Post Buy Requirement

Other Products / Services #3278832

ESD PCB Tray

  • Material Plastic
  • Color Black
  • Size 470mm*140mm*35mm
  • Application PCB Storage
  • Type I Type, L type
  • No of Slots 25
View Complete Details

ESD Knitted Dotted Glove

  • Color Grey
  • Application Industrial
  • Type Full Finger
  • Style Knitted
  • Packaging Size 10 Pair
  • Surface Resistance 10e6 - 10e8 ohm/cm
View Complete Details

Dispensing Needles

  • Material Plastic
  • Needle Gauge 14-27 G
  • Application Industrial
  • Inside Diameter .016 -.033"
  • Needle Length 1-1/4"
  • Pack 50 Pieces
  • Needle Color Blue, Pink, Green, Olive
View Complete Details

Conformal Coating

  • Packaging Type Can
  • Packaging Size 360 ML aerosole Can, 1 Litre, 5 Litre, 20 Litre
  • Density 0.92 g/cm3
  • Usage/Application Industrial
  • Recommended Coating Thickness 25 to 75 microns
  • Shelf Life at Room Temperature 24 months
View Complete Details

Soldering Stations

  • Brand Name Monarch
  • Power 70 Watt max
  • Model Number M70
  • Frequency 50-60 Hz
  • Temperature 200-450 degree C
  • Ambient Operating Temperature 10 - 40 degree C
  • Input Line Voltage 100 - 240 V AC, grounded circuit
View Complete Details

White Microfiber Wipes

  • Size 9 X 9 inch
  • Application Cleaning Dust, Water, Oil, Grease for clean room, Electronic Industrial etc
  • Quantity Per Pack 100 nos
  • Color White
  • Style Dry
  • Unit Pack
View Complete Details

Smt Ceramic Nozzles

Smt ceramic nozzle is used to place surface-mount devices on to a printed circuit board(pcb) made by ceramic material. Ceramic nozzle resolves plate & coated falling off, whitening & static magnetic problem to greatly improve nozzle operation and performance. To minimise the damage degree on the equipment. Especially, bosing nozzle made by special materials is lower wear rate and higher strength than normal, diamond coating on this special materails nozzle, also improve nozzle operation and performance.
View Complete Details

Receiver Head Assembly

  • Brand Name Metcal
  • Dimension 3 feet, 6 feet Hose
  • Application Industrial
  • Model Number 903, 905, 910, 93055
  • Receiver head Assemby 3cc-55cc
  • Unit Pack
View Complete Details

Syringe Barrel

  • Applications Industrial
  • Discharge Pressure 100 psi
  • Capacity 3cc, 5cc, 10cc, 30cc, 55cc
  • Color Black, Clear, Amber
  • Material Polypropylene
View Complete Details

Nonwoven Wipes

Introduction :1. high absorbency;2. low particles, good anti-static properity;3. good cleaning performance.
View Complete Details

Stencil Cleaning Rolls

We can offer all kinds of clean wiper for machine:minaimi, ekra, mpm, samsung, dek, yamaha, suneast, panasonic, kme make on demand.
View Complete Details

Lint Free Cloth Wipers

55 - 60 /Piece Get Latest Price
  • Material Non-woven Fabric
  • Size 4X4 inch, 6X6 inch, 9X9 inch
  • Material Nonwoven, 45% Polyester 55% cellulose
  • Application High Cleaning ability for Stencil. Soft, lint free & super absorbance.
  • SizeL S, M, L
  • Quantity Per Pack 600, 150
  • GSM 56
  • Packaging Type Packet
We are the supplier of this products.
View Complete Details

T Shirt Printing Machines

  • Type T-shirt Printing Machine
  • Weight 100-500kg, 1000-2000kg, 2000-4000kg, 500-1000kg
  • Color Black, Blue, Brown, Grey
  • Voltage 110V, 220V, 380V, 440V
  • Condition New, Used
  • Application Printing T-Shirt
  • Automatic Grade Automatic, Fully Automatic, Manual, Semi Automatic
  • Driven Type Electric, Hydraulic, Mechanic, Pneumatic
  • Warrenty 1Year, 2Years

We are the main supplier of this product.

View Complete Details

Spacer Tape

50 - 100 /Piece Get Latest Price
  • Min. Order (MOQ) 5 Piece(s)
  • Type Spacer Tape
  • Material Bopp Film, Cotton, Pe, Pet, Polyester, Polyimide, Ptfe Fabric, Soft Pvc
  • Application Bag Sealing, Carton Sealing, Decoration, Masking, Warning
  • Color Black, Brown, Creamy, Grey, Multicolor, Off White
  • Design Offer Printing, Plain
  • Packaging Type Corrugated Box, Paper Box, Plastic Box
  • Adhesive Side Double Sided
  • Feature Antistatic, Heat Resistant, High Voltage Resist, Holographic, Long Life, Printed
View Complete Details

Tension Meter

20,700 - 21,000 /Piece Get Latest Price
  • Min. Order (MOQ) 1 Piece(s)
  • Type Tension Meter
  • Weight 100-200gm, 200-300gm, 300-400gm, 400-500g
  • Color Brown, Green, Grey, Maroon, Red, White, Yellow
  • Display Type Digital
  • Automatic Grade Automatic, Fully Automatic, Manual, Semi Automatic
  • Body Material Aluminum, Brass, Cast Iron, Copper, Plastic, Stainless Steel
  • Power Source Battery, Electric
  • Feature Accuracy, Durable, Light Weight, Lorawan Compatible, Low Power Comsumption, Multi Jet
  • Warranty 1Year, 2Years
View Complete Details

ESD Aprons

255 - 300 /Pair Get Latest Price
  • Min. Order (MOQ) 10 Piece(s)
  • Size L, M, S
  • Type Esd Aprons
  • Material Cotton, Denim, LDPE, Linen, Nylon, Polyester, PVC
  • Color Pink, Multicolor, Orange, White, Yellow
  • Gender Female, Male
  • Pattern Pattern, Plain
  • Application Clinic, Cooking, Hospital
  • Feature Anti-Wrinkle, Comfortable, Easily Washable, Impeccable Finish, Skin Friendly
View Complete Details

Heat Press Machine

24,000 - 25,000 /Piece Get Latest Price
  • Type Heat Press Machine
  • Application Sealing
  • Warranty 1 Year, 2 Year
  • Automatic Grade Semi-Automatic, Fully Automatic, Manually Automatic
  • Voltage 110V, 220V, 280V
  • Color Silver, Grey, Black
  • Condition New, Old
View Complete Details

Dispensing Robots

Techcon has specially designed dispensing robots to use in a variety of applications for fluid dispensing. This dispensing system offers superior control over the placement of fluids, including arcs, beads, circles and repeated timed dots.
View Complete Details

Dispensing Valves

Techcon systems is an industry leader in fluid dispensing innovation. The selection of fluid dispensing valves provides reliability and accuracy in fluid control. We offer the top engineering for handheld valves, precision micro-shot dispensing, and valves that can handle a range of materials.a wide variety of valves are available in order to meet your fluid control requirements.
View Complete Details

Cartridge Mixer

Cartridge mixer for 20 oz. (591ml) kit. the ts6500 series cartridge mixer provides complete automatic mixing of two-component material filled in a cartridge kit. The features rich ts6500 series accommodates all standard size cartridge kits ranging from 2.5 oz (74ml) to 20 oz. (591ml) and is immediately usable anywhere in the world with its accompanying tools, accessories and universal power supply.
View Complete Details

Syringe Barrels

Techcon Systems offers syringe barrels designed for easy application of a variety of materials. Our barrels work with industry standard equipment to apply precise amounts of fluid. The barrels are made from low friction polypropylene to ensure correct applications and contain no silicone or chloride.
View Complete Details

Heraeus Smt Adhesive Dispensing

Pd 955 m is a thermosetting single-component, solvent-freepolymer adhesive, developed especially for the surfacemounting of smt components on to pcbs and for use onbare substrates.the rheology is especially adapted for high-speed dispensing.it allows for very low z-height-returns.
View Complete Details

Heraeus Smt Adhesive Printing

Pd 955 py is a thermosetting single-component, solventfreepolymer adhesive, developed especially for the surfacemounting of smt components on to pcbs and for use onbare substrates.the rheology is especially adapted for printing applicationwith thick stencils.the adhesive is suitable for printing with metal and plasticstencils.
View Complete Details

Kic Profiler

Kic is committed to providing innovation that works. We are dedicated to total thermal process improvement and total customer satisfaction. Our innovative products and services are designed to improve a variety of thermal monitoring, profiling and process control applications.
View Complete Details

Dispensing Tips

Techcon range of dispensing tips suited for a variety of liquids and adhesives. Choose the right size, angle, and tip type to increase your dispensing accuracy and efficiency. Our tip hubs do not contain silicone or chloride, and they are burr-free in order to provide consistent flow.
View Complete Details

Electric Screw Driver

Sudong - founded in 1998, Sudong specialised in brushless electric screw drivers, torque testers and peripheral products development, production. The company has engaged in the development, production with qualified technical personnel and excellent management team, adhering to the continued pursuit of excellence and innovative service concept. From design and development to manufacturing process have adopted a series of professional high-precision machining equipment, and strive to create the industry's highest quality service to all customers.
View Complete Details

Kic Profiling Equipments

Kic is committed to providing innovation that works. We are dedicated to total thermal process improvement and total customer satisfaction. Our innovative products and services are designed to improve a variety of thermal monitoring, profiling and process control applications
View Complete Details

Heraeus Lead Free Solder Pastes

F 640 solder paste series is a state-of-the-art lead free no clean solder paste that promotes wetting and minimises soldering defects. The f 640 flux system is specifically optimised for snagcu alloy soldering. Extensive testing at customer locations has proven this paste to be capable of defect-free performance in theproduction environment.the f 640 series exhibits minimal slump and has excellent print-after-wait performance. This formula provides superior performance on a variety of surfaces finishes and leaves behind a clearresidue. Reflow can be accomplished in air or nitrogen.
View Complete Details

Zestron Cleaning Chemicals

Zestron is the global market and technology leader for cleaning products and services for high precision cleaning applications. Zestron offers the worlds leading cleaning media, but more importantly focuses on being an architect for reliable cleaning processes within electronic and metal parts cleaning applications. Since their incorporation in 1975, zestrons main focus has been to offer our customers the most innovative products and customized process solutions with the best possible support. It is our goal to develop the ideal process for your specific application.you can test all zestron products free of charge at our five technical centers in europe, america or asia. The technical centers with more than 35 cleaning machines from leading system manufacturers, offer you the opportunity to carry out free product trials in all types of systems.
View Complete Details

Humiseal Conformal Coatings

Humiseal europe provides the widest selection of products to meet its customer's tough electrical and environmental requirements. It has led the way for over 50 years and today stands out as a uniquely experienced and dynamic company. It manufactures over 60 coatings, thinners, strippers and masking materials and can also offer custom formulations to meet unusual specifications. Humiseal products are qualified to mil-i-46058c, iec 60664-3, iec 61086 and ipc-cc-830 standards.
View Complete Details

Splice Tape

Khj - founded in 1999, khj specializes on researching, producing and selling special industrial tape and parts for ems.khj has established production base in shanghai and shenzhen equipped with advanced production equipment, comprehensive management system, qualified quality system, excellent management team; thanks to khj r&d center in shenzhen, khj has achieved a number of patents and a number of core technology and has odm and oem capabilities for special products.khj dedicates to become a global, innovative, responsible and public for the solution of smt splice and identification system area and the leader of segment market.
View Complete Details

Economy Reflow Ovens

Eps - fifteen years after its inception, eps worldwide turned into leader in manufacturing of high-tech production machines and systems. Our state-of-art machines and system designed and developed for the worldwide electronic industry are on par with the highest international standards.
View Complete Details

Wave Soldering Machine

Manufactures a range of machines for al1l lead and lead-free wave soldering applications from benchtop to high production floor models, with solder wave configurations from 7 to 24 inches (180mm to 609.6mm) wide. Lead or Lead-Free solder compatibilitySingle or dual wave soldering capabilityFlexibility with quick change, motorized lead or lead-free solder potsIncrease through hole soldering speed with dual wave soldering capability
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Manish Agarwal (Mectronics Marketing Services)
  • 535, 2nd Floor, Patparganj Industrial Area, Delhi
  • Share us via
  • Call 08068051378 Ext. 404
List of Other Products by Mectronics Marketing Services from Delhi, Delhi.
Post Buy Requirement

Other Products / Services #3278832

ESD PCB Tray

  • Material Plastic
  • Color Black
  • Size 470mm*140mm*35mm
  • Application PCB Storage
  • Type I Type, L type
  • No of Slots 25
View Complete Details

ESD Knitted Dotted Glove

  • Color Grey
  • Application Industrial
  • Type Full Finger
  • Style Knitted
  • Packaging Size 10 Pair
  • Surface Resistance 10e6 - 10e8 ohm/cm
View Complete Details

Dispensing Needles

  • Material Plastic
  • Needle Gauge 14-27 G
  • Application Industrial
  • Inside Diameter .016 -.033"
  • Needle Length 1-1/4"
  • Pack 50 Pieces
  • Needle Color Blue, Pink, Green, Olive
View Complete Details

Conformal Coating

  • Packaging Type Can
  • Packaging Size 360 ML aerosole Can, 1 Litre, 5 Litre, 20 Litre
  • Density 0.92 g/cm3
  • Usage/Application Industrial
  • Recommended Coating Thickness 25 to 75 microns
  • Shelf Life at Room Temperature 24 months
View Complete Details

Soldering Stations

  • Brand Name Monarch
  • Power 70 Watt max
  • Model Number M70
  • Frequency 50-60 Hz
  • Temperature 200-450 degree C
  • Ambient Operating Temperature 10 - 40 degree C
  • Input Line Voltage 100 - 240 V AC, grounded circuit
View Complete Details

White Microfiber Wipes

  • Size 9 X 9 inch
  • Application Cleaning Dust, Water, Oil, Grease for clean room, Electronic Industrial etc
  • Quantity Per Pack 100 nos
  • Color White
  • Style Dry
  • Unit Pack
View Complete Details

Smt Ceramic Nozzles

Smt ceramic nozzle is used to place surface-mount devices on to a printed circuit board(pcb) made by ceramic material. Ceramic nozzle resolves plate & coated falling off, whitening & static magnetic problem to greatly improve nozzle operation and performance. To minimise the damage degree on the equipment. Especially, bosing nozzle made by special materials is lower wear rate and higher strength than normal, diamond coating on this special materails nozzle, also improve nozzle operation and performance.
View Complete Details

Receiver Head Assembly

  • Brand Name Metcal
  • Dimension 3 feet, 6 feet Hose
  • Application Industrial
  • Model Number 903, 905, 910, 93055
  • Receiver head Assemby 3cc-55cc
  • Unit Pack
View Complete Details

Syringe Barrel

  • Applications Industrial
  • Discharge Pressure 100 psi
  • Capacity 3cc, 5cc, 10cc, 30cc, 55cc
  • Color Black, Clear, Amber
  • Material Polypropylene
View Complete Details

Nonwoven Wipes

Introduction :1. high absorbency;2. low particles, good anti-static properity;3. good cleaning performance.
View Complete Details

Stencil Cleaning Rolls

We can offer all kinds of clean wiper for machine:minaimi, ekra, mpm, samsung, dek, yamaha, suneast, panasonic, kme make on demand.
View Complete Details

Lint Free Cloth Wipers

55 - 60 /Piece Get Latest Price
  • Material Non-woven Fabric
  • Size 4X4 inch, 6X6 inch, 9X9 inch
  • Material Nonwoven, 45% Polyester 55% cellulose
  • Application High Cleaning ability for Stencil. Soft, lint free & super absorbance.
  • SizeL S, M, L
  • Quantity Per Pack 600, 150
  • GSM 56
  • Packaging Type Packet
We are the supplier of this products.
View Complete Details

T Shirt Printing Machines

  • Type T-shirt Printing Machine
  • Weight 100-500kg, 1000-2000kg, 2000-4000kg, 500-1000kg
  • Color Black, Blue, Brown, Grey
  • Voltage 110V, 220V, 380V, 440V
  • Condition New, Used
  • Application Printing T-Shirt
  • Automatic Grade Automatic, Fully Automatic, Manual, Semi Automatic
  • Driven Type Electric, Hydraulic, Mechanic, Pneumatic
  • Warrenty 1Year, 2Years

We are the main supplier of this product.

View Complete Details

Spacer Tape

50 - 100 /Piece Get Latest Price
  • Min. Order (MOQ) 5 Piece(s)
  • Type Spacer Tape
  • Material Bopp Film, Cotton, Pe, Pet, Polyester, Polyimide, Ptfe Fabric, Soft Pvc
  • Application Bag Sealing, Carton Sealing, Decoration, Masking, Warning
  • Color Black, Brown, Creamy, Grey, Multicolor, Off White
  • Design Offer Printing, Plain
  • Packaging Type Corrugated Box, Paper Box, Plastic Box
  • Adhesive Side Double Sided
  • Feature Antistatic, Heat Resistant, High Voltage Resist, Holographic, Long Life, Printed
View Complete Details

Tension Meter

20,700 - 21,000 /Piece Get Latest Price
  • Min. Order (MOQ) 1 Piece(s)
  • Type Tension Meter
  • Weight 100-200gm, 200-300gm, 300-400gm, 400-500g
  • Color Brown, Green, Grey, Maroon, Red, White, Yellow
  • Display Type Digital
  • Automatic Grade Automatic, Fully Automatic, Manual, Semi Automatic
  • Body Material Aluminum, Brass, Cast Iron, Copper, Plastic, Stainless Steel
  • Power Source Battery, Electric
  • Feature Accuracy, Durable, Light Weight, Lorawan Compatible, Low Power Comsumption, Multi Jet
  • Warranty 1Year, 2Years
View Complete Details

ESD Aprons

255 - 300 /Pair Get Latest Price
  • Min. Order (MOQ) 10 Piece(s)
  • Size L, M, S
  • Type Esd Aprons
  • Material Cotton, Denim, LDPE, Linen, Nylon, Polyester, PVC
  • Color Pink, Multicolor, Orange, White, Yellow
  • Gender Female, Male
  • Pattern Pattern, Plain
  • Application Clinic, Cooking, Hospital
  • Feature Anti-Wrinkle, Comfortable, Easily Washable, Impeccable Finish, Skin Friendly
View Complete Details

Heat Press Machine

24,000 - 25,000 /Piece Get Latest Price
  • Type Heat Press Machine
  • Application Sealing
  • Warranty 1 Year, 2 Year
  • Automatic Grade Semi-Automatic, Fully Automatic, Manually Automatic
  • Voltage 110V, 220V, 280V
  • Color Silver, Grey, Black
  • Condition New, Old
View Complete Details

Dispensing Robots

Techcon has specially designed dispensing robots to use in a variety of applications for fluid dispensing. This dispensing system offers superior control over the placement of fluids, including arcs, beads, circles and repeated timed dots.
View Complete Details

Dispensing Valves

Techcon systems is an industry leader in fluid dispensing innovation. The selection of fluid dispensing valves provides reliability and accuracy in fluid control. We offer the top engineering for handheld valves, precision micro-shot dispensing, and valves that can handle a range of materials.a wide variety of valves are available in order to meet your fluid control requirements.
View Complete Details

Cartridge Mixer

Cartridge mixer for 20 oz. (591ml) kit. the ts6500 series cartridge mixer provides complete automatic mixing of two-component material filled in a cartridge kit. The features rich ts6500 series accommodates all standard size cartridge kits ranging from 2.5 oz (74ml) to 20 oz. (591ml) and is immediately usable anywhere in the world with its accompanying tools, accessories and universal power supply.
View Complete Details

Syringe Barrels

Techcon Systems offers syringe barrels designed for easy application of a variety of materials. Our barrels work with industry standard equipment to apply precise amounts of fluid. The barrels are made from low friction polypropylene to ensure correct applications and contain no silicone or chloride.
View Complete Details

Heraeus Smt Adhesive Dispensing

Pd 955 m is a thermosetting single-component, solvent-freepolymer adhesive, developed especially for the surfacemounting of smt components on to pcbs and for use onbare substrates.the rheology is especially adapted for high-speed dispensing.it allows for very low z-height-returns.
View Complete Details

Heraeus Smt Adhesive Printing

Pd 955 py is a thermosetting single-component, solventfreepolymer adhesive, developed especially for the surfacemounting of smt components on to pcbs and for use onbare substrates.the rheology is especially adapted for printing applicationwith thick stencils.the adhesive is suitable for printing with metal and plasticstencils.
View Complete Details

Kic Profiler

Kic is committed to providing innovation that works. We are dedicated to total thermal process improvement and total customer satisfaction. Our innovative products and services are designed to improve a variety of thermal monitoring, profiling and process control applications.
View Complete Details

Dispensing Tips

Techcon range of dispensing tips suited for a variety of liquids and adhesives. Choose the right size, angle, and tip type to increase your dispensing accuracy and efficiency. Our tip hubs do not contain silicone or chloride, and they are burr-free in order to provide consistent flow.
View Complete Details

Electric Screw Driver

Sudong - founded in 1998, Sudong specialised in brushless electric screw drivers, torque testers and peripheral products development, production. The company has engaged in the development, production with qualified technical personnel and excellent management team, adhering to the continued pursuit of excellence and innovative service concept. From design and development to manufacturing process have adopted a series of professional high-precision machining equipment, and strive to create the industry's highest quality service to all customers.
View Complete Details

Kic Profiling Equipments

Kic is committed to providing innovation that works. We are dedicated to total thermal process improvement and total customer satisfaction. Our innovative products and services are designed to improve a variety of thermal monitoring, profiling and process control applications
View Complete Details

Heraeus Lead Free Solder Pastes

F 640 solder paste series is a state-of-the-art lead free no clean solder paste that promotes wetting and minimises soldering defects. The f 640 flux system is specifically optimised for snagcu alloy soldering. Extensive testing at customer locations has proven this paste to be capable of defect-free performance in theproduction environment.the f 640 series exhibits minimal slump and has excellent print-after-wait performance. This formula provides superior performance on a variety of surfaces finishes and leaves behind a clearresidue. Reflow can be accomplished in air or nitrogen.
View Complete Details

Zestron Cleaning Chemicals

Zestron is the global market and technology leader for cleaning products and services for high precision cleaning applications. Zestron offers the worlds leading cleaning media, but more importantly focuses on being an architect for reliable cleaning processes within electronic and metal parts cleaning applications. Since their incorporation in 1975, zestrons main focus has been to offer our customers the most innovative products and customized process solutions with the best possible support. It is our goal to develop the ideal process for your specific application.you can test all zestron products free of charge at our five technical centers in europe, america or asia. The technical centers with more than 35 cleaning machines from leading system manufacturers, offer you the opportunity to carry out free product trials in all types of systems.
View Complete Details

Humiseal Conformal Coatings

Humiseal europe provides the widest selection of products to meet its customer's tough electrical and environmental requirements. It has led the way for over 50 years and today stands out as a uniquely experienced and dynamic company. It manufactures over 60 coatings, thinners, strippers and masking materials and can also offer custom formulations to meet unusual specifications. Humiseal products are qualified to mil-i-46058c, iec 60664-3, iec 61086 and ipc-cc-830 standards.
View Complete Details

Splice Tape

Khj - founded in 1999, khj specializes on researching, producing and selling special industrial tape and parts for ems.khj has established production base in shanghai and shenzhen equipped with advanced production equipment, comprehensive management system, qualified quality system, excellent management team; thanks to khj r&d center in shenzhen, khj has achieved a number of patents and a number of core technology and has odm and oem capabilities for special products.khj dedicates to become a global, innovative, responsible and public for the solution of smt splice and identification system area and the leader of segment market.
View Complete Details

Economy Reflow Ovens

Eps - fifteen years after its inception, eps worldwide turned into leader in manufacturing of high-tech production machines and systems. Our state-of-art machines and system designed and developed for the worldwide electronic industry are on par with the highest international standards.
View Complete Details

Wave Soldering Machine

Manufactures a range of machines for al1l lead and lead-free wave soldering applications from benchtop to high production floor models, with solder wave configurations from 7 to 24 inches (180mm to 609.6mm) wide. Lead or Lead-Free solder compatibilitySingle or dual wave soldering capabilityFlexibility with quick change, motorized lead or lead-free solder potsIncrease through hole soldering speed with dual wave soldering capability
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Manish Agarwal (Mectronics Marketing Services)
  • 535, 2nd Floor, Patparganj Industrial Area, Delhi
  • Share us via
  • Call 08068051378 Ext. 404