates & four heavy duty T-slot clamps. The turn table is tilted hydraulically at suitable angle. The work car with turntable and mold is driven inside the cabinet. The turn table is rotated through electric motor with gear box arrangement. A spring is provided for holding the gun arrangement to avoid fatigue of operator. The abrasive is pressurized in a pressure vessel by compressed air and then forced through the nozzle to blast clean the trye mold.
View Complete Details

Blast Hose

We offer Blast Hose. Highly abrasion resistance, flexibility with lower bend radius, anti static, four ply rating strength.
View Complete Details

Down Draft, Paint Spray Booth

Paint Spray Booth is an investment that pays rich dividends by providing superior quality finish, in productivity & better working conditions.

paint spray booth with water curtain type wet fume collect is used for safe, healthy and quality spray painting. The health and explosion hazardous paint fume particles are sucked by the partial vacuum created by the exhaust fan through a curtain of water. Thus, air discharge into the atmosphere is clean and keep the working environment clean and friendly.

construction & design:

the practical expertise enables us to design the water curtain spray booth with superior performance. The spray booth is modular in construction so that booth can be easily installed, modified or integrated into complete plant. The additional middle suction, clearly provides improved air guidance and better suction of hazardous paint fume particles. The water film thickness on the drain wall can be adjusted individually via throttle valves. Moreover, the unit meets osha's safety requirements.

special features:

enhance quality of work.
operator comfort & health.
safety & law in compliance with stringent.
pollution control norms.
View Complete Details

Belt Conveyor

We have engineered and supplied dry type Belt Conveyor blasting machine for flat components for higher production rate. The supplied machine works either on direct pressure or suction-induction principle of blasting.

the components are placed on one side of the belt conveyor which carries the job inside the cabinet through side vestibules. Blasting is accomplished by reciprocating blast nozzle arrangement inside the cabinet.

after blasting, air blow guns are provided to air wash the blasting components for removing residual abrasive/dust. The operator has to simply unload the job from belt conveyor on other side of the cabinet. Multi blast gun can be provided depending on the production rate.

the abrasive recycling is automatic and dust generation through blasting process is collected inside the dust collector, thus keeping environment clean and friendly.
View Complete Details

Stainless Steel Flat Machine

We offer Stainless Steel Flat Machine. The machine is engineered for inline cleaning of external surface of stainless steel flats to reputed customers. The machine is simple to operate with minimum maintenance and operator has to simply load and unload the stainless steel flats on rotating rollers.

the abrasive media generally used is c.i. Grit of 25 mesh. The edges of the stainless steel flats especially are required to be blast cleaned to remove rust, corrosion & edges defect.

the machine is highly productive and featured with roller arrangement, 4 high speed blasting nozzles, abrasive recovery and cleaning system, dry dust collection unit and control panel.

the machine is suited for continuous working. The stainless steel flats are placed on motorized roller arrangement, which moves the stainless steel flat forward inside the blast chamber. The stainless steel are flat exposed to the abrasive blast stream through the 4 blast nozzle assembly for blast cleaning. The dust created during blasting is separated & collected in pleated filter bag dust collector and clean air is discharged to atmosphere keeping the environment clean and eco-friendly.
View Complete Details

Teflon Coated Cookware

Our Teflon Coated Cookware is popularly known as non stick cookware are of aluminium and require surface cleaning prior to teflon coating for removal of oxide layer as well as to impart surface roughness to facilitate proper adhesion of teflon coating.

to accomplish blast cleaning process, we have developed and supplied air operated blasting cleaning machine to almost all leading user industries.

the abrasive blast cleaning machine is featured with rotating satellites and rotary turntable with multi blast guns oriented at different blasting stations. Air was guns are also provided to air was the blasted utensils to remove residual dust.

the operator has to simply load and unload the cookware on and from the satellites located on the rotary table. The satellites rotate while inside the cabinet. The blast guns also reciprocate or oscillate and are set according to the size of the cookware. The abrasive recycling is automatic and the dust generated during blasting process is collected in the dust collector, this keeping environment clean and friendly.
View Complete Details

Cylinder Id Cleaning Blast

We offer Cylinder Id Cleaning Blast. To blast clean internal surface of seamless high pressure cylinder of maximum dia 400 mm 2300 mm [l] and minimum 223 mm 600 mm [l], maximum weight 180 kg. Motorized door with diabola arrangement for loading of cylinder in cabinet and locators for positioning of cylinder neck.

bulk blaster motorized turn table vertical movement of lance nozzles through chain and sprocket arrangement. Limit switches are provided for stroke adjustment.
View Complete Details

Indexing Machine

We have Indexing Machine and Abrasive blasting machine for automotive component
we have developed an equipment to descale, surface preparation and other finishing application on automotive component like gears, shafts, camshafts, spiders, brake shoe, piston head etc. The machine operates on the sunction principle of abrasive blasting. It incorporate highly engineered indexing turntable and hydro pneumatic gun reciprocation arrangement.

in machine, there is hi-tech synchronization between gun reciprocation and job rotation, it descale the automotive component and produces a uniform finish.
View Complete Details

Shot Peening Equipment

  • Features Easy maintenance, High functionality, Robust structure
View Complete Details

Robotic Shot Peening M/c

A Shot Peening Cabinet, with a acoustical enclosure and 6 Axis Industrial Robot for shot peening of Turbine Blades. The machine is fully programmable.
A Turntable interpolates with industrial robot and provides 7 adjustable axes. The nozzle is mounted on Robot Arm to provide even intensity and coverage over the width, length and height of the part envelope. Special cloth is provided to protect the robot arm.
View Complete Details

Blast Room Enclosure

We offer Blast Room Enclosure. The modular blast room is specially ventilated and illuminated for enclosed abrasive blasting, and is a fully sealed, dust tight, all steel structure. The components are prefabricated for simple bolt-together erection, with little or no job site welding required. The enclosure stands by its own structural support without connections to the surrounding facilities. Internally, the enclosure has no areas, other than the floor, where airborne media or dust may be captured.

the size of the enclosure depends on:

the size of the job
number of operators &
adequate working space around the job.
View Complete Details

Lpg Cylinder

We offer Lpg Cylinder. The machine is engineered for inline cleaning of external surface of lpg cylinders for reputed customers. The machine is simple to operate with minimum maintenance and operator has to simply load and unload the cylinders on rotating diabolic rollers.

the steel shots are used as blast cleaning media. The external surface of metallic lpg cylinders are required to be blast cleaned to remove rust, corrosion & prepare the surface for thermal coating and painting.

the machine is highly productive and featured with diabolic rollers arrangement, 2 high speed blasting wheels, shot recovery and cleaning system, dry dust collection unit and control panel.

the machine is suited for continuous working. The lpg cylinders are placed on motorized diabolic roller arrangement, which moves the cylinders forward as well as rotates inside the blast chamber. The cylinders are exposed to the shot stream through the twin blast wheel assembly for blast cleaning. The dust created during blasting is separated & collected in fabric bag dust collector and clean air is discharged to atmosphere keeping the environment clean and eco-friendly.
View Complete Details

Compressor Disc Springs

We offer Disc Springs for Compressor. To shot peen the round compressor parts & disc springs.
The job is placed on twin satellite from front of the cabinet. The indexing turntable carries it into blast chamber where satellite starts rotating at the blasting station. As job rotates, blast guns move horizontally across the job, thus, shot peen its external surface. The nozzle reciprocation arrangement is provided. After shot peening, the job is air washed before being lifted by the operator.
View Complete Details

Water Curtains

The spray painting is carried out by operator with the help of spray painting gun [Buyer to arrange spray painting gun]. The paint fume particles are sucked by the partial vacuum created by exhaust fan through a water curtain. The air is cleaned by scrubbing action in turbulent water. The particulate matter remains floating on water tank is periodically removed manually. The air discharged into the atmosphere is clean and thus keeps the environment clean and friendly.
View Complete Details

Shot Flow Controller

We offer Shot Flow Controller,
Precision Accurate.
View Complete Details

Roll Etching Machine

We have Roll Etching Machine for cold rolling industry. The rolls are etched for generating desired surface roughness so that the sheets being rolled out can have inbuilt roughness to facilitate proper bonding of paint. During the rolling process, the roll loses the surface roughness due to friction. Periodically, these rolls are etched for maintaining desired surface roughness.

the rolls being of harder nature, pressure type abrasive blasting machine using aluminium oxide, chilled iron grit of 12-25 mesh or steel shots of coarser grade are quite popular.

the blasting equipment is featured with motorized workcar with motorized job rotation facility . The roll is loaded outside the blasting cabinet on workcar which moves on track extension. The blasting nozzle reciprocates while job rotates in blasting cabinet. The operator is to simply load and unload the job. The abrasive recovery is automatic and fabric bag type dust collection system is incorporated to keep the dust emission level within permissible limits.
View Complete Details

Micro Blasting Machine

We have Micro Blasting Machine for drill bits & tool. Thin layer of oxide deposits on drill bits & tools. To blast clean that oxide layer mec shot has developed plc controlled automatic micro blast cleaning machine.

the operator place the job on satellites/ spindle. The indexing turn table carries it into blast chamber where satellite starts rotating. Each satellite have 8 spindles & rotates when come in contact of friction of timing belt.

features:

vertical gun reciprocation
horizontal lead screw inching system
plc-for sequence operation & parameter repeatability.
indexing turn table with satellite/spindles
cartridge type dust collector & reclaimer.
View Complete Details

Filling Valves

We offer Filling Valves, abrasive regulating valves, wear resistance valve longevity.
View Complete Details

Paint Baking Oven

In a conventional Convection type Oven the air inside the oven, the panels and the entire component is heated to the required temperature. In the process there are attendant heat losses and enormous amount of energy is consumed in direct proportion to the size & weight of the components, the oven etc. Subsequently, the component needs to be cooled to be able to be handled. The heat dissipated is released into the shed which again needs to be extracted out into the atmosphere.
View Complete Details

Roto Blast Tool (IRBT - 197)

We have Roto Blast Tool. Clean internal surface of pipe.
suitable for pipes of dia 360 mm to 914 mm & length upto 12 meters.
View Complete Details

Pass Blast Tool

We offer Pass Blast Tool (ipbt - 181).

cleans internal surface of pipe

suitable for pipes of dia 65 mm to 305 mm

provided with centering collar for pipe id of 127 - 305 mm
View Complete Details

Recovery Systems

We make mechanical Recovery Systems with floor sweeping operates with air operated pneumatic cylinders and rubber blades. During the blasting operation the abrasive falling down on the floor through the floor grating of the blast room is swept automatically by rubber blades operated with pneumatic cylinders. The swept abrasive falls in the cross screw hopper for conveying in the boot of the bucket elevator.

the abrasive is lifted by buckets in the bucket elevator and drops down for recycling in the blasting machine through the air wash system. The dust generated during the blasting operation is sucked by exhaust fan of dust collector/cyclone dust collection system.
View Complete Details

Belt Tumbler Machine

We offer Belt Tumbler Machine. The specially designed belt tumbler machine is used to blast clean small parts of different size. Machine is mainly used for cleaning of small automobile components of various shape and size.

to facilitate loading the machine incorporates a motorized belt tumbler. The blasting is accomplished through two pneumatically operated horizontal reciprocating blast nozzle.
View Complete Details

Almen Strip

We offer Almen Strip. Sae - 1070 cold rolled spring steel
finish blue temple.
uniformly hardened 44-50 hrc
we are authorised dealer for electronics inc., usa.
View Complete Details

Nozzle Holder

We offer Nozzle Holder and Nozzle Coupling.
aluminumsteelplastic body.
quick assembling.
light weight.
strain free grip.
View Complete Details

Almen Gauge Model

We offer Almen Gauge Model ms-sd (digital).
measuring range - .0001" - .025"

resolution - .0001

easy to read display

convenient battery replacement.
View Complete Details

Airfed Blaster Helmet

We offer Airfed Blaster Helmet ms - 2005

rubberized frp helmet.

provides the operators head protection.

saves from impact of abrasive.

extra large window for clear view.

waist length flexible cape.
View Complete Details

Remote Control System

We offer Remote Control System(rm - 100) & dead man handle:

remote onoff of machine.

provide added safety to operator.

saves abrasives & air consumption when operator change position.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Vaibhav Modi (Mec Shot Blasting Equipments Pvt. Ltd.)
  • E-279, Mia, Phase-ii, Basni, Jodhpur., Rajasthan - 342005, India
  • Share us via